Vacuum Trap

…most advanced vacuum trap system. Ideal for protection of vacuum lines and scientists alike, Vactrap safely contains waste from supernatant removal, chemical separation, and cell or tissue culture media aspiration. Best of all, Vactrap comes ready to use--simply attach to your vacuum and begin your…

…Trap connects in series with a freeze dry system or vacuum evaporation system and vacuum pump to prevent contaminants from migrating into the vacuum pump. An insulated well, when dry ice and solvent are added, cools to approximately -75° C (-103° F). When used alone, Dry Ice Secondary Trap…

Made of borosilicate glass, these vacuum traps consist of two pieces with a straight top stem. Both inlet and outlet stems are integral with the stopper. Body and stopper are connected by a full length Standard Taper joint.

Outlets are 180º apart for easy installation into a variety of vacuum systems. Protects the mechanical pump from attack by corrosive vapors which can be condensed by using liquid nitrogen or dry ice/slurry mixtures. Two-piece construction allows removal of condensate.

Vacuum trap with joint to facilitate cleaning. Available modified with top tube bent in line with side tube, but in opposite direction.

Two-piece vacuum trap with #15 o-ring joints on both the inlet and outlet ports. The seal between the trap stopper and body is made with a 57mm flat o-ring flange for total grease-free operation when used with either the AF-0060 or AF-0061 manifolds. Trap body is 57mm OD x 300mm in length to be used…

Vacuum Trap, Hose Connections Available in multiple sizes with various joint sizes, diameter, length, and inner/side tube size.

Two piece vacuum trap connected with an inner and outer joint to facilitate cleaning.

Vacuum Trap, Cylindrical Available in multiple sizes with various joint sizes, diameter, length, and inner/side tube size.

Same as 8750 except top is bent in line with side tube.,/p>

Vacuum trap and cap are made from corrosion and chemical-resistant polypropylene to provide ideal protection of vacuum sources from contaminants. Tube volume is 100mL; measures 32 x 160mm L Pressure-fittting cap features an inlet and outlet to fit 7.9mm (5/16") ID tubing …

…for use with PTFE Ace-Safe connectors to allow safe easy tubing connect-disconnect. Simply attach tubing to serrated end of adapter, via bushing/connector to inlet and outlet of trap. Unmodified version NOT supplied wtih adapter. Complete item consists of body, inner tube, and Nylon bushing.

…advanced vacuum trap system. Ideal for protection of vacuum lines and scientists alike, VactrapXL safely contains waste from supernatural removal, chemical separation, and cell or tissue culture media aspiration. Best of all, VactrapXL™ comes ready to use; simply attach to your vacuum and…

…in vacuum systems and protect the laboratory. Excellent for protecting vacuum pump systems from solvent vapor or gaseous contaminants and aqueous aerosols. Designed for in-line use with stepped barb connections for 10 to 12 mm i.d. hose. Available with choice of chemical trap: activated…

…inserts without removing trap from vacuum system 4.5 inch trap serves vacuum pumps up to 100 Lpm (4 CFM); 9.5 inch serves pumps ranging from 150 to 500 Lpm (5-15 CFM) Filter element is copper gauze with large surface area to trap particles and oil vapors Two size traps offer two connections…

Used for freezing out undesired vapors in the vacuum system and also for use in conjunction with Dewar flasks.

…Rotavapor® R-100. The ready to use vacuum pump will be delivered with a silencer and 2m of vacuum tubing. All Models Capacity, Final Vacuum 1.5 m3/h, 10 mbar 1190U86 Condensation assembly: Secondary cold trap Vacuum Controller: I-100 (Manual, Timer) Woulff…

These borosilicate glass vacuum traps have a Standard Taper joint to ease disassembly and allow cleaning/draining. The sidearm 3/8" hose connectors are 180° apart with a bent top stem and provide an easy connection when using rubber tubing. See LG-11020 for body only.

…traps: activated carbon, molecular sieve, or desiccant. Excellent for protecting vacuum pump systems from solvent vapor or gaseous contaminants and aqueous aerosols. Designed for in-line use with stepped barb connections for 10 to 12 mm i.d. hose. Available with choice of chemical trap:…

Vacuum Trap Assembly, Dual Joints: #15 O-ring, with high vaccum valves

…International 500mL glass trap for Ai 2nd Gen T40 -40°C UL/CSA certified cold traps. Upward hose barb ports give you safer and easier vacuum tubing connection and removal. Attention! This new glass trap ONLY fits our new 2nd Gen UL/CSA certified T40 -40°C cold traps (released 9/2018).

For use with vacuum manifolds having 35/20 socket joints. Please order the pump adapter and socket clamp separately.

Similar to CG-4515 traps but having an o-ring joint to connect the trap body to the stopper. O-ring joint provides for a vacuum tight, grease free seal and permits the trap body to be easily disconnected from the stopper for cleaning. Serrated hose connections are 13.5mm at the smallest serration…

The aspirator with trap flask FTA-1 with a 1L trap flask is designed for the aspiration or removal of any remaining alcohol or buffer from microtest tube walls during DNA / RNA purification and other macromolecule re-precipitation techniques. An ideal personal tool for independent operation…

Twin chamber vacuum trap for double protection against undesired vapors in a vacuum system. Trap can be used in a two liter Dewar flask such as 12540-07. Distance from outside of one body to outside of other is approximately 97mm; height is 250mm. Inlet and outlet have serrated fittings; O.D. of…

Vacuum Trap, Large Volume Capacity: 500 and 1000mL available.

The Vacuum Bottle Trap is a useful tool for easy and continuous liquid aspiration with vacuum when aspirating tissue culture media, wash solutions, supernatant fluids after centrifugation, chemical waste, etc. The Aspirator Bottle safely retains up to 1600 mL (54 oz) of fluids while the…

Vacuum Trap Kit with Spherical Joints. Includes trap body, top adapter, middle adapter, bottom adapter, and clamps. Body OD: 50mm, Body Length: 360mm

Vacuum trap system protects gauge heads, like our 14034, and pumps from corrosive vapors and particle fouling. System consists of a Dewar flask, cold trap and inlet arm. High-vacuum stopcocks are used throughout. Gauge & inlet arm are Ace-Thred connections. Pump & manifold connections are o-ring…

Thomas No. 1166W00 Trap, stopper, vacuum, bent vertical tube, 29/32 Thomas No. 1166W01 Trap, vacuum, complete, bent vertical tube, 29/32, 32mm od outer²body, 13mm od inner/side tube,body length 250mm below joint Thomas No. 1166W02 Trap, stopper, vacuum, bent vertical tube,…

Prevents corrosion by acid and alkaline vapors, moisture, etc., entrained during evacuation of distilling apparatus, vacuum desiccators, etc. Freezing trap, when immersed in suitable freezing mixture, removes condensable vapors, gauge liquid or other foreign material accidentally introduced…

With both arms in vertical position. 60mm O.D. x 250mm long. Side arms are 12mm O.D. Available with or without serrated connections on arms. Serrated connectors have six rings: the smallest, 14mm O.D.; largest, 16mm O.D.