Vacuum Trap Flask

Compare Tool

Select up to 3 products

Vacuum Trap Flask
1 - 30 of 30
Sort
View
Show

Corning

  • Vacuum Trap

    Ace Glass

    Used for freezing out undesired vapors in the vacuum system and also for use in conjunction with Dewar flasks.

  • Aspirator with Trap Flask

    Grant Instruments

    The aspirator with trap flask FTA-1 with a 1L trap flask is designed for the aspiration or removal of any remaining alcohol or buffer from microtest tube walls during DNA / RNA purification and other macromolecule re-precipitation techniques. An ideal personal tool for independent operation…

  • Two piece cold trap style condenser for use with rotary evaporators. Condenser has an additional 19/38 outer joint sealed onto the condenser to allow continuous feed of volumes exceeding the capacity of the evaporating flask. The 19/38 joint is sealed at an angle which allows the condensate to fall…

  • Vacuum Aspirator 1.0gal

    Bel-Art - SP Scienceware

    …aspirate and collect fluids using a vacuum source Holds 3200ml (108oz) and the included trap prevents fluid flow into the vacuum source Use to aspirate media, waste chemicals, cell washing solutions, and more Ideal for use with dishes, plates, flasks and tubes All parts, except the…

  • …with condensate trap and non-return valve with attachment for Rotavapor (not necessary with V-700/710 in stand-alone systems). 1229D82 - Buchi RC-81 remote control can be used to control the vacuum controller and the Rotavapor: rotation, starting/stopping and raising/lowering of the flask.

  • trap is very cold. Features Utilizes dry ice for optimal efficiency Comes with scissor jack for easy collection flask removal Easy to clean all glass construction Small footprint Setup in a few minutes Free six feet 3/8" white premium food grade silicone vacuum

  • FTA-2i Advanced Aspirator

    Grant Instruments

    …polypropylene trap flask Fitted with hydrophobic microbiological filter Vacuum pressure: -200 to -800mbar (adjustable) Overflow protection - liquid level sensor detects excess liquid and prevents overflow The use of an aspirator is preferential to using a generic laboratory vacuum line…

  • Vactrap™ Vacuum Trap System

    Foxx Life Sciences

    …most advanced vacuum trap system. Ideal for protection of vacuum lines and scientists alike, Vactrap safely contains waste from supernatant removal, chemical separation, and cell or tissue culture media aspiration. Best of all, Vactrap comes ready to use--simply attach to your vacuum and begin your…

  • …Secondary Condensers Vacuum Pump V-700/710 compact high performance condensers for producing maximum condensation of residual solvent vapor after the pump. At the same time it separates any liquid solvent from the pump, putting it directly into the receiving flask. Insulation sleeves prevent…

  • Scienceware® Vacuum Aspirator Bottle

    Bel-Art - SP Scienceware

    …of fluids while the attached trap protects the vacuum source from accidental fluid backflow. A flexible collection tube reaches from the bottle and accepts disposable 1 mL pipet tips, glass Pasteur or 2 mL pipets for work with Petri dishes, microtiter plates, flasks and centrifugal tubes. The small…

  • Vacuum Pump V-700/710 compact high performance condensers for producing maximum condensation of residual solvent vapor after the pump. At the same time it separates any liquid solvent from the pump, putting it directly into the receiving flask. Insulation sleeves prevent the formation of undesirable…

  • Twin chamber vacuum trap for double protection against undesired vapors in a vacuum system. Trap can be used in a two liter Dewar flask such as 12540-07. Distance from outside of one body to outside of other is approximately 97mm; height is 250mm. Inlet and outlet have serrated fittings; O.D. of…

  • Borosil® Reagent Bottles are perfect for storing media, solvents, and other materials. Sturdy ground glass necks for long-term durability. Solid glass flat-head stoppers, easy-to-read graduations and capacities, marking spots for labeling. Mechanically strong, chemically…

  • …Glass Assembly: C (Cold trap) for low boiling point solvents Protective Coating: Without Recirculating Chiller: Without Vacuum Controller: I-100, with Woulff bottle Vacuum Pump: V-100, 1.5 m3/h, 10 mbar 1190U73 Glass Assembly: C (Cold trap) for low boiling point…

  • …the main trap assembly. Both traps can be isolated from the line for cleaning by the 0-12mm Chem-Vac™; Chem-Cap®; valves Spacing between the two traps is 175mm for easy placement of dewar flasks. Complete system consists of one 5-port vacuum/inert manifold, one pre-trap, one main trap

  • …Includes BY Vertical Condenser 048177, 1L receiving flask, receiving flask clip, stopcock, PTFE fill tubes, and set of GL-14 hose connections and caps, AND distribution head, distribution head shut off tap, reflux screw cap accessory, vacuum connector 1230E22 - Glass Assembly A Verical…

  • Two-piece vacuum trap with #15 o-ring joints on both the inlet and outlet ports. The seal between the trap stopper and body is made with a 57mm flat o-ring flange for total grease-free operation when used with either the AF-0060 or AF-0061 manifolds. Trap body is 57mm OD x 300mm in length to be used…

  • Vacuum trap system protects gauge heads, like our 14034, and pumps from corrosive vapors and particle fouling. System consists of a Dewar flask, cold trap and inlet arm. High-vacuum stopcocks are used throughout. Gauge & inlet arm are Ace-Thred connections. Pump & manifold connections are o-ring…

  • Primarily designed for use with ACE 8051 bearings. The inner tube through which the stirring shaft passes, plus the PTFE O-Ring supplied with each unit, prevents the lubricant or foreign particles from contaminating the flask contents. For replacement PTFE ring, order 8113-89.

  • vacuum evaporation with a SpeedVac® Concentrator which are then collected in a CFC-free Refrigerated Vapor Trap (RVT).   Solvent vapors pass into a Glass Condensation Flask and condense on its walls. This prevents the vapors from reaching and potentially damaging the oil-sealed vacuum

  • Modified version of 8750 series of vacuum traps, with side arm bent 90 degrees upward for easier attachment of vacuum tubing. For use with vacuum systems to capture undesirable vapors. Fits easily into Dewar flasks.

  • …recover solvents with the Savant™ SpeedVac™ Universal Vacuum Systems, equipped with an easy to use, wide-mouth glass condensation flask. This single integrated unit combines an oil-free vacuum source and refrigerated vapor trap, and can be connected to any of the concentrators to provide…

  • Thermo Scientific™ Savant™ SpeedVac™ SPD1030 and SPD2030 Vacuum Concentrators are fully integrated systems that combine concentrator, refrigerated cold trap, diaphragm pump and vacuum gauge in a single, compact unit. Convenience and Flexibility in two capacity ranges The…

  • Thermo Scientific™ Savant™ SpeedVac™ SPD1030 and SPD2030 Vacuum Concentrators are fully integrated systems that combine concentrator, refrigerated cold trap, diaphragm pump and vacuum gauge in a single, compact unit. Convenience and Flexibility in two capacity ranges The…

  • …of solvents or other volatiles by vacuum distillation at ambient temperature. When used with Schlenk reaction Vessel, No. 7756, the trap prevents excessive loss of solution in the event of a bump. The distillate is collected in a No. 9477 pear shaped flask or other suitable receiver and cooled…

  • In collaboration with Borosil® Glass Works, India, Foxx Life Sciences is proud to bring the outstanding quality of Borosil®’s USP Type 1 Borosilicate glassware to North America for the first time. Manufactured from the same low-expansion, chemically resistant Borosilicate glass North…

  • In collaboration with Borosil® Glass Works, India, Foxx Life Sciences is proud to bring the outstanding quality of Borosil®’s USP Type 1 Borosilicate glassware to North America for the first time. Manufactured from the same low-expansion, chemically resistant Borosilicate glass North…

  • …cleaner and prolong your vacuum pump life, by further condensing vapor coming out of your rotary evaporators. Comes with two 3/8" hose barb connectors, and a detachable bottle holder. Glass Cold Trap (Dry Ice) Condenser High quality glass cold trap (dry ice) condenser with lid.…

  • …1/2" or 3/4" flask adapters. For field installation. Isolation valve isolates Tray Dryer from Freeze Dryer. Includes couplings, clamps and instruction sheet. To be used with FreeZone 6L, 12L or 18L Console and Stoppering Tray Dryer or Bulk Tray Dryer. 1 EA. Vacuum Hose For Use With…

  • Extraction System

    Avantor - J.T.Baker®

    …gasket. Requires suitable external vacuum source such as water aspirator or vacuum pump. Accessory racks can be substituted for automatic samplers. Without vacuum source, vacuum tubing or vacuum trap. Normally, a 500 mL or larger vacuum filter flask is used as trap. Extraction columns are prepacked…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.