Vacuum Manifold

Compare Tool

Select up to 3 products

Vacuum Manifold
1 - 32 of 274
Sort
View
Show
  • manifold can accomodate 90mm holders. Use 47mm or smaller holder units on the 6-place model. Valves have a PTFE stopcock. Available with 2-way or 3-way valves. Use the 3-way valve when the manifold is used under closed conditions and must be vented to the atmosphere without breaking the vacuum

  • …Flexible sample collection rack will accommodate a variety of receiving vessels Quick vacuum-release valve for better system control Individual valves allow vacuum control for each cartridge, improving reproducibility NOTE: Replacement waste container not included in 24-port manifold kit.

  • …allows the manifold to be vented to atmosphere when used under closed conditions without breaking the vacuum connection. The valves luer slip vent port accepts a disposable syringe filter (13JP020AN) or KS13 holder with PTFE filter (J020A013A) to maintain sterility. The manifold outlet is…

  • Accessories for Combisart and Microsart Combi.jet Vacuum Manifolds.

  • Stainless Steel Vacuum Manifold

    Thermo Scientific Nalgene

    Nalgene 345 Solid and stable on the bench top Designed with three vacuum outlets, each with leakproof, two-way valve and vent port Each outlet securely holds a No. 8 stopper and the stem filter funnel without interference Autoclavable Easy manipulation of individual funnels…

  • …extractions. Unlike other vacuum manifolds, the Visiprep system contains a patented valve system that allows for precise flow control through each SPE tube via rotating, independent, screw-type valves situated in each port within the manifold cover. Visiprep vacuum manifolds allow you to process up…

  • Vacuum Manifolds

    Chemglass

    General purpose single bank vacuum manifold with 3, 4, or 5 ports. Main tube is 38mm OD with a serrated hose connection, having the smallest serration 13.5mm and the largest serration 15.5mm, located at either the left or right side for vacuum connection. Ports are either 0-4mm or 0-8mm…

  • Reusable Filter Holders with Receiver

    Thermo Scientific Nalgene

    …diameter membrane filters Eliminates the need for a manifold and/or breakable glass vacuum flask Particularly useful for field work Receiver is graduated Non-sterile Autoclavable Two side-arms allow connection to vacuum line; also accepts syringe filters. Tubing adapter can be…

  • Aluminum Vacuum Manifolds

    Dun-Rite Machining

    …Designed to be used in the vacuum filtration of liquids for analysis of microbiological or particulate contamination. Manifold accommodates both 25 and 47 mm filter funnels. Increase laboratory productivity by processing multiple samples simultaneously. Aluminum manifold is especially suited for…

  • …the manifold is used under closed conditions and must be vented to the atmosphere without breaking the vacuum connection. The 3-way valve vent is female luer slip and accepts a disposable syringe filter(13JP020AN) or KS13 holder with PTFE filter(J020A013A) to maintain sterility. The manifold outlet…

  • Filter Holders

    Sartorius

    Accessories for Combisart and Microsart Combi.jet Vacuum Manifolds

  • Double Vacuum Manifold

    Wilmad-LabGlass - SP Scienceware

    This borosilicate glass Air-Tite vacuum gas manifold (Schlenk line) is designed with double oblique pressure/vacuum stopcocks with 4mm bores and a 16.2/56 plug size. The stopcocks simplify evacuation or pressurization with an inert atmosphere. Manifold is 1" O.D.

  • With a serrated hose connection (10mm O.D.) at left or right hand side. Main tube is 22mm O.D. and the distance between valves is 100mm center to center.

  • …Separate waste container prevents tank contamination Use vacuum manifolds for SPE sample preparation, filtration, and elution. Manifolds come complete with everything you need—tank, lid, needles, stopcocks, rack, vacuum gauge, waste collection container, and plates for accepting different…

  • General purpose single bank vacuum manifold with 4 or 6 ports. Main tube is 1" OD with a serrated hose connection, having the smallest serration 13.5mm and the largest serration 15.5mm, located at either the left or right side for vacuum connection. Ports are 4mm PTFE stopcocks with serrated…

  • With 4mm double oblique, high vacuum solid glass stopcocks precision ground with corresponding numbers on barrel and plug. Solid glass stopcocks have constant pressure retention devices. Distance between stopcocks is 75mm center to center.

  • Biosart 100 Monitors: Sterile, ready to use disposable funnels designed to be placed directly onto a vacuum manifold, eliminating the cleaning and sterilization required of reusable funnels. Each monitor includes a membrane filter and cellulose pad into the funnel unit. After filtration, the 100 ml…

  • Similar to the CG-4440 vacuum manifold, but with BOTH ENDS OF INERT GAS LINE OPEN to permit connection to the gas source and an oil bubbler. Hose connections have a 10mm small serration and a 11mm large serration.

  • …cover allow user to easily rest cover on work surface when removed from the manifold Screw-type solvent-resistant vacuum bleed gauge and valve offer better sealing and vacuum control. Valve takes 1/4″ vacuum tubing. PP collection vessel rack accommodates autosampler vials; small…

  • Manifold, Vacuum

    Ace Glass

    All-glass-and-PTFE vacuum manifold with three, four or five stopcock ports. Each port is a variable opening, 0-10mm, high vacuum threaded stopcock. Plugs are PTFE with Nylon or PTFE handles and FETFE O-Rings. Ultimate vacuum of 10-7 can be realized with O-Rings as supplied. For bakable systems,…

  • Double bank manifold available in 3, 4 or 5 port configuration. Forward facing 0-8mm Chem-Vac™ Chem-Cap® valves permit easy operation of manifold inside of a fume hood. Main ports are spaced 100mm center to center with an additional 2 ports on the upper bank that can be used for gauging or…

  • …AND AF-0455 ADAPTERS MUST BE PURCHASED SEPARATELY. All four ends of the manifold have #15 o-ring joints permitting the trap assembly to be attached to either the right or left side of the vacuum bank. Manifold is supplied with two AF-0210-01 #15 stoppers and three AF-0070-05 #15 o-ring joint…

  • Stainless Steel Vacuum Manifolds

    GVS Filter Technology

    Vacuum manifold used for filtration and analysis of liquid samples Stainless steel filter funnel manifold, for use with microbiology monitors, analytical funnels and general filtration. Features and Benefits Durable Stainless Steel construction for easy cleanup and…

  • General purpose double bank vacuum manifold with 3, 4, or 5 ports for use with vacuum and inert gas. Both tubes are 1/2” OD with serrated hose connections located on the upper left and lower right banks. Ports are 4mm high vacuum stopcocks with serrated hose connections. Ports are spaced 85mm…

  • Microsart 1, 2, 3, & 6-branch manifold for Microsart filtration units and funnels Equipment for the filtration of liquid samples in the microbiological quality control by vacuum; with Microsart base support for the use of Microsart Funnels or Microsart@filter, with venting filter and…

  • Microsart 1, 3 & 6-branch manifold for Biosart 250 Funnels Equipment for the filtration of liquid samples in the microbiological quality control by vacuum; with Combisart base support for the use with Biosart 250 Funnels, with silicone tubing Pack size 1

  • Microsart 1, 3 & 6-branch manifold with 100ml Stainless Steel Funnel Equipment for the filtration of liquid samples in the microbiological quality control by vacuum; with base support for 47 and 50mm filter and 100ml stainless steel funnel, with silicone tubing pack size 1

  • Vacuum Manifold

    Cannon Instrument

    With three or four manual valves for applying vacuum or pressure to capillary-type viscometers Designed for use with 9726T20 through 9726T67 Vacuum Regulators and Cannon-Manning, Asphalt Institute or Modified Koppers vacuum viscometers (see Thomas number 9724H50) Integral brackets permit…

  • …control of vacuum and inert gases. Distance between stopcocks is 65 mm for 8651N01 and 100 mm for 8651N03. Include patented pressure/vacuum retainers. Dimensions (mm): 8651N01: 230 L x 87 H x 90 D; 8651N03: 500 L x 87 H x 90 D. Thomas No. 1177B35 Glass double oblique manifold replacement…

  • …Graduated Funnels: 300mL, 500mL, 800mL Autoclavable Advantec’s Polysulfone 47mm Filter Holders are an economical alternative to glass vacuum holders. The durable polysulfone plastic construction is chemically resistant and can withstand mishandling. The recessed polypropylene filter…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.