Vacuum Grease

Compare Tool

Select up to 3 products

Vacuum Grease
1 - 32 of 83
Sort
View
Show


  • Dow Corning High Vacuum Grease

    Ellsworth Adhesives

    Translucent silicone lubricant with high film strength, especially developed for making effective seals in vacuum systems operating at pressures less than 10 -6 mm Hg (10 -4 kPa) Inert, non-toxic, insoluble in water and resistant to most acids, alkalies and other corrosive chemicals …

  • …properties; for contamination-free use and better vacuums Silicone-free- no migration or contamination Excellent lubrication Easy application and cleaning Stable, chemically inert and non-toxic; fully compatible with most modern vacuum components APIEZON H Wide temperature range usable…

  • SIAL Vacuum grease

    MilliporeSigma

    Synonym(s): Grease for vacuum lines; Stopcock grease

  • …used with confidence in extreme environments, ultra high vacuum conditions and in the presence of gaseous and liquid oxygen at elevated temperatures. The branched perfluoropolyether base oil and PTFE thickener facilitate the grease’s excellent lubricity and chemical inertness across its…

  • HIGH VACUUM GREASE

    Agilent Technologies

  • High Vacuum Grease, 4oz

    Fischer Technical

  • High Vacuum Grease, 4oz.

    Fischer Technical

  • …and prevents contamination of adjacent surfaces Including corrosion of small metal fastenings. Anti-Seize Vacuum Grease Non-hazardous Solvent resistant General purpose vacuum grease for vapor pressure of -5 mm Hg at 20°C. Melting point >200°C. Working temperature range -40 to +180°C.…

  • MDL Number: MFCD00148382

  • MDL Number: MFCD00148382

  • Synonym(s): Baysilone ® ; Schlifffett Legal Information: Baysilone is a registered trademark of Bayer AG

  • MDL Number: MFCD00148382

  • Synonym(s): Baysilone ® ; Schlifffett MDL Number: MFCD00148382

  • GREASE, HIGH VACUUM, 25g TUBE

    Agilent Technologies

  • Seals and prevents freezing of stopcocks and ground-glass joints in high-vacuum systems at pressures less than 10-6 mm Hg. Heat stable (-40 to 260 C), low vapor pressure, and chemically resistant. Colorless. 5.3 oz. tube. Legal Information: Dow Corning is a registered trademark of The Dow…

  • …but for preventing the freezing of stopcocks, ground joints, etc., which are stored for long periods of time; also recommended for use in high vacuum systems Lubriseal has a low vapor pressure and resists attack by acidic and alkaline solutions Lubriseal is smooth-textured, stable, free…

  • Apiezon® grease

    MilliporeSigma

    For low vapor pressure sealing and lubrication in high vacuum applications. Legal Information: Apiezon is a registered trademark of M & I Materials Ltd.

  • For HYVAC vacuum pumps and systems

  • Similiar to Krytox 240 AC, except used as high-vacuum grease. 2 oz. tube. R: 36/37/38 S: 26-36 Legal Information: Krytox is a registered trademark of E. I. du Pont de Nemours and Company

  • Desiccators, Vacuum

    United Scientific Supplies

    …any greasing. The PP stopcock has a self lubricating PTFE plug that works to create the vacuum, shut it off and release it. Autoclavable at 120°C for fifteen minutes. Non-vacuum desiccators are physically the same as vacuum desiccators; only difference is the absence of stopcock. Grease should…

  • Schlenk Vacuum Sample Tubes

    SP Wilmad-LabGlass

    These borosilicate glass Schlenk sample tubes incorporate a grease-free high vacuum 0-4mm valve and are suited for pressure/vacuum applications. Ideal for reaction and storage of air-sensitive compounds. Sidearm can be connected to inert atmosphere/vacuum source or a manifold.

  • Similar to CG-4515 traps but having an o-ring joint to connect the trap body to the stopper. O-ring joint provides for a vacuum tight, grease free seal and permits the trap body to be easily disconnected from the stopper for cleaning. Serrated hose connections are 13.5mm at the smallest serration…

  • Laboratory High Vacuum Pump

    Fischer Technical

    …oil becomes milky or cloudy. High Vacuum Grease This vacuum grease helps provide a proper seal between the vacuum pump plate and the bell jar so that high vacuum pressures can be achieved. "The Tank" Oil Change System All vacuum pumps require changing oil after every…

  • Vacuum Tubing The Fischer Technical High Vacuum Tubing has an ID of 1/2" and can withstand 25 microns of pressure. High Vacuum Pump Oil Fischer Technical High Vacuum Pump Oil is available by the quart in packs of two or cases of twelve. High Vacuum Grease This vacuum grease

  • …substances. Compatible with any common desiccant. Porcelain plate, ground glass flanges. Rated to 9.6 PSI vacuum when properly cleaned and greased. Available from 100mm (XS) to 300mm (XL). Also available in Light-Blocking Amber. In collaboration with Borosil…

  • …items.  These high strength desiccators will hold a full vacuum (29” Hg, 737 mm) at room temperature for 24 hours and remain airtight even if not under vacuum. The included gasket, with an application of vacuum grease assures a tight seal down to 0°C. The polypropylene stopcock…

  • …finger tube positions in center neck and is held by a plastic bushing to a threaded condenser flask. All joints are PTFE-Clad to eliminate the use of grease and still avoid freezing. Kettle flange has a groove for a CAPFE O-Ring. Quick Release clamp secures head & kettle. Complete consists of Kettle…

  • Abdos Vacuum Desiccator

    Foxx Life Sciences

    Vacuum desiccators are molded with high-quality plastics which are light and easy to handle. Silicone O-ring assures tight seal down to 0°C without using grease. Bottom part of the desiccators comes with thick perforated polypropylene disc with big holes in the middle for easy lifting. …

  • Abdos Vacuum Desiccator PC/PC

    Foxx Life Sciences

    These All Clear Polycarbonate (PC) Vacuum desiccators are molded with high-quality plastics which are light and easy to handle. Silicone O-ring assures tight seal down to 0°C without using grease. Bottom part of the desiccators comes with thick perforated polypropylene disc with big holes in the…

  • …unground joints or temporary additions to vacuum systems. Vapor pressure 1 x 10 -4 mm Hg. Softening point: 45°C. Site of application should remain between -10 and +30°C. For the rigid permanent or semi-permanent sealing of joints in high vacuum systems down to 4.5 x 10 -9 mm Hg @…

  • Two-piece vacuum trap with #15 o-ring joints on both the inlet and outlet ports. The seal between the trap stopper and body is made with a 57mm flat o-ring flange for total grease-free operation when used with either the AF-0060 or AF-0061 manifolds. Trap body is 57mm OD x 300mm in length to be used…

  • Best for use with applications involving solvents or solvents outgassing. Resistant to: many hydrocarbons, fats, oils, greases, hydraulic fluids, chemicals. Attacked by: ozone (except PVC blends), ketones, esters, aldehydes, chlorinated and nitro hydrocarbons. Formerly Part# 100049.

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.