Vacuum Flask

For use in vacuum filtration applications Withstands full vacuum (to 30” Hg) With hose barb for 1/4” I.D. tubing

… 45mm neck size The Denville 250ml, 500ml and 1000ml Vacuum Filtration Flasks are ideal for separation and purification of your samples. Membrane material includes PES and PVDF in .22µm and .45µm. Our flasks have a wide bottle opening for easy access and pouring of your…

…water source or vacuum aspirator. It is more economical than an electric vacuum pump. The pumping rate is 15ml per stroke and will displace up to 725ml of air. The pump is fitted with a valve to release the vacuum. Includes: 1 Borosilicate Filtering Flask, 500ml 1 Vacuum Pump 1 Buchner…

These flasks, also called vacuum flasks, have a side-arm with a 45° downward angle to prevent tipping.   Reduce broken glassware with this flask constructed of FDA grade polypropylene Side Arm accepts flexible tubing from 3/8" to 1/2" I.D. 1000 ml capacity

…most advanced vacuum trap system. Ideal for protection of vacuum lines and scientists alike, Vactrap safely contains waste from supernatant removal, chemical separation, and cell or tissue culture media aspiration. Best of all, Vactrap comes ready to use--simply attach to your vacuum and begin your…

…Top Vacuum Filters offer a revolutionary approach to bulk solvent filtration. Safer, faster, and easier to use than conventional glass filtration assemblies, labForce’s Solvent Filtration funnels screw onto any vacuum-capable GL45 threaded bottle. Simply plug the filter onto your vacuum line,…

…and sturdy construction, this 10L bottle/flask is perfect for filtering large volumes of liquid. The thick walls and design enables this flask to withstand vacuum filtration without imploding. Graduated in 1000mL increments on a scale from 2000mL to 8000mL with an accuracy of +/- 5%. Neck size fits…

Designed for use with 1L and 4L vacuum filtering flasks and 47mm vacuum filter holder assemblies 100% Silicone Material Perforated, 1-hole accepts filter holder assemblies and tubing Pack of 5

…filters with glass support, NS 40/35 joints, 4 L flask (included) Funnel volume is 1000 mL General description Same as Z290432 but with NS 40/35 jont (male on flask, female on funnel support) instead of rubber stopper. Vacuum filtration apparatus for HPLC solvent purification,…

The economical and silent vacuum source The chemically resistant PTFE diaphragm vacuum pump impresses with its very silent and economical operation. With a flow rate of 1.8 m 3 /h and an ultimate vacuum of 5 mbar, it is optimally suited to be combined with the Rotavapor® R-300. Your…

…higher flow rate. Available in four graduated funnel capacities 100, 300, 500, or 1000 mL. The No.8 silicone stopper mounts in a standard 1L vacuum filter flask or manifold cup. The optional 2" glass extention allows for physical separation of the 47mm filters set up in series. Samples can…

…while the attached trap protects the vacuum source from accidental fluid backflow. A flexible collection tube reaches from the bottle and accepts disposable 1 mL pipet tips, glass Pasteur or 2 mL pipets for work with Petri dishes, microtiter plates, flasks and centrifugal tubes. The small footprint…

…using vacuum filtration. Included is a 500ml Borosilicate Filtering Flask, Vacuum Pump, Porcelain Buchner Funnell, 9cm filter paper, connection tubing, and a rubber stopper. The stopper hole is specially cut to hold the Buchner funnel. The Vacuum Pump is simplifies the process of vacuum filtration,…

…integrated system where a central interface regulates each component. Your most important benefits: Convenient Comfortable flask and vapor duct removal thanks to easy to use Combi-Clip User-friendly operation due to ergonomic electric or manual lift Immediate adjustment…

WT 100 Witt's Flask, 1000 ml with tubing nozzle, vacuum filtration apparatus accessories, for filtrate collection in an inserted container. WT 100 Witt's Flask, 1000 ml with tubing nozzle, vacuum filtration apparatus accessories, for filtrate collection in an inserted container. The bottle is made…

…for larger evaporation flasks up to 10L or small vacuum oven applications generating chemically aggressive vapors. Models 2037 & 2047 are high flow DryFast models for lab vacuum applications requiring chemical resistance – vacuum manifold filtration, vacuum ovens, and laboratory…

Micro Filtering Flasks These PYREX® VISTA™ micro filtering flasks are recommended for microchemical use. The vacuum hose is attached to the flask's sidearm. A funnel is inserted into the neck of the flask through a ground joint or rubber stopper. The applied vacuum facilitates the…

…aspirate and collect fluids using a vacuum source Holds 3200ml (108oz) and the included trap prevents fluid flow into the vacuum source Use to aspirate media, waste chemicals, cell washing solutions, and more Ideal for use with dishes, plates, flasks and tubes All parts, except the…

The Gas Generating Bottle is useful in the production of gasses and provides a funnel tube and a connecting tube. Includes a 500ml capacity Bottle, 2-hole Rubber Stopper, Thistle Tube and a 90 degree angle connector tube.

…borosilicate glass withstands extreme temperatures and high vacuum. Tops feature a wide mouth opening to load fast and clean easily. Flat bottoms reduce spills and provide better balance. Lyph-Lock Seals hold top and bottom of Lyph-Lock Flasks together during pre-freezing and lyophilization.…

… Replacement borosilicate glass bottom withstands extreme temperatures and high vacuum Fast-Freeze Flasks attach with adapters to valve ports on Labconco Drying Chambers and Manifolds Fast-Freeze Flasks and Adapters are compatible with any brand freeze dryer that has 1/2" or 3/4"…

…caps (no membrane) and vented caps (with breathable membrane) are available Clear lot number for batch traceability Non-Pyrogenic, DNase/RNase-FREE Denville® cell culture flasks have an even surface, and Vacuum Plasma tissue culture treatment ensures maximum, uniform cell growth.

…with condensate trap and non-return valve with attachment for Rotavapor (not necessary with V-700/710 in stand-alone systems). 1229D82 - Buchi RC-81 remote control can be used to control the vacuum controller and the Rotavapor: rotation, starting/stopping and raising/lowering of the flask.

Vacuum trap system protects gauge heads, like our 14034, and pumps from corrosive vapors and particle fouling. System consists of a Dewar flask, cold trap and inlet arm. High-vacuum stopcocks are used throughout. Gauge & inlet arm are Ace-Thred connections. Pump & manifold connections are o-ring…

…from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements A second flask should be connected between the filtering flask and the vacuum source to prevent accidental entry of the filtrate into the vacuum line or pump.

SYNTHWARE round bottom single neck reaction flask with a standard taper outer joint and a high vacuum valve sidearm. Useful for sample storage or simple reactions. Valve plug may be removed to sample from the flask while an inert gas purge is passed through the sidearm.

The aspirator with trap flask FTA-1 with a 1L trap flask is designed for the aspiration or removal of any remaining alcohol or buffer from microtest tube walls during DNA / RNA purification and other macromolecule re-precipitation techniques. An ideal personal tool for independent operation…

…under vacuum, effectively reducing the boiling point of the solvents and removing the vapor phase, making the process much more efficient. Each unit is also equipped with an easy-to-use vacuum release and a continuous feed system, which allows solvent to be constantly drawn into the rotating flask…

SYNTHWARE storage flask with high vacuum valve and side arm. Valve has a PTFE o-ring at the tip and PTFE wiper to protect the Viton o-ring on the shaft.

…80 mm; especially useful when using varying capacity evaporating flasks or when there is a need to shift the vacuum seal’s contact position (Patent No. 3220033) Evaporation flasks are easily removable with built in flask remover Designed with a motorized lift making it easy to raise…

Microscale, vacuum adapter with vertically adjustable Hirsch filter funnel that is suitable for use with all Microscale flasks and vials with 14/10 joints. Two-piece adapter features a #7 Ace-Thred at top with a Nylon bushing and O-Ring that forms a compression seal with funnel stem, bottom joint,…

Vacuum Pump V-700/710 compact high performance condensers for producing maximum condensation of residual solvent vapor after the pump. At the same time it separates any liquid solvent from the pump, putting it directly into the receiving flask. Insulation sleeves prevent the formation of undesirable…