Vacuum Filter Tubing

Compare Tool

Select up to 3 products

Vacuum Filter Tubing
1 - 32 of 114
Sort
View
Show

Pall

  • 2 Vacuum Tubing Adapters for 300- & 310- series Reusable Filter Holders

  • Adapter kit for Reusable Filter Holders Consists of 8 vacuum caps and a tubing adapter

  • SV 006 Vacuum Tubing, 1 meter length, vacuum filtration apparatus accessories SV 006 Vacuum Tubing, 1 meter length, vacuum filtration apparatus accessories

  • For use in vacuum filtration applications Withstands full vacuum (to 30” Hg) With hose barb for 1/4” I.D. tubing

  • Filter units contain either a 47, 60 or 90 mm diameter filter membrane integrally sealed to a support grid designed to maximize flow and reduce foaming and protein denaturation. The filter funnels, dust covers and receiver/storage bottles are manufactured from polystyrene. Tubing adapter, filter

  • 47mm Filter Graduated Funnels: 300mL, 500mL, 800mL Autoclavable Advantec’s Polysulfone 47mm Filter Holders are an economical alternative to glass vacuum holders. The durable polysulfone plastic construction is chemically resistant and can withstand mishandling. The recessed…

  • Vactrap™2 Round Tubing

    Foxx Life Sciences

    …Vactrap2™ system includes two Foxx Heavy Duty Vacuum Bottles (autoclavable PP or chemically-resistant HDPE), each with a patented VersaCap® closure for tangle-free opening, no need to disconnect Tubing, ever. A 0.2µm PTFE inline vent filter retains any aerosolized bacteria, and…

  • P-Vac Portable Vacuum System

    Argos Technologies

    …where an inline vacuum source is not available, outside of the laboratory setting where a vacuum is required, or when the sample being aspirated is too dangerous for the house vacuum. The P-Vac system is supplied with a .45um hydrophobic vacuum filter, silicone connection tubing, HandE-Vac hand…

  • Tygon® S3™ E-3603 Laboratory Tubing

    DWK Life Sciences (Kimble)

    This tubing is used for drain, vent, and general laboratory applications, and is specially formulated for resistance to flex-fatigue and abrasion. It has heavy walls to withstand a full vacuum, and may be used on a variety of glassware including filter flasks, condensers, and distillation adapters. …

  • Filtration Vacuum Pump Kit

    GSC International, Inc.

    …electric vacuum pump. The pumping rate is 15ml per stroke and will displace up to 725ml of air. The pump is fitted with a valve to release the vacuum. Includes: 1 Borosilicate Filtering Flask, 500ml 1 Vacuum Pump 1 Buchner Funnel 9cm Filter Paper Connection Tubing Rubber Stopper…

  • Vacuum Pick Up System

    Electron Microscopy Sciences

    …includes: Vacuum Pick-up System complete set: Vacuum Generator, Aluminum Vacuum Pen, Five Vacuum Tips, Set of seven Rubber Vacuum Cups (size ranging: 9/16", ½", 7/16", 3/8", 5/16", 1/4" and 3/16"), an In-line Filter, and 4 ft (122cm) of Vacuum Tubing.

  • Stainless Steel Vacuum Manifold

    Thermo Scientific Nalgene

    Nalgene 345 Solid and stable on the bench top Designed with three vacuum outlets, each with leakproof, two-way valve and vent port Each outlet securely holds a No. 8 stopper and the stem filter funnel without interference Autoclavable Easy manipulation of individual funnels…

  • Vactrap™ Vacuum Trap System

    Foxx Life Sciences

    …includes two shatterproof Foxx Heavy Duty Vacuum Bottles (autoclavable PP or chemically-resistant HDPE), each with a patented VersaCap closure for tangle-free opening --no need to disconnect tubing, ever. A 0.2µm PTFE Inline Vent Filter retains any aerosolized bacteria, and the…

  • EZ-Vac™ Vacuum Manifold

    Zymo Research Corporation

    …and is capable of processing up to 20 samples simultaneously using vacuum pressure. The vacuum manifold allows researchers to simplify their nucleic acid purification workflows further by eliminating the need for multiple centrifugation steps and disposal of flow-through from collection tubes.

  • …bottle features heavy wall construction and a safety release vent to prevent vacuum implosion Replaceable hydrophobic filter protects the pump motor from fluid contamination Collection bottle, lid, tubing and connectors are all autoclavable at 121°C; all held within a polypropylene…

  • …pumping module Vacuum or pressure pump Cooling provided by forced-air blower Gas ballast minimizes condensation of exhaust vapors, purges pump oil. Quick disconnect inlet is 5/8”; requires 1/2” bore tubing. Replaceable internal oil filter removes foreign particles;…

  • EZ-Stream Vacuum Pump

    MilliporeSigma

    …apparatus and place the discard tubing to drain and you are ready to filter. There is no need to use additional containers to capture the waste liquid. This brings a significant time saving versus traditional vacuum/pressure pumps or in-house vacuum because the following steps are eliminated:…

  • …breaking the vacuum connection. The 3-way valve vent is female luer slip and accepts a disposable syringe filter(13JP020AN) or KS13 holder with PTFE filter(J020A013A) to maintain sterility. The manifold outlet is 1/4"male to hose barb fitting and connects to 3/8" id tubing. Autoclavable.…

  • SPE Vacuum Pump Trap Kit

    MilliporeSigma

    …and the vacuum source, a Supelco SPE Vacuum Pump Trap collects all liquids that are aspirated through the SPE tubes, preventing contamination of the vacuum pump. The easily assembled kit contains a polypropylene filtering flask, a one-hole rubber stopper, 4 in. (10 cm) of polypropylene tubing and 5…

  • …multi-channel pipettors facilitates a manual liquid transfer. Extraction is carried our using the CHROMABOND® MULTI 96 vacuum manifold. With the help of the control valve the vacuum of the manifold can be adjusted leading to an optimum flow rate through the CHROMABOND® MULTI 96 SPE plate. …

  • vacuum and begin your work. The full VactrapXL™ system includes two Foxx Heavy Duty Vacuum Bottles (autoclavable PP or chemically-resistant HDPE), each with a patented VersaCap® closure for tangle-free opening, no need to disconnect tubing, ever. A 0.2µm PTFE inline vent filter

  • vacuum pressures can be achieved. High Vacuum Inline Filter The inline air filter features 24 square inches of filter media which remains strong up to 10cfm air flow.  Removes particales as small as 5 microns.  For use with 1/2" diameter vacuum tubing 1/2" Tubing

  • …screen AS300/3 Multiple Vacuum Filtration Apparatus, three-place vacuum filtration system, stainless steel 500 ml, 47/50 mm, support screen The apparatus can be autoclaved and sterilized by dry heat at up to 180°C. Suitable only for vacuum operation. If flushing tubes are used, do not exceed 1.3…

  • …AS600/3 Multiple Vacuum Filtration Apparatus, six-place vacuum filtration system, stainless steel 500 ml, 47/50 mm, with support screen AS 600 Series The apparatus can be autoclaved and sterilized by dry heat at up to 180°C. Suitable only for vacuum operation. If flushing tubes are used, do not…

  • Filter Holders

    Sartorius

    Accessories for Combisart and Microsart Combi.jet Vacuum Manifolds

  • …adaptor, bottle adaptor nut, filter inlet cap, grid support, vacuum hose barb, tube compression fitting, 47 mm grid, 47 mm 0.22 µm filter membrane, 47 mm 0.45 µm filter membrane, 1/4" OD x 1/8" ID ultra chemical resistant, FEP-lined Tygon tubing (3'), 6" x 6" box…

  • Returns oil from exhaust filter housing to pump. Needed when pump is run with the gas ballast open for extended periods of time. Includes: One (1) oil return assembly One (1) drain adaptor One (1) restrictor One (1) flexible oil-return tube Two (2) hose clips One (1)…

  • Autofil® Centrifuge Tube Stand

    Foxx Life Sciences

    Foxx Life Sciences' Centrifuge Tube Stands are intended for use with centrifuge tubes. They are made from Class VI, FDA Grade, BPA-Free Polystyrene, and are conveniently sold in packs of 5. Autofil tube stand can hold one 15ml or 50ml tube Can also be used with the Autofil Centrifuge…

  • Reusable Filter Holders with Receiver

    Thermo Scientific Nalgene

    …diameter membrane filters Eliminates the need for a manifold and/or breakable glass vacuum flask Particularly useful for field work Receiver is graduated Non-sterile Autoclavable Two side-arms allow connection to vacuum line; also accepts syringe filters. Tubing adapter can be…

  • Schlenk filter tube with an integral glass filter disc at the tube's mid-line and featuring inner joints at top and bottom.

  • …end to provide support and a vacuum seal. Lower joint is a 24/40 inner, and the hose connection has an O.D. of 8.5mm at the middle serration. Complete unit comes with an NMR tube washer and 250mL heavy wall filter flask. NOTE: FOR USE WITH 5mm O.D. x 7in TUBES ONLY. **Designed and developed…

  • Similar to AF-0544, but with the addition of two side arms, 2mm high vacuum glass stopcocks having a S.S. constant pressure retaining devices.

Compare Tool

Select up to 3 products