Vacuum Filter Manifold

Compare Tool

Select up to 3 products

Vacuum Filter Manifold
1 - 32 of 71
Sort
View
Show
  • 47mm Glass Vacuum Holder, PTFE Seal

    Advantec MFS

    …will not be shed into the filtrate. The PTFE support can filter acidic solutions at a higher flow rate. Available with a 300mL graduated funnel. The No.8 silicone stopper mounts in a standard 1L vacuum filter flask or manifold cup. Unit includes: Funnel, Flange(not included w/ sintered…

  • 3 Gallon Stainless Steel Vacuum Chamber

    Best Value Vacs

    …plated air manifold     - Vacuum release valve and vacuum connect valve (1) 1/4 Female flare universal pump adapter for vacuum hose (1) 5ft clear steel reinforced vacuum hose (1) 8"x8" Platinum cured silicone non stick VacPad® (1) 50 Micron air filter

  • Minifold I System

    GE Healthcare

    …complete 96 well (acrylic) Minifold I System Superior 96-well manifold for proteins and nucleic acid spot-blot array system. The Minifold I System consists of four basic components: sample well plate, filter support plate, vacuum plenum, and metal clamping plate. The sample well plate is…

  • Whatman MBS I Plastic Funnel

    GE Healthcare

    …time is reduced to a minimum. The design of the system, which consists of an electrical membrane dispenser, a funnel dispenser, and a vacuum manifold, leads to more reproducible results. The special sealing technique ensures easy handling and high integrity of the funnel and membrane during…

  • 47mm Stainless Steel Vacuum Holder

    Advantec MFS

    …screen(w/ PTFE gasket) ensures particles will not be shed into the filtrate. The No.8 silicone stopper mounts in a standard 1L vacuum filter flask or manifold cup. Unit includes: Funnel, Base, Support, Gasket, Stopper Please Note: ALL Advantec items have a maximum 48 hour cancellation…

  • Whatman AS220 Two-Place Vacuum Filtration Manifold for MBS I

    GE Healthcare

    AS220 Two-place vacuum filtration manifold for MBS I AS220 Two-place vacuum filtration manifold for MBS I

  • Stainless Steel Vacuum Manifold

    Advantec MFS

    manifold can accomodate 90mm holders. Use 47mm or smaller holder units on the 6-place model. Valves have a PTFE stopcock. Available with 2-way or 3-way valves. Use the 3-way valve when the manifold is used under closed conditions and must be vented to the atmosphere without breaking the vacuum

  • 47mm Glass Vacuum Holder Assemblies

    Advantec MFS

    filter acidic solutions at a higher flow rate. Available in four graduated funnel capacities 100, 300, 500, or 1000 mL. The No.8 silicone stopper mounts in a standard 1L vacuum filter flask or manifold cup. The optional 2" glass extention allows for physical separation of the 47mm filters

  • 47mm Sterility Test Filter Holder

    Advantec MFS

    …cover, KS13 filter holder with injector needle, PTFE stopcock, and 1/4"ID silicone tubing(21"L). The anodized aluminum clamp secures the membrane between the funnel and sintered glass frit base. The No.8 silicone stopper mounts in a standard 1L vacuum filter flask or manifold cup. …

  • Whatman PFTE Membrane Filters, TE Range

    GE Healthcare

    …sterilization make use of the hydrophobic characteristics of PTFE membrane filters and their ability to stop aqueous aerosols. Pore sizes of 0.2 µm and 0.5 µm are typically used. Sterile venting of vacuum manifolds, fermentation vessels, and filtrate tanks and containers utilize PTFE 0.2…

  • Microfil Filtration System

    MilliporeSigma

    …tightly seal to manifold supports without clamps or O-rings assuring leak-free operation and uniform microorganism recoveries Novel device lifts mem/pane after filtration, for easy removal with forceps Unique Microfil support filters faster than all-glass filter apparatus Select…

  • Whatman Filtration Manifolds

    GE Healthcare

    Stainless steel filter funnel three-place manifold, for microbiology monitors and analytical funnels Stainless steel filter funnel three-place manifold, for microbiology monitors and analytical funnels AS 300 and 600 Series The stainless steel manifold for three or six filtration units is fitted…

  • Sterility Test Manifold and Holders

    MilliporeSigma

    3- and 6-place manifolds for sterility testing Stainless steel body, valves and filter supports

  • Stainless Steel Extraction Manifold

    Advantec MFS

    …the manifold is used under closed conditions and must be vented to the atmosphere without breaking the vacuum connection. The 3-way valve vent is female luer slip and accepts a disposable syringe filter(13JP020AN) or KS13 holder with PTFE filter(J020A013A) to maintain sterility. The manifold outlet…

  • PVC Extraction Manifold

    Advantec MFS

    …allows the manifold to be vented to atmosphere when used under closed conditions without breaking the vacuum connection. The valves luer slip vent port accepts a disposable syringe filter (13JP020AN) or KS13 holder with PTFE filter (J020A013A) to maintain sterility. The manifold outlet is…

  • Vacuum Manifolds

    Porvair

    …universal robotic manifold can operate with many different brands of filter plates and collection trays.  Supplied with integral vacuum gauge, the manifold provides complete control of vacuum pressure ensuring plates are processed with high reproducibility.  The manifold is fully…

  • Filter Funnel, Threaded

    Thermo Scientific Nalgene

    … Screw-type closure holds membrane in place Autoclavable Can be used with any filtering flask or manifold that accepts a suitable rubber stopper with hole. Includes one easy-to-use, no-twist Nalgene® vacuum gasket, which can replace a No. 7 or 8 rubber stopper with a 9/16” (15 mm) hole.

  • PTFE Membrane Circles

    GE Healthcare

    …characteristics of PTFE membranes and their ability to stop aqueous aerosols. Usual pore sizes are 0.2 µm and 0.5 µm. Sterile venting of vacuum manifolds, fermentation vessels, and sterile filtrate tanks and containers utilize PTFE 0.2 µm membranes. WTP and TE membrane ranges WTP membranes…

  • Filter Holder Manifolds

    MilliporeSigma

    …outlets. Manifolds connect to single vacuum source and use separate control valves at each station for independent operation. Use vent ports on each stainless manifold station to attach Swinnex filter holders or Millex filter units to maintain sterility on test filter's downstream side.

  • EZ-Stream Vacuum Pump

    MilliporeSigma

    …pump to your manifold or filtration apparatus and place the discard tubing to drain and you are ready to filter. There is no need to use additional containers to capture the waste liquid. This brings a significant time saving versus traditional vacuum/pressure pumps or in-house vacuum because the…

  • Sterility Test Manifold

    Advantec MFS

    …allows the manifold to be vented to atmosphere when used under closed conditions without breaking the vacuum connection. The valve vent is female luer slip and accepts a disposable syringe filter(13JP020AN) or KS13 holder with PTFE filter(J020A013A) to maintain sterility. The main manifold outlet is…

  • Filter Holders

    Sartorius

    Accessories for Combisart and Microsart Combi.jet Vacuum Manifolds

  • 1 Gallon Tall Stainless Steel Chamber

    Best Value Vacs

    …plated air manifold     - Vacuum release valve and vacuum connect valve (1) 1/4 Female flare universal pump adapter for vacuum hose (1) 5ft clear steel reinforced vacuum hose (1) 8"x8" Platinum cured silicone non stick VacPad® (1) 50 Micron air filter

  • Polysulfone Vacuum Filter Holders

    Advantec MFS

    47mm Filter Graduated Funnels: 300mL, 500mL, 800mL Autoclavable Advantec’s Polysulfone 47mm Filter Holders are an economical alternative to glass vacuum holders. The durable polysulfone plastic construction is chemically resistant and can withstand mishandling. The recessed…

  • Vacuum Manifolds

    Sartorius

    Accessories for Combisart and Microsart Combi.jet Vacuum Manifolds. Stainless Steel Filter Holders Stainless steel holders differ in their funnel capacity (choice of 40 ml, 100 ml or 500 ml) and in their valve type (part numbers ending with CS feature sterile venting). They are…

  • Filter Funnel Manifolds for MicroFunnel™ Filter Funnels

    Pall Life Sciences

    Perfect Fit Vacuum Manifolds for Use with the MicroFunnel Filter Funnel No adapters or rubber stoppers required to hold the filter funnel in place Works with all Pall Life Sciences MicroFunnel filter funnels, including the 100mL and 300mL sizes Durable aluminum and stainless steel…

  • 90mm Glass Vacuum Holder Assemblies

    Advantec MFS

    Filter larger volumes of liquid  Filter viscous, heavy particle or biobuden samples Sintered glass or Stainless steel support Borosilicate glass filter holder assemblies for the microanalysis of liquids for biological or particulate contamination under vacuum. The 90mm holder…

  • Standard Duty Dry Vacuum Pump

    Welch

    filtering and SPE. Select low flow model for 1-2 filter funnels; higher flow model for up to 6 filter funnels. Can also be used as pressure pumps. 2-head models – Use low vacuum / high flow for filter manifolds or lab automation; select high vacuum (e.g. 5 torr) / high flow for vacuum

  • Stainless Steel Vacuum Manifold

    Thermo Scientific Nalgene

    Nalgene 345 Solid and stable on the bench top Designed with three vacuum outlets, each with leakproof, two-way valve and vent port Each outlet securely holds a No. 8 stopper and the stem filter funnel without interference Autoclavable Easy manipulation of individual funnels…

  • Biosart 100 Monitors

    Sartorius

    …Sterile, ready to use disposable funnels designed to be placed directly onto a vacuum manifold, eliminating the cleaning and sterilization required of reusable funnels. Each monitor includes a membrane filter and cellulose pad into the funnel unit. After filtration, the 100 ml funnel is removed…

  • Vacuum Manifolds

    Sartorius

    …each manifold is equipped with a Minisart syringe filter for sterile venting of the individual filter holders. This rules out secondary contamination of the underside of the filter. Manifolds may be purchased pre-configured with stainless steel funnels or individually in order to pair with a filter

  • Vacuum Gasket for Filter Funnels

    Thermo Scientific Nalgene

    Replace #7 or #8 stoppers in any manifold or filtering flask with the Thermo Scientific™ Nalgene™ Vacuum Gasket for Filter Funnels. Permits filter funnel to slide quickly and easily in and out of gasket. These filtration products offer reliability, accuracy and safety for many research…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.