Vacuum Filter Holder

Compare Tool

Select up to 3 products

Vacuum Filter Holder
1 - 32 of 51
Sort
View
Show
  • 47mm Filter Graduated Funnels: 300mL, 500mL, 800mL Autoclavable Advantec’s Polysulfone 47mm Filter Holders are an economical alternative to glass vacuum holders. The durable polysulfone plastic construction is chemically resistant and can withstand mishandling. The recessed…

  • Vacuum Filter Holder Set, 47mm

    United Scientific Supplies

    This all-glass filter holder is used in particulate contamination analysis for filtering aqeuous, organic, or corrosive liquids. It is also recommended for HPLC solvent filtration. Complete set includes a borosilicate glass funnel, anodized aluminum spring clamp, vacuum base with sintered disc,…

  • Vacuum Filter Holder Set, 90mm

    United Scientific Supplies

    This all-glass filter holder is used in particulate contamination analysis for filtering aqeuous, organic, or corrosive liquids. It is also recommended for HPLC solvent filtration. Complete set includes a borosilicate glass funnel, anodized aluminum spring clamp, vacuum base with sintered disc,…

  • …a vacuum filter. Includes a stainless steel filter support and No. 5 perforated silicone stopper for easy attachment to a vacuum filtering flask. Membrane filters are not included. Thick prefilters or laminated filters will not seal in this holder and it is not autoclavable with membrane filters

  • …a vacuum filter. Includes a fritted glass filter support and No. 5 perforated silicone stopper for easy attachment to a vacuum filtering flask. Membrane filters are not included. Thick prefilters or laminated filters will not seal in this holder and it is not autoclavable with membrane filters

  • Vacuum Filter Holder Set, Fritted Glass

    United Scientific Supplies

    …clamp, and perforated silicone stopper. Parts are available seperately. Filter Diameter: 47mm, Filtration area is 9.6cm². Capacity: Funnel: 300ml, Flask: 1L. Outlet fitting: 6mm (1/4") O.D. tubulated cap sidearm to vacuum. Prefilter Diameter: Thick Depth Prefilter: 35mm. Membrane Prefilter:…

  • Designed for bacteriological analysis where it is necessary to sterilize the filter holder with the membrane filter in place. The glass surface is coated with PTFE to avoid filter damage and membrane adhesion during autoclaving. Complete set includes a PTFE-faced borosilicate glass funnel and…

  • …and perforated silicone stopper. Parts are also available seperately. Filter Diameter: 47mm, Filtration area is 9.6cm². Capacity: Funnel: 300ml, Flask: 1L. Outlet fitting: 6mm (1/4") O.D. tubulated cap sidearm to vacuum. Prefilter Diameter: Thick Depth Prefilter: 35mm. Membrane Prefilter:…

  • 2 Vacuum Tubing Adapters for 300- & 310- series Reusable Filter Holders

  • Adapter kit for Reusable Filter Holders Consists of 8 vacuum caps and a tubing adapter

  • Filter small volumes  3 funnel sizes available Sintered Glass or Stainless Steel support Borosilicate glass filter holder assemblies for the microanalysis of small volumes of liquids for biological or particulate contamination under vacuum. The holder utilizes a 25mm filter

  • Filter small volumes  3 funnel sizes  Concentrate samples in small area Borosilicate glass filter holder assembly for microanalysis of small volumes of liquids under vacuum. Filter biological samples or organic solvents. The holder utilizes a 25mm filter membrane yet…

  • …steel, or PTFE support Borosilicate glass filter holder assemblies for the microanalysis of liquids for biological or particulate contamination under vacuum. The 47mm holder is the standard size for microbiology and uses a 47mm filter membrane. The anodized aluminum clamp secures the…

  • Filter larger volumes of liquid  Filter viscous, heavy particle or biobuden samples Sintered glass or Stainless steel support Borosilicate glass filter holder assemblies for the microanalysis of liquids for biological or particulate contamination under vacuum. The 90mm holder

  • …Can be flame sterilized The 47mm Stainless Steel Holder for the microanalysis of liquids for biological or particulate contamination under vacuum filtration. The unbreakable 304ss unit may be flame sterilized to sanitize the holder between samples. The 500mL funnel connects to the base…

  • Filter Holders - Kit47 mm, Glass frit membrane support, 300 mL FunnelThe Millipore All-Glass Filter Holder was designed for the filtration or aqueous and organic or corrosive liquids for particulate contamination analysis. The holder can also be used for HPLC solvent preparation. The vacuum

  • Filter Holder Manifolds

    MilliporeSigma

    …steel filter holders fitted with standard No. 8 perforated stoppers over holder outlets. Manifolds connect to single vacuum source and use separate control valves at each station for independent operation. Use vent ports on each stainless manifold station to attach Swinnex filter holders or…

  • …Glass Vacuum Holder Assemblies, 47mm Glass Vacuum Holder - PTFE Seal, 90mm Glass Vacuum Holder Assemblies , and  47mm Stainless Steel Vacuum Holder , see 1177G36 and  1177G60 For accessories that work with  47mm Sterility Test Filter Holder , see 1177G36…

  • …pharmaceuticals  Use with sterility test manifold Borosilicate glass filter holder assembly for the microanalysis of liquids for biological or particulate contamination under vacuum. The Sterility Test holder is recommended for microbiological or sterility testing where ambient…

  • Filter Holders

    Sartorius

    Accessories for Combisart and Microsart Combi.jet Vacuum Manifolds

  • Membrane holder produced from borosilicate glass, suitable for aqueous and organic solvent filtration. Membrane holder produced from borosilicate glass, suitable for aqueous and organic solvent filtration. Vacuum type glass holders Produced from borosilicate glass and available with a choice of…

  • …Glass Filter Holders. This item is an accessory item for multiple kits.Features & Benefits:. Side arm connects to vacuum source with 3/8 in. I.D. hose. 1 L and 4 L flasks accept No. 8 perforated stopper. 125 mL flask accepts No. 5 stopperApplications:Vacuum Filtration Using Classic Filter Holders

  • Stainless Steel Vacuum Manifold

    Thermo Scientific Nalgene

    Nalgene 345 Solid and stable on the bench top Designed with three vacuum outlets, each with leakproof, two-way valve and vent port Each outlet securely holds a No. 8 stopper and the stem filter funnel without interference Autoclavable Easy manipulation of individual funnels…

  • Polysulfone Bottle-Top Filter Holders

    Thermo Scientific Nalgene

    …top filter with the ability to re-use the filter housing Nalgene 320 Autoclavable Securely screws onto glass media bottles* with 33 mm or 45 mm neck sizes Deep screw threads attach directly to bottle allowing convenient filling and vacuum filtration without holding filter to bottle…

  • BioVac 96 Vacuum Manifold instument that extracts 96 samples of DNA/RNA/Genomic DNA in short amount of time.

  • …accomodate 90mm holders. Use 47mm or smaller holder units on the 6-place model. Valves have a PTFE stopcock. Available with 2-way or 3-way valves. Use the 3-way valve when the manifold is used under closed conditions and must be vented to the atmosphere without breaking the vacuum connection. The…

  • Reusable Filter Holders with Receiver

    Thermo Scientific Nalgene

    Polysulfone filter funnels For 47 mm diameter membrane filters Eliminates the need for a manifold and/or breakable glass vacuum flask Particularly useful for field work Receiver is graduated Non-sterile Autoclavable Two side-arms allow connection to vacuum line; also…

  • …PTFE seal  Sintered glass, Stainless steel, or PTFE filter support Borosilicate glass filter holder assemblies for the microanalysis of liquids for biological or particulate contamination under vacuum. The PTFE Seal holder eliminates the problem of the membrane adhering to the ground…

  • …to replace parts contained in Millipore glass vacuum filtration kits or provide for an alternative configuration. This item is an accessory part for the Millipore 47 mm Classic Glass Filter Holder Kits, Millipore 47 mm All-Glass Filter Holder Kits, and Millipore MilliSolve Kit. Application:…

  • For general purpose vacuum filtration Borosilicate glass funnel body and stem are attached securely by quick-action spring clamp of anodized aluminum Easily disassembled for loading, cleaning and autoclaving Include single-hole silicone rubber stopper

  • …and can be sterilized in dry heat to 180°C.Can be used up to 200°C.GV 025 Series GV 025/0 Glass Vacuum Filtration Device, glass frit filter, rubber stopper connection, membrane filter accessories Cytiva offers a choice of Whatman holders for use with membrane filters.

  • …and can be sterilized in dry heat to 180°C.Can be used up to 200°C.GV 100 Series GV 100/0 Glass Vacuum Filtration Device, glass frit filter, rubber stopper connection, membrane filter accessories Cytiva offers a choice of Whatman holders for use with membrane filters.

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.