Vacuum Filter Holder

Compare Tool

Select up to 3 products

Vacuum Filter Holder
1 - 32 of 48
Sort
View
Show
  • Vacuum Filter Holder Set, 90mm

    United Scientific Supplies

    This all-glass filter holder is used in particulate contamination analysis for filtering aqeuous, organic, or corrosive liquids. It is also recommended for HPLC solvent filtration. Complete set includes a borosilicate glass funnel, anodized aluminum spring clamp, vacuum base with sintered disc,…

  • Vacuum Filter Holder Set, Fritted Glass

    United Scientific Supplies

    …clamp, and perforated silicone stopper. Parts are available seperately. Filter Diameter: 47mm, Filtration area is 9.6cm². Capacity: Funnel: 300ml, Flask: 1L. Outlet fitting: 6mm (1/4") O.D. tubulated cap sidearm to vacuum. Prefilter Diameter: Thick Depth Prefilter: 35mm. Membrane Prefilter:…

  • Whatman GV 025 Series Glass Vacuum Filtration Device

    GE Healthcare

    …solutions.Autoclavable and can be sterilized in dry heat to 180°C.Can be used up to 200°C.GV 025 Series GV 025/0 Glass Vacuum Filtration Device, glass frit filter, rubber stopper connection, membrane filter accessories GE Healthcare offers a choice of Whatman holders for use with membrane filters.

  • Reusable Filter Holders with Receiver

    Thermo Scientific Nalgene

    Polysulfone filter funnels For 47 mm diameter membrane filters Eliminates the need for a manifold and/or breakable glass vacuum flask Particularly useful for field work Receiver is graduated Non-sterile Autoclavable Two side-arms allow connection to vacuum line; also…

  • 47mm Glass Vacuum Holder Assemblies

    Advantec MFS

    …steel, or PTFE support Borosilicate glass filter holder assemblies for the microanalysis of liquids for biological or particulate contamination under vacuum. The 47mm holder is the standard size for microbiology and uses a 47mm filter membrane. The anodized aluminum clamp secures the…

  • 47mm Glass Vacuum Holder, PTFE Seal

    Advantec MFS

    …PTFE seal  Sintered glass, Stainless steel, or PTFE filter support Borosilicate glass filter holder assemblies for the microanalysis of liquids for biological or particulate contamination under vacuum. The PTFE Seal holder eliminates the problem of the membrane adhering to the ground…

  • Whatman Vacuum Type Glass Holders

    GE Healthcare

    Membrane holder produced from borosilicate glass, suitable for aqueous and organic solvent filtration. Membrane holder produced from borosilicate glass, suitable for aqueous and organic solvent filtration. Vacuum type glass holders Produced from borosilicate glass and available with a choice of…

  • Aerosol Standard Filter Holder, 47mm, Stainless Steel

    MilliporeSigma

    …or from closed systems for particulate contamination analysis. Standard holder Closed system connection, with inlet dispersion chamber and 11 mm O.D. inlet/outlet connections. Open-type holder Full-area inlet (11 mm O.D.) for open atmosphere sampling. Threaded outlet (11…

  • Whatman Vacuum-Type Glass Membrane Holder, glass reservoir

    GE Healthcare

    Vacuum-Type Glass Membrane Holder, glass reservoir, 47 mm, 300 ml volume, membrane filter accessories Vacuum-Type Glass Membrane Holder, glass reservoir, 47 mm, 300 ml volume, membrane filter accessories

  • Polysulfone Bottle-Top Filter Holders

    Thermo Scientific Nalgene

    …top filter with the ability to re-use the filter housing Nalgene 320 Autoclavable Securely screws onto glass media bottles* with 33 mm or 45 mm neck sizes Deep screw threads attach directly to bottle allowing convenient filling and vacuum filtration without holding filter to bottle…

  • Vacuum-Type Glass Membrane Holders

    GE Healthcare

    For general purpose vacuum filtration Borosilicate glass funnel body and stem are attached securely by quick-action spring clamp of anodized aluminum Easily disassembled for loading, cleaning and autoclaving Include single-hole silicone rubber stopper

  • Polysulfone Vacuum Filter Holders

    Advantec MFS

    47mm Filter Graduated Funnels: 300mL, 500mL, 800mL Autoclavable Advantec’s Polysulfone 47mm Filter Holders are an economical alternative to glass vacuum holders. The durable polysulfone plastic construction is chemically resistant and can withstand mishandling. The recessed…

  • Filter Holders

    Sartorius

    Accessories for Combisart and Microsart Combi.jet Vacuum Manifolds

  • 47mm Stainless Steel Vacuum Holder

    Advantec MFS

    …Can be flame sterilized The 47mm Stainless Steel Holder for the microanalysis of liquids for biological or particulate contamination under vacuum filtration. The unbreakable 304ss unit may be flame sterilized to sanitize the holder between samples. The 500mL funnel connects to the base…

  • Vacuum Filter Holder Set, 47mm

    United Scientific Supplies

    This all-glass filter holder is used in particulate contamination analysis for filtering aqeuous, organic, or corrosive liquids. It is also recommended for HPLC solvent filtration. Complete set includes a borosilicate glass funnel, anodized aluminum spring clamp, vacuum base with sintered disc,…

  • Vacuum Filter Holder Set with PTFE-Coated Funnel & Base

    United Scientific Supplies

    Designed for bacteriological analysis where it is necessary to sterilize the filter holder with the membrane filter in place. The glass surface is coated with PTFE to avoid filter damage and membrane adhesion during autoclaving. Complete set includes a PTFE-faced borosilicate glass funnel and…

  • Whatman GV 100 Series Glass Vacuum Filtration Device

    GE Healthcare

    …solutions.Autoclavable and can be sterilized in dry heat to 180°C.Can be used up to 200°C.GV 100 Series GV 100/0 Glass Vacuum Filtration Device, glass frit filter, rubber stopper connection, membrane filter accessories GE Healthcare offers a choice of Whatman holders for use with membrane filters.

  • Whatman GV 050 Series Glass Vacuum Filtration Device

    GE Healthcare

    …in dry heat to 180°C.Can be used up to 200°C.GV 050 Series GV 050/0 Glass Vacuum Filtration Device, glass frit filter, rubber stopper connection, silicone cap and supplied with air inlet, membrane filter accessories GE Healthcare offers a choice of Whatman holders for use with membrane filters.

  • Microanalysis Vacuum Filter Holder Set, Stainless

    United Scientific Supplies

    …a vacuum filter. Includes a stainless steel filter support and No. 5 perforated silicone stopper for easy attachment to a vacuum filtering flask. Membrane filters are not included. Thick prefilters or laminated filters will not seal in this holder and it is not autoclavable with membrane filters

  • 13mm Glass Vacuum Holder Assemblies

    Advantec MFS

    Filter small volumes  3 funnel sizes  Concentrate samples in small area Borosilicate glass filter holder assembly for microanalysis of small volumes of liquids under vacuum. Filter biological samples or organic solvents. The holder utilizes a 25mm filter membrane yet…

  • XX1104710

    MilliporeSigma

    …use with standard 1 L vacuum filtering flask or multiple place manifold. Sterifil holder, 250 mL, includes the following components: Sterifil cover, Caps, Swinnex® Filter Holder, Sterifil funnel, Sterifil holder base, Support screen for 47-mm Swinnex filter holder, O-ring, (5-329), Stopper.…

  • Vacuum Filter Holder Set with Stainless Steel Screen

    United Scientific Supplies

    …and perforated silicone stopper. Parts are also available seperately. Filter Diameter: 47mm, Filtration area is 9.6cm². Capacity: Funnel: 300ml, Flask: 1L. Outlet fitting: 6mm (1/4") O.D. tubulated cap sidearm to vacuum. Prefilter Diameter: Thick Depth Prefilter: 35mm. Membrane Prefilter:…

  • Kit Of 2 Vacuum Tubing Adapters For Reusable Filter Holders #300 & #310

    Thermo Scientific Nalgene

    2 Vacuum Tubing Adapters for 300- & 310- series Reusable Filter Holders

  • High Output & Chemical Duty Pumps

    MilliporeSigma

    …vapors Portable design allows for easy sharing between workstations Applications Vacuum Source for Filter Holders, Manifolds, and Devices, including Samplicity® Filtration System, SNAP i.d.® 2.0 System, Multiscreen®HTS Filtration Manifold, and Stericup® Filters

  • XX2004718

    MilliporeSigma

    Designed for use with Millipore stainless steel vacuum filter holders Stopper Size: No. 8 Hole I.D.: 9.5mm (3/8 in.) Silicone rubber construction

  • Microfil V Filtration Device

    MilliporeSigma

    …no filter holders to assemble, no filter funnels to clean, and no filter support sterilization is needed after each filtration. Simply snap a Microfil V filtration device off the convenient carrying tray and you're ready to test. Place the device on a standard number 8 stopper or a vacuum

  • Microanalysis Vacuum Filter Holder Set, Fritted Glass

    United Scientific Supplies

    …a vacuum filter. Includes a fritted glass filter support and No. 5 perforated silicone stopper for easy attachment to a vacuum filtering flask. Membrane filters are not included. Thick prefilters or laminated filters will not seal in this holder and it is not autoclavable with membrane filters

  • Kit Of 8 Vacuum Caps And (1) Tubing Adapter For Reusable Filter Holders

    Thermo Scientific Nalgene

    Adapter kit for Reusable Filter Holders Consists of 8 vacuum caps and a tubing adapter

  • 25mm Glass Vacuum Holder Assemblies

    Advantec MFS

    Filter small volumes  3 funnel sizes available Sintered Glass or Stainless Steel support Borosilicate glass filter holder assemblies for the microanalysis of small volumes of liquids for biological or particulate contamination under vacuum. The holder utilizes a 25mm filter

  • 90mm Glass Vacuum Holder Assemblies

    Advantec MFS

    Filter larger volumes of liquid  Filter viscous, heavy particle or biobuden samples Sintered glass or Stainless steel support Borosilicate glass filter holder assemblies for the microanalysis of liquids for biological or particulate contamination under vacuum. The 90mm holder

  • Filter Holder Manifolds

    MilliporeSigma

    …steel filter holders fitted with standard No. 8 perforated stoppers over holder outlets. Manifolds connect to single vacuum source and use separate control valves at each station for independent operation. Use vent ports on each stainless manifold station to attach Swinnex filter holders or…

  • 47mm Sterility Test Filter Holder

    Advantec MFS

    …pharmaceuticals  Use with sterility test manifold Borosilicate glass filter holder assembly for the microanalysis of liquids for biological or particulate contamination under vacuum. The Sterility Test holder is recommended for microbiological or sterility testing where ambient…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.