Vacuum Filter Flask

Compare Tool

Select up to 3 products

Vacuum Filter Flask
1 - 32 of 97
Sort
View
Show
  • For use in vacuum filtration applications Withstands full vacuum (to 30” Hg) With hose barb for 1/4” I.D. tubing

  • …the flask through a ground joint or rubber stopper. The applied vacuum facilitates the filtration process. These flasks have permanent blue enamel marking spots. The filtering flask is designed to ASTM E-1406 Type 2. Heavy Wall Filtering Flasks These PYREX® VISTA™ filtering flasks

  • … 45mm neck size The Denville 250ml, 500ml and 1000ml Vacuum Filtration Flasks are ideal for separation and purification of your samples. Membrane material includes PES and PVDF in .22µm and .45µm. Our flasks have a wide bottle opening for easy access and pouring of your…

  • Vacuum Filter Holder Set, 47mm

    United Scientific Supplies

    …glass funnel, anodized aluminum spring clamp, vacuum base with sintered disc, and ground joint flask. Membrane filters are not included. Filter diameter is 47mm. Filtration area is 9.6cm². Capacity: Funnel: 300ml, Flask: 1L. Outlet fitting: 6mm (1/4") O.D. tubulated cap sidearm to vacuum.

  • Solvent Filtration Disposable Vacuum Bottle Top Filters

    labForce (a Thomas Scientific Brand)

    …Simply plug the filter onto your vacuum line, and begin filtering your solvent without any complex setup. The FDA-grade Polypropylene housing provides vastly improved chemical compatibility over the usual Polystyrene bottle top filter. The labForce Solvent Filtration vacuum filters are a safe…

  • Filtration Vacuum Pump Kit

    GSC International, Inc.

    …water source or vacuum aspirator. It is more economical than an electric vacuum pump. The pumping rate is 15ml per stroke and will displace up to 725ml of air. The pump is fitted with a valve to release the vacuum. Includes: 1 Borosilicate Filtering Flask, 500ml 1 Vacuum Pump 1 Buchner…

  • KimCote® Filtering Side Arm Flasks

    DWK Life Sciences (Kimble)

    …from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements A second flask should be connected between the filtering flask and the vacuum source to prevent accidental entry of the filtrate into the vacuum line or pump.

  • FTA-2i Advanced Aspirator

    Grant Instruments

    …trap flask Fitted with hydrophobic microbiological filter Vacuum pressure: -200 to -800mbar (adjustable) Overflow protection - liquid level sensor detects excess liquid and prevents overflow The use of an aspirator is preferential to using a generic laboratory vacuum line as…

  • 10L Bottle/Filter Flask

    United Scientific Supplies

    With its thick glass walls and sturdy construction, this 10L bottle/flask is perfect for filtering large volumes of liquid. The thick walls and design enables this flask to withstand vacuum filtration without imploding. Graduated in 1000mL increments on a scale from 2000mL to 8000mL with an accuracy…

  • No. 8 Perforated Stopper

    MilliporeSigma

    Designed for use with 1L and 4L vacuum filtering flasks and 47mm vacuum filter holder assemblies 100% Silicone Material Perforated, 1-hole accepts filter holder assemblies and tubing Pack of 5

  • filter acidic solutions at a higher flow rate. Available in four graduated funnel capacities 100, 300, 500, or 1000 mL. The No.8 silicone stopper mounts in a standard 1L vacuum filter flask or manifold cup. The optional 2" glass extention allows for physical separation of the 47mm filters

  • WT 100 Witt's Flask, 1000 ml with tubing nozzle, vacuum filtration apparatus accessories, for filtrate collection in an inserted container. WT 100 Witt's Flask, 1000 ml with tubing nozzle, vacuum filtration apparatus accessories, for filtrate collection in an inserted container. The bottle is made…

  • Sterile Disposable Filter Funnel Unit

    Thermo Scientific Nalgene

    … 47 mm diameter filter with grid Ideal for use with filtering flasks or manifolds Convenient snap-away design with removable membrane; funnel marked at 100 mL Safer and easier to use than cumbersome glass and metal funnels Each package contains a Nalgene vacuum adapter to replace…

  • Filtering Flask Kit (Vacuum Pump Kit)

    GSC International, Inc.

    …using vacuum filtration. Included is a 500ml Borosilicate Filtering Flask, Vacuum Pump, Porcelain Buchner Funnell, 9cm filter paper, connection tubing, and a rubber stopper. The stopper hole is specially cut to hold the Buchner funnel. The Vacuum Pump is simplifies the process of vacuum filtration,…

  • Vactrap™ Vacuum Trap System

    Foxx Life Sciences

    …includes two shatterproof Foxx Heavy Duty Vacuum Bottles (autoclavable PP or chemically-resistant HDPE), each with a patented VersaCap closure for tangle-free opening --no need to disconnect tubing, ever. A 0.2µm PTFE Inline Vent Filter retains any aerosolized bacteria, and the…

  • With tooled neck for uniform stopper fit. Side hose connection is #11 Ace-Thred that accepts a PTFE Tubing Connector with silicone O-Ring and Nylon bushing to make an easier, safer, more convenient vacuum hose connection. Two connectors are available:

  • Reusable Filter Holders with Receiver

    Thermo Scientific Nalgene

    Polysulfone filter funnels For 47 mm diameter membrane filters Eliminates the need for a manifold and/or breakable glass vacuum flask Particularly useful for field work Receiver is graduated Non-sterile Autoclavable Two side-arms allow connection to vacuum line; also…

  • …positioning of the connector provides greater flask stability, as tubing angled downward has less tendency to tilt the flask Flasks are designed for vacuum to 29” of mercury Made with a heavier wall than a standard Erlenmeyer flask Manufactured from 33 expansion, low extractable…

  • for 47 mm filters with glass support, NS 40/35 joints, 4 L flask (included) Funnel volume is 1000 mL General description Same as Z290432 but with NS 40/35 jont (male on flask, female on funnel support) instead of rubber stopper. Vacuum filtration apparatus for HPLC solvent…

  • Filtering Flask Kit (Vacuum Pump Kit)

    GSC International, Inc.

    The Gas Generating Bottle is useful in the production of gasses and provides a funnel tube and a connecting tube. Includes a 500ml capacity Bottle, 2-hole Rubber Stopper, Thistle Tube and a 90 degree angle connector tube.

  • …into the filtrate. Available in three graduated funnel capacities 15, 150, or 300 mL. The No.5 silicone stopper mounts in a standard 125mL vacuum filter flask.  Unit includes: Funnel, Base/Support(gasket w/ screen), Clamp, Stopper Please Note: ALL Advantec items have a maximum 48…

  • Vacuum Gasket for Filter Funnels

    Thermo Scientific Nalgene

    Replace #7 or #8 stoppers in any manifold or filtering flask with the Thermo Scientific™ Nalgene™ Vacuum Gasket for Filter Funnels. Permits filter funnel to slide quickly and easily in and out of gasket. These filtration products offer reliability, accuracy and safety for many research…

  • HEAVY WALL Erlenmeyer shaped filtering flask with standard taper outer joint and serrated hose connection for attachment to vacuum source. For stoppers see CG-3000.

  • Filter small volumes  Ground glass connection points Funnel, Base, and Flask Borosilicate glass filter holder assemblies for the microanalysis of liquids for biological or particulate contamination under vacuum. The All-Glass design restricts contact with reactive surfaces such as…

  • …drip tip to prevent contamination of the vacuum line with filtrate droplets. Each apparatus is supplied with funnel, anodized aluminum clamp, fritted glass support base and filtration flask. Joints are Standard Taper 40/35. Recommended when filtering viscous or proteinaceous solutions to…

  • …performance as the original Stericup® filters, with design enhancements recommended by scientists like you. The Stericup® Quick Release systems combine a Steritop® vacuum filter unit with a redesigned receiver bottle for filtering and storing volumes from 150 to 1000 mL, and…

  • 47mm Filter Graduated Funnels: 300mL, 500mL, 800mL Autoclavable Advantec’s Polysulfone 47mm Filter Holders are an economical alternative to glass vacuum holders. The durable polysulfone plastic construction is chemically resistant and can withstand mishandling. The recessed…

  • …a vacuum filter. Includes a stainless steel filter support and No. 5 perforated silicone stopper for easy attachment to a vacuum filtering flask. Membrane filters are not included. Thick prefilters or laminated filters will not seal in this holder and it is not autoclavable with membrane filters

  • Polypropylene Filtering Flasks

    Thermo Scientific Nalgene

    Polypropylene flasks are molded in one piece to withstand full vacuum to 30" Hg Oval marking area Autoclavable Tubulation at 45° angle prevents tipping. Barbed adapter accepts 1/4" to 3/8" I. D. tubing

  • XX1104710

    MilliporeSigma

    …receiver flask and cover) to use with standard 1 L vacuum filtering flask or multiple place manifold. Sterifil holder, 250 mL, includes the following components: Sterifil cover, Caps, Swinnex® Filter Holder, Sterifil funnel, Sterifil holder base, Support screen for 47-mm Swinnex filter

  • …The 304ss screen(w/ PTFE gasket) ensures particles will not be shed into the filtrate. The No.8 silicone stopper mounts in a standard 1L vacuum filter flask or manifold cup. Unit includes: Funnel, Base, Support, Gasket, Stopper Please Note: ALL Advantec items have a maximum 48 hour…

  • These flasks, also called vacuum flasks, have a side-arm with a 45° downward angle to prevent tipping.   Reduce broken glassware with this flask constructed of FDA grade polypropylene Side Arm accepts flexible tubing from 3/8" to 1/2" I.D. 1000 ml capacity

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.