Vacuum Filter Flask

Compare Tool

Select up to 3 products

Vacuum Filter Flask
1 - 32 of 95
Sort
View
Show
  • Denville® Vacuum Filtration Flasks

    Denville

    … 45mm neck size The Denville 250ml, 500ml and 1000ml Vacuum Filtration Flasks are ideal for separation and purification of your samples. Membrane material includes PES and PVDF in .22µm and .45µm. Our flasks have a wide bottle opening for easy access and pouring of your…

  • PYREX Vacuum Filter Flask

    Corning

    For use in vacuum filtration applications Withstands full vacuum (to 30” Hg) With hose barb for 1/4” I.D. tubing

  • Vacuum Filter Holder Set, 47mm

    United Scientific Supplies

    …glass funnel, anodized aluminum spring clamp, vacuum base with sintered disc, and ground joint flask. Membrane filters are not included. Filter diameter is 47mm. Filtration area is 9.6cm². Capacity: Funnel: 300ml, Flask: 1L. Outlet fitting: 6mm (1/4") O.D. tubulated cap sidearm to vacuum.

  • Sigma-Aldrich® vacuum filtration assembly

    MilliporeSigma

    for 47 mm filters with glass support, NS 40/35 joints, 4 L flask (included) Funnel volume is 1000 mL General description Same as Z290432 but with NS 40/35 jont (male on flask, female on funnel support) instead of rubber stopper. Vacuum filtration apparatus for HPLC solvent…

  • Vacuum Filter Holder Set, 90mm

    United Scientific Supplies

    …for filtering aqeuous, organic, or corrosive liquids. It is also recommended for HPLC solvent filtration. Complete set includes a borosilicate glass funnel, anodized aluminum spring clamp, vacuum base with sintered disc, and ground joint flask. Membrane filters are not included. Filter diameter…

  • Polypropylene Filtering Flasks

    Thermo Scientific Nalgene

    Polypropylene flasks are molded in one piece to withstand full vacuum to 30" Hg Oval marking area Autoclavable Tubulation at 45° angle prevents tipping. Barbed adapter accepts 1/4" to 3/8" I. D. tubing

  • Solvent Filtration Disposable Vacuum Bottle Top Filters

    labForce (a Thomas Scientific Brand)

    …Simply plug the filter onto your vacuum line, and begin filtering your solvent without any complex setup. The FDA-grade Polypropylene housing provides vastly improved chemical compatibility over the usual Polystyrene bottle top filter. The labForce Solvent Filtration vacuum filters are a safe…

  • Vacuum Filter Holder Set, Fritted Glass

    United Scientific Supplies

    …clamp, and perforated silicone stopper. Parts are available seperately. Filter Diameter: 47mm, Filtration area is 9.6cm². Capacity: Funnel: 300ml, Flask: 1L. Outlet fitting: 6mm (1/4") O.D. tubulated cap sidearm to vacuum. Prefilter Diameter: Thick Depth Prefilter: 35mm. Membrane Prefilter:…

  • Whatman WT 100 Witt's Flask

    GE Healthcare

    WT 100 Witt's Flask, 1000 ml with tubing nozzle, vacuum filtration apparatus accessories, for filtrate collection in an inserted container. WT 100 Witt's Flask, 1000 ml with tubing nozzle, vacuum filtration apparatus accessories, for filtrate collection in an inserted container. The bottle is made…

  • KimCote® Filtering Flasks

    DWK Life Sciences (Kimble)

    …from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements A second flask should be connected between the filtering flask and the vacuum source to prevent accidental entry of the filtrate into the vacuum line or pump.

  • 90mm Glass Vacuum Holder Assemblies

    Advantec MFS

    Filter larger volumes of liquid  Filter viscous, heavy particle or biobuden samples Sintered glass or Stainless steel support Borosilicate glass filter holder assemblies for the microanalysis of liquids for biological or particulate contamination under vacuum. The 90mm holder…

  • Microanalysis Vacuum Filter Holder Set, Fritted Glass

    United Scientific Supplies

    …a vacuum filter. Includes a fritted glass filter support and No. 5 perforated silicone stopper for easy attachment to a vacuum filtering flask. Membrane filters are not included. Thick prefilters or laminated filters will not seal in this holder and it is not autoclavable with membrane filters

  • Vacuum Filter Holder Set with PTFE-Coated Funnel & Base

    United Scientific Supplies

    …and perforated silicone stopper. Parts are also available seperately. Filter Diameter: 47mm, Filtration area is 9.6cm². Capacity: Funnel: 300ml, Flask: 1L. Outlet fitting: 6mm (1/4") O.D. tubulated cap sidearm to vacuum. Prefilter Diameter: Thick Depth Prefilter: 35mm. Membrane Prefilter:…

  • Vacuum Filter Holder Set with Stainless Steel Screen

    United Scientific Supplies

    …and perforated silicone stopper. Parts are also available seperately. Filter Diameter: 47mm, Filtration area is 9.6cm². Capacity: Funnel: 300ml, Flask: 1L. Outlet fitting: 6mm (1/4") O.D. tubulated cap sidearm to vacuum. Prefilter Diameter: Thick Depth Prefilter: 35mm. Membrane Prefilter:…

  • 47mm Stainless Steel Vacuum Holder

    Advantec MFS

    …The 304ss screen(w/ PTFE gasket) ensures particles will not be shed into the filtrate. The No.8 silicone stopper mounts in a standard 1L vacuum filter flask or manifold cup. Unit includes: Funnel, Base, Support, Gasket, Stopper Please Note: ALL Advantec items have a maximum 48 hour…

  • Reusable Filter Holders with Receiver

    Thermo Scientific Nalgene

    Polysulfone filter funnels For 47 mm diameter membrane filters Eliminates the need for a manifold and/or breakable glass vacuum flask Particularly useful for field work Receiver is graduated Non-sterile Autoclavable Two side-arms allow connection to vacuum line; also…

  • Polysulfone Vacuum Filter Holders

    Advantec MFS

    47mm Filter Graduated Funnels: 300mL, 500mL, 800mL Autoclavable Advantec’s Polysulfone 47mm Filter Holders are an economical alternative to glass vacuum holders. The durable polysulfone plastic construction is chemically resistant and can withstand mishandling. The recessed…

  • Stericup® Quick Release Vacuum Driven Sterile Filters

    MilliporeSigma

    …performance as the original Stericup® filters, with design enhancements recommended by scientists like you. The Stericup® Quick Release systems combine a Steritop® vacuum filter unit with a redesigned receiver bottle for filtering and storing volumes from 150 to 1000 mL, and…

  • Filtering Flask Kit (Vacuum Pump Kit)

    GSC International, Inc.

    The Gas Generating Bottle is useful in the production of gasses and provides a funnel tube and a connecting tube. Includes a 500ml capacity Bottle, 2-hole Rubber Stopper, Thistle Tube and a 90 degree angle connector tube.

  • 47mm Filtration Assembly with Standard Taper 40/35 Joint Connection and Fritted…

    DWK Life Sciences (Wheaton)

    …glass Vacuum hose connection is located above the filtration drip tip to prevent contamination in the vacuum line Filter area approximately 9.6 cm 2 capacity of funnel 300 mL; capacity of flask 1 L; vacuum connection 6.35 mm o.d.; dimensions 140 mm diameter flask, 76 mm diameter…

  • Filtering Flask Kit (Vacuum Pump Kit)

    GSC International, Inc.

    …using vacuum filtration. Included is a 500ml Borosilicate Filtering Flask, Vacuum Pump, Porcelain Buchner Funnell, 9cm filter paper, connection tubing, and a rubber stopper. The stopper hole is specially cut to hold the Buchner funnel. The Vacuum Pump is simplifies the process of vacuum filtration,…

  • Whatman SF 100 Suction Flask

    GE Healthcare

    SF 100 Suction Flask, 1000 ml with tubing nozzle, vacuum filtration apparatus accessories SF 100 Suction Flask, 1000 ml with tubing nozzle, vacuum filtration apparatus accessories

  • Flasks, Filtering, Heavy Wall

    Chemglass

    HEAVY WALL Erlenmeyer shaped filtering flask with standard taper outer joint and serrated hose connection for attachment to vacuum source. For stoppers see CG-3000.

  • Stericup Quick Release-GV Sterile Vacuum Filtration System

    MilliporeSigma

    …® vacuum filtration system is the most efficient single-use, disposable process for sterile media preparation. It combines a Steritop ® filter unit with a receiver flask for processing and storing volumes from 150 mL to 1,000 mL in a single, ready-to-use format. Its no-tip, easy-grip flask

  • 10L Bottle/Filter Flask

    United Scientific Supplies

    With its thick glass walls and sturdy construction, this 10L bottle/flask is perfect for filtering large volumes of liquid. The thick walls and design enables this flask to withstand vacuum filtration without imploding. Graduated in 1000mL increments on a scale from 2000mL to 8000mL with an accuracy…

  • P-Vac Portable Vacuum System

    Argos Technologies

    …bottle top aspirating filter units, plastic vacuum bottles, glass Erlenmeyer flasks, or any device that accepts vacuum. The rechargeable lithium ion battery allows for use where an inline vacuum source is not available, outside of the laboratory setting where a vacuum is required, or when the…

  • Vactrap™ Vacuum Trap System

    Foxx Life Sciences

    …includes two shatterproof Foxx Heavy Duty Vacuum Bottles (autoclavable PP or chemically-resistant HDPE), each with a patented VersaCap closure for tangle-free opening --no need to disconnect tubing, ever. A 0.2µm PTFE Inline Vent Filter retains any aerosolized bacteria, and the…

  • Microanalysis Vacuum Filter Holder Set, Stainless

    United Scientific Supplies

    …a vacuum filter. Includes a stainless steel filter support and No. 5 perforated silicone stopper for easy attachment to a vacuum filtering flask. Membrane filters are not included. Thick prefilters or laminated filters will not seal in this holder and it is not autoclavable with membrane filters

  • PYREX® VISTA™ Filtering Flasks

    Corning

    …the flask through a ground joint or rubber stopper. The applied vacuum facilitates the filtration process. These flasks have permanent blue enamel marking spots. The filtering flask is designed to ASTM E-1406 Type 2. Heavy Wall Filtering Flasks These PYREX® VISTA™ filtering flasks

  • 47mm Magnetic Filter Funnels

    Pall Life Sciences

    For vacuum filtration of liquids, especially for the analysis of aqueous samples for microbiological and particulate contamination using the Membrane Filter (MF) Technique. The Magnetic Filter Funnel is ideal for use with a filter funnel manifold or side-arm vacuum flask using a rubber stopper…

  • No. 8 Perforated Stopper

    MilliporeSigma

    Designed for use with 1L and 4L vacuum filtering flasks and 47mm vacuum filter holder assemblies 100% Silicone Material Perforated, 1-hole accepts filter holder assemblies and tubing Pack of 5

  • Support Assemblies, 47mm, Fritted

    Chemglass

    Glassware system for vacuum filtration using 47mm membranes. Assembly is designed for use with vacuum manifolds or optional plastic coated filtering flask. Support base has a sealed-in coarse porosity fritted disc. Complete assembly includes a 300mL graduated funnel, aluminum clamp, support base and…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.