Vacuum Filter Assembly

Compare Tool

Select up to 3 products

Vacuum Filter Assembly
1 - 32 of 60
Sort
View
Show
  • Vacuum Filter Assemblies

    DWK Life Sciences (Wheaton)

    …a coarse porosity fritted glass filter support base, an aluminum clamp and a 300 mL glass funnel Screen is removable in assemblies with stainless steel support screen. Assemblies with Teflon® faced bases and funnels allow the assembly to be autoclaved with the filter membrane in place.

  • Sigma-Aldrich® vacuum filtration assembly

    MilliporeSigma

    for 47 mm filters with glass support, NS 40/35 joints, 4 L flask (included) Funnel volume is 1000 mL General description Same as Z290432 but with NS 40/35 jont (male on flask, female on funnel support) instead of rubber stopper. Vacuum filtration apparatus for HPLC solvent…

  • Denville® Vacuum Filtration Flasks

    Denville

    …non-pyrogenic & gamma irradiated Filtration tops fit on 45mm neck bottles 45mm neck size The Denville 250ml, 500ml and 1000ml Vacuum Filtration Flasks are ideal for separation and purification of your samples. Membrane material includes PES and PVDF in .22µm and .45µm.…

  • Solvent Filtration Disposable Vacuum Bottle Top Filters

    labForce (a Thomas Scientific Brand)

    …Top Vacuum Filters offer a revolutionary approach to bulk solvent filtration. Safer, faster, and easier to use than conventional glass filtration assemblies, labForce’s Solvent Filtration funnels screw onto any vacuum-capable GL45 threaded bottle. Simply plug the filter onto your vacuum line,…

  • Vacuum Pump 115V

    PerkinElmer

    The vacuum assisted Digi FILTER assembly provides a quick and easy way to filter samples prior to analysis.

  • Vacuum Pump Exhaust Filters

    vacuum pump exhaust Prevent oil accumulation in ductwork Recover expensive lubricating oils Eliminate potential OSHA and EPA violations High-efficiency filter cartridge continuously drains the collected liquids, allowing the user to recover lubricating fluid. Filter assemblies

  • 13mm Glass Vacuum Holder Assemblies

    Advantec MFS

    Filter small volumes  3 funnel sizes  Concentrate samples in small area Borosilicate glass filter holder assembly for microanalysis of small volumes of liquids under vacuum. Filter biological samples or organic solvents. The holder utilizes a 25mm filter membrane yet…

  • 25mm Glass Vacuum Holder Assemblies

    Advantec MFS

    Filter small volumes  3 funnel sizes available Sintered Glass or Stainless Steel support Borosilicate glass filter holder assemblies for the microanalysis of small volumes of liquids for biological or particulate contamination under vacuum. The holder utilizes a 25mm filter

  • 90mm Glass Vacuum Holder Assemblies

    Advantec MFS

    Filter larger volumes of liquid  Filter viscous, heavy particle or biobuden samples Sintered glass or Stainless steel support Borosilicate glass filter holder assemblies for the microanalysis of liquids for biological or particulate contamination under vacuum. The 90mm holder…

  • 47mm Glass Vacuum Holder Assemblies

    Advantec MFS

    …steel, or PTFE support Borosilicate glass filter holder assemblies for the microanalysis of liquids for biological or particulate contamination under vacuum. The 47mm holder is the standard size for microbiology and uses a 47mm filter membrane. The anodized aluminum clamp secures the…

  • Vacuum Manifolds

    Porvair

    …directors, the universal robotic manifold can operate with many different brands of filter plates and collection trays.  Supplied with integral vacuum gauge, the manifold provides complete control of vacuum pressure ensuring plates are processed with high reproducibility.  The manifold…

  • Accessories for Vacuum Holder and Filtation Assemblies

    Advantec MFS

    …47mm Glass Vacuum Holder Assemblies, 47mm Glass Vacuum Holder - PTFE Seal, 90mm Glass Vacuum Holder Assemblies , and  47mm Stainless Steel Vacuum Holder , see 1177G36 and  1177G60 For accessories that work with  47mm Sterility Test Filter Holder ,…

  • Autofil® 50 mL Funnel Only with 0.2 µm PES Membrane, 48/pk

    Denville

    …risk of spills. This hands-free filtration system works in conjunction with the Quick-Connect Pedestal or Cradle Ring which provides on/off vacuum flow control. These two filtering options provide a permanent vacuum hose connection if a Quick-Connect Pedestal or Cradle Ring is not available.

  • Vactrap™ Vacuum Trap System

    Foxx Life Sciences

    …Heavy Duty Vacuum Bottles (autoclavable PP or chemically-resistant HDPE), each with a patented VersaCap closure for tangle-free opening --no need to disconnect tubing, ever. A 0.2µm PTFE Inline Vent Filter retains any aerosolized bacteria, and the entire assembly is nested neatly…

  • EZ-Stream Vacuum Pump

    MilliporeSigma

    …EZ-Stream™ a cover protects the pump mechanism, and the assembly has been optimized to reduce the noise down to 60 dB. High vacuum performance Thanks to its innovative design, the EZ-Stream™ pump can provide vacuum up to 600-700 mbar, and because it transfers liquids through the…

  • Vacuum Pick Up System

    Electron Microscopy Sciences

    Vacuum Pick-up System includes: Vacuum Pick-up System complete set: Vacuum Generator, Aluminum Vacuum Pen, Five Vacuum Tips, Set of seven Rubber Vacuum Cups (size ranging: 9/16", ½", 7/16", 3/8", 5/16", 1/4" and 3/16"), an In-line Filter, and 4…

  • 47mm Stainless Steel Vacuum Holder

    Advantec MFS

    …The locking nut on the funnel secures the assembly together without twisting or tearing the membrane. The 304ss screen(w/ PTFE gasket) ensures particles will not be shed into the filtrate. The No.8 silicone stopper mounts in a standard 1L vacuum filter flask or manifold cup. Unit includes:…

  • Corning® Vacuum Filter/Storage Bottle System

    Corning

    …square filter system with a Polyethersulfone (PES) membrane for mycoplasma removal. These new 1000mL Systems are designed for filtering and storing cell culture media, biological fluids and other aqueous solutions. The new system consists of a 1000mL polystyrene receiver bottle and filter funnel…

  • 47mm Filtration Assembly with Standard Taper 40/35 Joint Connection and Fritted…

    DWK Life Sciences (Wheaton)

    …come in contact with borosilicate glass Vacuum hose connection is located above the filtration drip tip to prevent contamination in the vacuum line Filter area approximately 9.6 cm 2 capacity of funnel 300 mL; capacity of flask 1 L; vacuum connection 6.35 mm o.d.; dimensions 140 mm…

  • Vactrap™ XL Vacuum Trap System

    Foxx Life Sciences

    …two Foxx Heavy Duty Vacuum Bottles (autoclavable PP or chemically-resistant HDPE), each with a patented VersaCap® closure for tangle-free opening, no need to disconnect tubing, ever. A 0.2µm PTFE inline vent filter retains any aerosolized bacteria, and the entire assembly is nested neatly…

  • 47mm Glass Vacuum Holder, PTFE Seal

    Advantec MFS

    … PTFE seal  Sintered glass, Stainless steel, or PTFE filter support Borosilicate glass filter holder assemblies for the microanalysis of liquids for biological or particulate contamination under vacuum. The PTFE Seal holder eliminates the problem of the membrane adhering…

  • Pump Exhaust Filter

    Labconco

    … Disposable filter removes oil mist and odor from vacuum pump exhaust May be exhausted into work area without ducting Includes filter assembly, one oil mist filter cartridge and one odor filter cartridge Oil mist filter cartridge life is approximately 1 year and odor filter cartridge life…

  • Filter Funnel, Threaded

    Thermo Scientific Nalgene

    … Screw-type closure holds membrane in place Autoclavable Can be used with any filtering flask or manifold that accepts a suitable rubber stopper with hole. Includes one easy-to-use, no-twist Nalgene® vacuum gasket, which can replace a No. 7 or 8 rubber stopper with a 9/16” (15 mm) hole.

  • 47mm Sterility Test Filter Holder

    Advantec MFS

    …Borosilicate glass filter holder assembly for the microanalysis of liquids for biological or particulate contamination under vacuum. The Sterility Test holder is recommended for microbiological or sterility testing where ambient contamination must be eliminated. Complete assembly for sterility…

  • Zymo-Spin VI Columns with Zymo-Maxi Filter

    Zymo Research Corporation

    The Zymo-Spin VI with Zymo-Maxi Filter assembly can be used with vacuum manifolds for the purification of DNA and/ or RNA. The spin column and filter feature durable polypropylene construction. The spin column features a unique silicabased matrix for the purification of up to 500 µg DNA or RNA…

  • Oil Return Kit for Rotary Vane Vacuum Pump

    Labconco

    Returns oil from exhaust filter housing to pump. Needed when pump is run with the gas ballast open for extended periods of time. Includes: One (1) oil return assembly One (1) drain adaptor One (1) restrictor One (1) flexible oil-return tube Two (2) hose clips One (1)…

  • Reusable Filter Holders with Receiver

    Thermo Scientific Nalgene

    Polysulfone filter funnels For 47 mm diameter membrane filters Eliminates the need for a manifold and/or breakable glass vacuum flask Particularly useful for field work Receiver is graduated Non-sterile Autoclavable Two side-arms allow connection to vacuum line; also…

  • Filtration Assemblies & Flask

    DWK Life Sciences (Kimble)

    …strength needed for vacuum filtration Side-arm accepts standard 1/4" (6mm) i.d. tubing for connection to vacuum sources. A second flask should be connected between the filtering flask and the vacuum source to prevent accidental entry of the filtrate into the vacuum line or pump. …

  • 25mm All-Glass Filtration Assemblies

    Advantec MFS

    Filter small volumes  Ground glass connection points Funnel, Base, and Flask Borosilicate glass filter holder assemblies for the microanalysis of liquids for biological or particulate contamination under vacuum. The All-Glass design restricts contact with reactive surfaces such as…

  • 47mm All-Glass Filtration Assemblies

    Advantec MFS

    … Funnel, Base, and Flask Sintered glass, Stainless steel, or PTFE filter support Borosilicate glass filter holder assemblies for the microanalysis of liquids for biological or particulate contamination under vacuum. The All-Glass design restricts contact with reactive surfaces such as…

  • No. 8 Perforated Stopper

    MilliporeSigma

    Designed for use with 1L and 4L vacuum filtering flasks and 47mm vacuum filter holder assemblies 100% Silicone Material Perforated, 1-hole accepts filter holder assemblies and tubing Pack of 5

  • 47mm Phase/Fraction Collector Filtration Assemblies

    Advantec MFS

    …stopper or 40/35 joint Sintered glass, Stainless steel, or PTFE filter support Borosilicate glass filter holder assemblies for the microanalysis of liquids for biological or particulate contamination under vacuum. The Phase/Fraction Collector was designed for applications that require…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.