Vacuum Filter Assembly

Compare Tool

Select up to 3 products

Vacuum Filter Assembly
1 - 32 of 49
Sort
View
Show
  • Vacuum Filter Assemblies

    Wheaton

    …a coarse porosity fritted glass filter support base, an aluminum clamp and a 300 mL glass funnel Screen is removable in assemblies with stainless steel support screen. Assemblies with Teflon® faced bases and funnels allow the assembly to be autoclaved with the filter membrane in place.

  • Filter Funnel, Threaded

    Thermo Scientific Nalgene

    … Screw-type closure holds membrane in place Autoclavable Can be used with any filtering flask or manifold that accepts a suitable rubber stopper with hole. Includes one easy-to-use, no-twist Nalgene® vacuum gasket, which can replace a No. 7 or 8 rubber stopper with a 9/16” (15 mm) hole.

  • Reusable Filter Holders with Receiver

    Thermo Scientific Nalgene

    Polysulfone filter funnels For 47 mm diameter membrane filters Eliminates the need for a manifold and/or breakable glass vacuum flask Particularly useful for field work Receiver is graduated Non-sterile Autoclavable Two side-arms allow connection to vacuum line; also…

  • 47mm Filtration Assembly with Standard Taper 40/35 Joint Connection and Fritted…

    Wheaton

    …come in contact with borosilicate glass Vacuum hose connection is located above the filtration drip tip to prevent contamination in the vacuum line Filter area approximately 9.6 cm 2 capacity of funnel 300 mL; capacity of flask 1 L; vacuum connection 6.35 mm o.d.; dimensions 140 mm…

  • 13mm Glass Vacuum Holder Assemblies

    Advantec MFS

    Filter small volumes  3 funnel sizes  Concentrate samples in small area Borosilicate glass filter holder assembly for microanalysis of small volumes of liquids under vacuum. Filter biological samples or organic solvents. The holder utilizes a 25mm filter membrane yet…

  • 25mm Glass Vacuum Holder Assemblies

    Advantec MFS

    Filter small volumes  3 funnel sizes available Sintered Glass or Stainless Steel support Borosilicate glass filter holder assemblies for the microanalysis of small volumes of liquids for biological or particulate contamination under vacuum. The holder utilizes a 25mm filter

  • 47mm Stainless Steel Vacuum Holder

    Advantec MFS

    …The locking nut on the funnel secures the assembly together without twisting or tearing the membrane. The 304ss screen(w/ PTFE gasket) ensures particles will not be shed into the filtrate. The No.8 silicone stopper mounts in a standard 1L vacuum filter flask or manifold cup. Unit includes:…

  • 90mm Glass Vacuum Holder Assemblies

    Advantec MFS

    Filter larger volumes of liquid  Filter viscous, heavy particle or biobuden samples Sintered glass or Stainless steel support Borosilicate glass filter holder assemblies for the microanalysis of liquids for biological or particulate contamination under vacuum. The 90mm holder…

  • Filtration Assemblies & Flask

    Kimble

    …strength needed for vacuum filtration Side-arm accepts standard 1/4" (6mm) i.d. tubing for connection to vacuum sources. A second flask should be connected between the filtering flask and the vacuum source to prevent accidental entry of the filtrate into the vacuum line or pump. …

  • 47mm Glass Vacuum Holder, PTFE Seal

    Advantec MFS

    … PTFE seal  Sintered glass, Stainless steel, or PTFE filter support Borosilicate glass filter holder assemblies for the microanalysis of liquids for biological or particulate contamination under vacuum. The PTFE Seal holder eliminates the problem of the membrane adhering…

  • Funnel / PTFE Supp Assy 47mm

    Kimble

    This 47 mm vacuum microfiltration assembly is used for autoclaving with the filter in place and is designed to handle up to 500 mL of sample liquids for the analysis of particulate or microbiological contamination. Supplied with a 40-60 micron porosity PTFE-faced fritted glass support base,…

  • Fltr Sys, 1000ml, .2um, CN, S, Ind, 1 / 12

    Corning

    Corning® Vacuum Filter/Storage Bottle Systems are designed for filtering and storing cell culture media, biological fluids and other aqueous solutions. The systems consist of a 1000mL polystyrene receiver bottle and filter funnel with a 0.22 µm pore 54.5cm² cellulose nitrate membrane…

  • Sigma-Aldrich® vacuum filtration assembly

    MilliporeSigma

    for 47 mm filters with glass support, NS 40/35 joints, 4 L flask (included) Funnel volume is 1000 mL General description Same as Z290432 but with NS 40/35 jont (male on flask, female on funnel support) instead of rubber stopper. Vacuum filtration apparatus for HPLC solvent…

  • Vacuum Manifolds

    Porvair

    …directors, the universal robotic manifold can operate with many different brands of filter plates and collection trays.  Supplied with integral vacuum gauge, the manifold provides complete control of vacuum pressure ensuring plates are processed with high reproducibility.  The manifold…

  • XX1004708

    MilliporeSigma

    Designed for use with 1L and 4L vacuum filtering flasks and 47mm vacuum filter holder assemblies 100% Silicone Material Perforated, 1-hole accepts filter holder assemblies and tubing Pack of 5

  • EZ-Stream Vacuum Pump

    MilliporeSigma

    …EZ-Stream™ a cover protects the pump mechanism, and the assembly has been optimized to reduce the noise down to 60 dB. High vacuum performance Thanks to its innovative design, the EZ-Stream™ pump can provide vacuum up to 600-700 mbar, and because it transfers liquids through the…

  • Portable Rotary Vane Air Pump

    Gast

    …very good vacuum performance for labs on a budget. Cast iron rotor materials with phenolic fiber vanes. No oil bath, a self-lubricated oiler assembly is included. Standard equipment includes vacuum gauge, pressure gauge, needle valve regulators, oiler assembly, filter assembly, muffler,…

  • Corning® Vacuum Filter/Storage Bottle System

    Corning

    …square filter system with a Polyethersulfone (PES) membrane for mycoplasma removal. These new 1000mL Systems are designed for filtering and storing cell culture media, biological fluids and other aqueous solutions. The new system consists of a 1000mL polystyrene receiver bottle and filter funnel…

  • 47mm Glass Vacuum Holder Assemblies

    Advantec MFS

    …steel, or PTFE support Borosilicate glass filter holder assemblies for the microanalysis of liquids for biological or particulate contamination under vacuum. The 47mm holder is the standard size for microbiology and uses a 47mm filter membrane. The anodized aluminum clamp secures the…

  • Vacuum Pump Exhaust Filters

    vacuum pump exhaust Prevent oil accumulation in ductwork Recover expensive lubricating oils Eliminate potential OSHA and EPA violations High-efficiency filter cartridge continuously drains the collected liquids, allowing the user to recover lubricating fluid. Filter assemblies

  • Accessories for Vacuum Holder and Filtation Assemblies

    Advantec MFS

    …47mm Glass Vacuum Holder Assemblies, 47mm Glass Vacuum Holder - PTFE Seal, 90mm Glass Vacuum Holder Assemblies , and  47mm Stainless Steel Vacuum Holder , see 1177G36 and  1177G60 For accessories that work with  47mm Sterility Test Filter Holder ,…

  • Vacuum Pick Up System

    Electron Microscopy Sciences

    Vacuum Pick-up System complete set: Vacuum Generator Vacuum Pick-up System includes: Vacuum Pick-up System complete set: Vacuum Generator, Aluminum Vacuum Pen, Five Vacuum Tips, Set of seven Rubber Vacuum Cups (size ranging: 9/16", ½", 7/16", 3/8", 5/16", 1/4" and 3/16"), an In-line Filter,

  • Pump Exhaust Filter

    Labconco

    … Disposable filter removes oil mist and odor from vacuum pump exhaust May be exhausted into work area without ducting Includes filter assembly, one oil mist filter cartridge and one odor filter cartridge Oil mist filter cartridge life is approximately 1 year and odor filter cartridge life…

  • 47mm Sterility Test Filter Holder

    Advantec MFS

    …Borosilicate glass filter holder assembly for the microanalysis of liquids for biological or particulate contamination under vacuum. The Sterility Test holder is recommended for microbiological or sterility testing where ambient contamination must be eliminated. Complete assembly for sterility…

  • Oil Return Kit for Rotary Vane Vacuum Pump

    Labconco

    Returns oil from exhaust filter housing to pump. Needed when pump is run with the gas ballast open for extended periods of time. Includes: One (1) oil return assembly One (1) drain adaptor One (1) restrictor One (1) flexible oil-return tube Two (2) hose clips One (1)…

  • 25mm All-Glass Filtration Assemblies

    Advantec MFS

    Filter small volumes  Ground glass connection points Funnel, Base, and Flask Borosilicate glass filter holder assemblies for the microanalysis of liquids for biological or particulate contamination under vacuum. The All-Glass design restricts contact with reactive surfaces such as…

  • 47mm All-Glass Filtration Assemblies

    Advantec MFS

    … Funnel, Base, and Flask Sintered glass, Stainless steel, or PTFE filter support Borosilicate glass filter holder assemblies for the microanalysis of liquids for biological or particulate contamination under vacuum. The All-Glass design restricts contact with reactive surfaces such as…

  • 47mm Phase/Fraction Collector Filtration Assemblies

    Advantec MFS

    …stopper or 40/35 joint Sintered glass, Stainless steel, or PTFE filter support Borosilicate glass filter holder assemblies for the microanalysis of liquids for biological or particulate contamination under vacuum. The Phase/Fraction Collector was designed for applications that require…

  • Syringe Type Membrane Filters

    Thermo Scientific Nalgene

    Membrane filters enclosed in plastic housing with female Luer-Lok fitting on inlet for attachment to standard Luer-Lok-tip syringes. Male Luer-slip tip on outlet accepts standard needles. Usable for pressure or vacuum applications. Effective filtration area is 3.8 cm 2 . Offered in a choice of…

  • Autofil® PP Bottle-Top Filters for Solvent Filtration

    Foxx Life Sciences

    …world's first single piece polypropylene funnel, designed to withstand harsh solvents that would normally degrade traditional bottle-top filter assemblies. All active components are FDA-grade which makes Autofil® PP perfect for the extraction of compounds used in the food and drug industry. …

  • Graduated Filtering Flasks with Quick-Release Hose Barb Connectors

    Kimble

    KIMAX® heavy wall filter flasks have a quick-release connector designed as a safety feature Hose barb accommodates 1/4 inch ID tubing Tubing can remain permanently attached since the opposite end is designed to be easily assembled via a positive threaded seal Proper positioning of…

  • MEL/MF Total Coliform Laboratory

    Hach

    …analysis. Contains: Portable Incubator and rack, Thermometer, Whirlpak bags with thiosulfate (200), Filter funnel/pad assemblies (200), alcohol burner (order alcohol separately), vacuum filtration apparatus, colony counter, magnifier and permanent marker. Choose and order media separately.…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.