Vacuum Distillation

Compare Tool

Select up to 3 products

Vacuum Distillation
1 - 32 of 136
Sort
View
Show

United Sci Supplies

  • Synthware Vacuum Distilling Adapters

    Kemtech America

    With two standard taper inner joints that are parallel and at a 75 degree angle to the connecting tube. Distance between joints is 100mm.

  • SYNTHWARE Vacuum Jacketed Distillation Condensers

    Kemtech America

    Distillation Condenser, Vacuum Jacketed, Joints: 14/20 and 24/40 available, Jacket Height: 130mm and 250mm available, with 12mm ID indentations to support packing material **NOTE THESE PRODUCTS COME IN DIFFERENT SIZES - WHAT IS PICTURED MAY NOT BE THE ITEM SOLD**

  • SYNTHWARE Vacuum Jacketed Distilling Heads

    Kemtech America

    Distilling Head, Vacuum Jacketed Thermometer Joint: 10/18 Joints: 14/20 or 19/22 available For use with 25mm immersion thermometer.

  • Distillation Head, Vacuum Type

    Ace Glass

    Vacuum distillation head featuring glass or PTFE stopcock plugs which allow the receiver to be removed from the head without disturbing the refluxing solvent. All joints are 24/40 with the exception of a 10/18 thermometer joint which will accept our 5028-24 adapter and 6.4mm thermometers such as our…

  • Distillation Column, Vacuum jacketed

    Ace Glass

    Large distillation columns, jacketed with internal expansion bellows. Outer jacket baked out and evacutaed to 10-6 Torr. Columns are silvered internally with observation stripe. All columns are supplied with the proper number of bellows to withstand the 180 Deg C temperature differential at all…

  • PYREX Vacuum Distilling Adapter, with Extended Drip Tip

    Corning

    With outer Standard Taper joint at the top and an inner-sealed through drip-tip joint at the bottom Bent at 105° angle The serrated sidearm is 10 mm O.D. drip-tip at the bottom extends about 20 mm below the lower end of the joint

  • SYNTHWARE Short Path Vacuum Jacketed Distillation Apparatus

    Kemtech America

    …design for more efficiency. When a thermometer is inserted in the top of this apparatus, the bulb and stem serve as column packing. The close coupled condenser and vacuum connection offer and extremely short condensate travel path. Used with 25mm immersion thermometer, and D27 distillation receiver.

  • Synthware Distillation Adapters, Vacuum Jacketed

    Kemtech America

    Can be used as a distilling head to connect a condenser to the top of the distillation column. The 10/18 top joint accomadates a 76mm immersion thermometer.

  • Distilling Column, Vacuum Jacketed

    Chemglass

    Hemple style distilling column, vacuum jacketed to improve performance. Indentations on the inner tube support the packing material. All sizes have an I.D. of approximately 10mm.

  • Distilling Receiver, Vacuum Type

    Ace Glass

    With standard taper inner joint at bottom and outer joint at top. Graduated to 125mL in 1mL subdivisions.

  • Distilling Receiver, Vacuum Type

    Ace Glass

    With standard taper joint at top. Capacity 100mL, in 1mL subdivisions.

  • Distilling Head, Vacuum Type

    Ace Glass

    …stopcocks on manifold and reflux arms can be used to isolate head from receiver so that receiver contents can be removed without disturbing the vacuum in the system. With condenser on takeoff arm and 10/30 thermometer joint for 76mm immersion thermometer. Both column joint and receiver joint are…

  • Distilling Head, Vacuum Type

    Ace Glass

    …Stopcock manifold and reflux stopcock can be used to isolate head from receiver so that receiver contents can be removed without disturbing the vacuum in the system. Both column joint and receiver joints are 24/40. Thermometer joint is 10/30 for 76 mm immersion 8315 thermometer. Finger condenser…

  • SYNTHWARE Vacuum Jacketed Vigreux Distillation Heads

    Kemtech America

    Vacuum jacketed Vigreux distillation head having a sealed on condenser, braced for strength. Vacuum adapter has an inner joint and a sealed in drip tip. To be used with a 25mm immersion thermometer .

  • Heavy Wall Short Path Vacuum Jacketed Distillation Heads

    Across International

    The Ai heavy wall short path distillation head with vacuum jacket. Features Heavy wall for durability Boiling flask and distribution ports Vacuum jacketed Five sets of vigreux Thermo probe port: 14/20 joints Recirculating fluid ports: GL-16 adapters Glass material:…

  • SYNTHWARE Dean Stark Distillation Receivers with Vacuum Jacketed Uptake Tubes

    Kemtech America

    Similar to D451414-series but with the uptake tube vacuum jacketed to improve distillation performance. The jacket eliminates the possibility of condensation or recrystallization of distillate in the sidearm. With 2mm PTFE stopcock.

  • Buchi V-850 / V-855 Vacuum Controller

    Buchi

    …of the set vacuum to automatic distillation of complex mixtures. Eliminate bumping with evaporation applications by introducing precision control and avoiding overly aggressive ultimate vacuum settings. Pair with either a Buchi V-700/710 vacuum pump for hysteresis-free vacuum control or add…

  • 75° Connecting Distillation Adapters

    DWK Life Sciences (Kimble)

    Connecting 75 degree distillation adapters. For use as a component in atmospheric or vacuum distillations. Lower and sidearm joints are inner Standard Taper joints; upper joint is outer Standard Taper joint Joints are same size Manufactured from 33 expansion, low extractable…

  • Distillation Apparatus, Trap-to-Trap

    Ace Glass

    Used for the removal of solvents or other volatiles by vacuum distillation at ambient temperature. When used with Schlenk reaction Vessel, No. 7756, the trap prevents excessive loss of solution in the event of a bump. The distillate is collected in a No. 9477 pear shaped flask or other suitable…

  • Distillation Head, Vigruex, Jacketed

    Chemglass

    Vacuum jacketed Vigreux distillation head having a sealed on condenser, braced for strength. The top outer joint is for a 1” immersion 10/18 or 10/30 thermometer. Vacuum adapter has an inner joint and a sealed in drip tip. Condenser length is 100mm on the 14/20 size and 200mm on the 24/40 and…

  • Distillation Head, Micro, Vigruex, Jacketed

    Chemglass

    Similar to CG-1241 but with the Vigreux column vacuum jacketed to improve distillation performance.

  • Distillation Head, Micro, Vigruex

    Chemglass

    Distillation head with condenser sealed to a Vigreux column. Top thermometer joint is a 10/18 for use with a 1” immersion thermometer. Vacuum adapter has an outer joint and accepts a CG-1279-11 distribution adapter.

  • Distillation Apparatus, Short Path

    Ace Glass

    Designed for small quantities where holdup between flask and receiver must be minimized, but where it is also desired to measure vapor temperature with the accuracy of larger setups. Still body is available with or without vacuum jacket and with vigreu

  • Short Path Distillation Head

    United Scientific Supplies

    Short Path Distillation Head with 24/40 flask joints and 10/30 thermometer port. Distillation head is manufactured from high quality 3.3 borosilicate glass and features a condenser coil and three 1/4" hose nozzles, two for condenser and one for vacuum.

  • SYNTHWARE Micro Vigreux Distillation Head

    Kemtech America

    Distillation head with condenser sealed to a Vigreux column. Vacuum adapter has an outer joint and accepts a distribution adapter (D201414). To be used with a 25mm immersion thermometer.

  • 75° Connecting Distillation Adapters with BEVEL-SEAL™

    DWK Life Sciences (Kimble)

    Used in distillation assemblies where adjustable immersion depth of the thermometer is desired. Threaded top BEVEL-SEAL™ connection for plain stem thermometers Vacuum-tight seal is achieved with the open top compression cap and FKM o-ring BEVEL-SEAL™ cap 410119-1307 is…

  • Model 450 Vacuum Regulator

    DigiVac™

    …by applying DigiVac design and vacuum expertise to a proportional valve Super simple to use: just dial in your vacuum set point Utilizes downstream vacuum control which increases pump longevity Ideal for altitude simulation, distillations, composites research and Industrial vacuum processes

  • Synthware Vacuum Take-Off Adapters, Short Stem

    Kemtech America

    Synthware vacuum take-off adapter with drip tip. For use in vacuum distillation. Adapter is bent at 105 degrees. Serrated hose connection is attached to vacuum source. With standard taper top outer joint and lower inner joint of the same size.

  • DryFast Diaphragm Vacuum Pumps

    Welch

    …to operate and maintain Use Welch ® DryFast ® diaphragm vacuum pumps for tough applications requiring chemical resistance. DryFast’s Advanced Vapor Management controls vacuum for precise distillations using handy adjustment knob. Oil-free pumps are quiet and durable with PTFE…

  • RC6 Chemistry-HYBRID Vacuum Pump

    BrandTech®

    …RC6 Chemistry-HYBRID vacuum pump combines rotary vane and diaphragm vacuum pump technology to support freeze-drying, molecular distillation, and other applications in the fine vacuum range with dramatically reduced service demands. The RC6 can achieve an ultimate vacuum of 2x10-3 mbar with…

  • Glass Vacuum Adapters

    United Scientific Supplies

    Vacuum adapters have 24/40 joints. Bent adapter has a 105° angle between the top outer joint and bottom inner joint. Straight adapter has a top outer joint and bottom inner joint. Both adapters have 24/40 joints and include a 3/8" hose connector.

  • DuoSeal® High Vacuum Pumps

    Welch

    … Deep Vacuum to 10-4 torr Low RPM for cooler operation Address a wide variety of laboratory vacuum needs with these rugged oil-seal pumps. Use DuoSeal vacuum pumps for Schlenk drying manifolds, freeze drying, vacuum ovens, glove boxes, degassing, concentrations, distillations, and more.…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.