Vacuum Chamber

Compare Tool

Select up to 3 products

Vacuum Chamber
1 - 32 of 156
Sort
View
Show
  • Acrylic Vacuum Chambers

    Sapphire Cleanrooms

    Sapphire Vacuum Chambers are designed for vacuum testing, degassing small parts, defoaming, mixed liquids, biological tests and storing samples under sustained low and intermediate vacuums. Removable cover Front hinged door Vacuum gasket on door ensures airtight seal Supports vacuum

  • Vacuum Chambers

    Thermo Scientific Nalgene

    …cylindrical polyetherimide jar inverted on white polycarbonate base plate that has removable tubing adapter for connection to 1/4-inch i.d. vacuum tubing Vacuum rating 29 inches Hg @ 25°C Jar has amber cast and seals against Neoprene gasket in base Molded circular ridges on base help to…

  • Accommodates containers from 2 to 5 mL Clear Stoppering Chamber provides an economical means of stoppering serum bottles under original vacuum. Unit consists of a clear acrylic cylinder, stainless steel top plate, two 10-in. diameter shelves and a low voltage transformer with variable heat…

  • …place the lid on the chamber somewhat off center and still pull a full vacuum. This is a feature that most other vacuum chambers do not offer. The maximum allowed temperature of this chamber is 160f. The components of this chamber are rated at higher temperatures however as a vacuum vessel we limit…

  • …convection ovens. These units feature a radiant heating system that optimizes chamber space and provides excellent heat transfer and temperature uniformity. All SHEL LAB vacuum ovens are built with stainless steel chambers that are easy to clean and have exceptional durability. The doors on…

  • …place the lid on the chamber somewhat off center and still pull a full vacuum. This is a feature that most other vacuum chambers do not offer. The maximum allowed temperature of this chamber is 160f. The components of this chamber are rated at higher temperatures however as a vacuum vessel we limit…

  • …place the lid on the chamber somewhat off center and still pull a full vacuum. This is a feature that most other vacuum chambers do not offer. The maximum allowed temperature of this chamber is 160f. The components of this chamber are rated at higher temperatures however as a vacuum vessel we limit…

  • …place the lid on the chamber somewhat off center and still pull a full vacuum. This is a feature that most other vacuum chambers do not offer. The maximum allowed temperature of this chamber is 160f. The components of this chamber are rated at higher temperatures however as a vacuum vessel we limit…

  • …place the lid on the chamber somewhat off center and still pull a full vacuum. This is a feature that most other vacuum chambers do not offer. The maximum allowed temperature of this chamber is 160f. The components of this chamber are rated at higher temperatures however as a vacuum vessel we limit…

  • Vacuum Ovens

    Barnstead

    …heating while preserving usable chamber area Temperature is controlled by a hydraulic thermostat, while a built-in, high-limit thermostat prevents the oven from exceeding maximum temperature Solid aluminum shelves for optimal heat transfer to samples Vacuum levels are controlled between 2 and…

  • …for items up to 18” (45 cm) tall or wide including racks, trays and instruments, this Vacuum Desiccator provides for much more storage in a single chamber than traditional plastic or glass vacuum desiccator units. All contents can be easily viewed through the desiccator's clear…

  • …dry system while providing visibility into the chamber during bulk drying. Chambers are available in small and large sizes, with or without valves. Chambers include clear acrylic cylinder, 1/2” thick clear acrylic top and bottom lids, vacuum break valve, gaskets and electrical pass through…

  • Pump PCX420 115/230V

    Thermo Scientific Precision

  • A BINDER vacuum drying oven VD series gently dries materials with homogeneous temperature distribution. The patented expansion shelf technology from BINDER ensures optimal heat transfer. The shelves are easy to position where required and the inner chamber of the vacuum drying oven is easy to clean.…

  • Ideal for vacuum drying, degassing and teaching demonstrations, this vacuum chamber can withstand a full vacuum at room temperature. One piece O-ring seals the clear polycarbonate top to white polycarbonate base plate Polypropylene stopcock with Teflon® PTFE plug and tapered hose barb…

  • Hi-Temp Vacuum Ovens

    Thermo Scientific

    chamber working space and help eliminate potential hazards of open wire heaters Compression fittings on the side of the unit accept 6.4mm (0.25 in.) outer diameter hard tubing for pump and air connections Vacuum and air lines of corrosion-resistant stainless-steel tubing optimize chamber

  • Vacuum Chambers, Base Plate

    Thermo Scientific Nalgene

    White polycarbonate Plate is 13 1/2” x 1” thick, with three concentric Neoprene gaskets, 8”, 11 1/8” and 9” o.d. Gaskets lie in channels separated by concentric ridges which serve to center and to brace rim of bell jar.

  • …control and, thanks to the digital pressure control, the chamber load is not only dried at high speed but also extremely gently in our powerful and robust vacuum drying oven. Together with the speed-controlled vacuum pump, the vacuum oven VO forms an unbeatably energy-efficient duo. The pump…

  • Tubing kit for vacuum repl.Chamber

    Agilent Technologies

  • …LAB vacuum ovens are built with a stainless steel chamber for exceptional durability. Our double plenum design meets UL, CSA and EU safety requirements resulting in a cool outer surface. Our unique cross-flow ventilation forces inert gas to fill the entire chamber. To achieve required vacuum

  • Hollow plug, oblique bore stopcock is precision ground with corresponding numbers on barrel and plug. Lower vacuum chamber is evacuated via a separate hole in the plug which is not in the line of flow.

  • …place the lid on the chamber somewhat off center and still pull a full vacuum. This is a feature that most other vacuum chambers do not offer. The maximum allowed temperature of this chamber is 160f. The components of this chamber are rated at higher temperatures however as a vacuum vessel we limit…

  • Elite Series Vacuum Drying Ovens

    Across International

    The ELITE series digital vacuum ovens feature our 5-side chamber jacket heating system that covers left, right, up, down and backside of the chamber; all metal internal vacuum tubing (compare to rubber hose) for better vacuum levels and durability; and build-in secondary over-temp dial for enhanced…

  • 5 Gallon Aluminum Chamber

    Best Value Vacs

    …place the lid on the chamber somewhat off center and still pull a full vacuum. This is a feature that most other vacuum chambers do not offer. The maximum allowed temperature of this chamber is 160f. The components of this chamber are rated at higher temperatures however as a vacuum vessel we limit…

  • …If the vacuum level is higher than 5 mill bar for 30 minutes the vacuum pump will automatically turn off. Options include a purge valve for isolating the vacuum pump from the freeze dryer and built-in stainless steel mini vacuum drying chamber with control to +60°C. Vacuum pump with…

  • …includes true vacuum valves and has cross-flow ventilation within the oven chamber to enhance total performance. The vacuum oven is secured to a ruggedly constructed mobile stand to create a vacuum pump at the base. Although the oven is not supplied with a vacuum pump, all vacuum plumbing and KF25…

  • …from over-heating Tough Construction Outer case constructed of a tough steel construction Vacuum chamber is a robust, light alloy casting Spacious rectangular chamber with toughened glass viewing window and polycarbonate shatter-resistant safety screen Glass fiber insulation…

  • …Optional “heat boost” is 300 W of additionally controlled heat through the chamber. Quick-start™ one button start-up begins the rotor, heater, timers and vacuum pump. Quick-Stop system stops vacuum pump and rotor within seconds. The control panel displays program, temperature,…

  • …the Bulk Tray Dryer from the freeze dryer to shorten time necessary to reestablish working vacuum levels and to provide a means for determining end point. Samples must be pre-frozen. Freeze dryer, vacuum pump with displacement of at least 163 liters/minute, and freeze dry glassware (if not bulk…

  • … The installed purging valves are ideal for lowering oxygen and humidity levels. Other features include: Transfer chamber with purging valves and vacuum gauge.  Flat side access door for easily introducing larger equipment. Four (4) key cock valves for purging: Two on the…

  • 220°C (428°F) maximum temperature 0.44 cu. ft chamber volume 24-month warranty Radiant warm wall heating system provides optimal uniformity and conserves chamber space for drying, curing, vacuum embedding, and plating applications. Vacuum fittings require .25” (.6 cm) I.D. tubing. Model…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.