Vacuum Canister

Compare Tool

Select up to 3 products

Vacuum Canister
1 - 25 of 25
Sort
View
Show
  • Dual Canister Sampling Manifold

    Restek

    …between two canisters. Use of a single flow controller eliminates flow rate variability, as well as environmental variables common with collocated samples. The DCSM may also be used with two flow controllers to monitor individual canister vacuum. Duplicate sampling with all canister sizes…

  • Bio-Cane Canister & Cane Cryogenic Systems

    Thermo Scientific

    …LN2. Each vessel includes six canisters to handle any combination of cryogenic vials, tubes or sample containers. Super vacuum insulation and durable construction make for years of trouble-free service. 1233X22 / X23 / X24 have a color coded canister system for quick identification.…

  • Medi-Vac® Brand Guardian™ Suction Canisters

    Cardinal Health

    Our disposable hard canister systems are available in a variety of sizes for almost any suction procedure. An automatic overflow shutoff valve is located inside the lid to help prevent cross contamination of regulators and wall vacuum outlets, and 90° adapters allow tubing to connect at right angles…

  • TO-Can Air Sampling Canisters with RAVE Valve

    Restek

    …the canister without welds and protects the canister, tube stub, and valve. The 2/3-turn diaphragm valve has a metal-to-metal seat and a temperature limit of 250 °C. Each canister is slightly pressurized with contaminant-free nitrogen prior to shipment. Dimensions/Weights of Air Canisters

  • SilcoCan Air Sampling Canisters with RAVE Valve

    Restek

    …available, in both the 2-port and 3-port configurations. Each canister is slightly pressurized with contaminant-free nitrogen prior to shipment. Whether you are sampling for TO-14A, TO-15, or reactive sulfur compounds, SilcoCan canisters are your best choice for inertness. In Tedlar bags, the…

  • Replacement Combination Vacuum/Pressure Gauges

    Restek

    2-inch vacuum/pressure gauges, 316 stainless steel with 1/8" NPT fitting and center back mount. Recommended for use with canisters.

  • CentriVap Acid-Resistant System

    Labconco

    The CentriVap Vacuum Concentration System includes the following components: Acid-Resistant Benchtop Vacuum Concentrator with Glass Lid 7810016; Cold Trap 7811020; Clear Canister 7460900; Acid Insert 7814800; 12-13 mm Acid-Resistant Rotor 7455101; Glass Trap 7397605; and Vacuum Tubing and 6 Clamps.

  • CentriVap Acid-Resistant System 115V/60Hz

    Labconco

    The CentriVap Vacuum Concentration System includes the following components: Acid-Resistant Benchtop Vacuum Concentrator with Glass Lid, Cold Trap, Clear Canister, Acid Insert, 12-13 mm Acid-Resistant Rotor, Glass Trap, and Vacuum Tubing and 6 Clamps.

  • Ashcroft Test Gauges

    Restek

    …in canisters before and after sampling. The 6-inch face on the analog gauge allows for easy reading. The digital gauge operates on two AAA batteries and offers an unambiguous readout. Both gauges have an accuracy of +/– 0.25% and all-metal wetted parts. Accurate measurement of vacuum to…

  • Centrivap Concentrator Systems

    Labconco

    …of the components necessary to begin operation except for the vacuum pump, which is sold separately. Each system includes a benchtop concentrator, cold trap, clear canister, 12-13 mm rotor, vacuum tubing, 6 clamps and the appropriate trap insert. (See Thomas Numbers 4366R20 - R25 for vacuum pumps.)

  • Centrivap Concentrator Systems

    Labconco

    …catalog number. Just add a vacuum pump and you will be ready to concentrate your samples! CentriVap Solvent Systems are for concentrating organic solvents. They include a Benchtop Concentrator with Glass Lid, Glass Lid Cold Trap, Clear Canister, Solvent Insert, 12-13 mm Rotor and Vacuum Tubing.

  • Integrated Passive Air Sampling Kits

    Restek

    …finish. The stainless steel kit is ideal to partner with the Restek TO-Can air sampling canister for TO-14A and TO-15 methods. Use the Siltek-treated version with the Restek SilcoCan air sampling canister when collecting low-level volatile sulfur compounds or other active compounds. Provide…

  • Soil Gas Passive Air Sampling Kits

    Restek

    …incorporates a vacuum gauge and 2 µm frit filter. The 1/4" compression inlet and outlet allows easy connection to the canister valve and also to the tubing from the sample port. Several orifice sizes provide sampling times from 4 minutes to 10 hours on a 6 L canister. Individual…

  • High-Capacity Cryogenic Refrigerators

    Worthington Industries

    …(-184°C) under the closed necktube core. The HC Series versatile storage system features a convenient canister index location ring and internal spider. The unit offers superior vacuum performance with super insulation providing maximum holding times. Its ribbed, high strength aluminum body…

  • Cryogenic Refrigerators

    Worthington Industries

    …strength aluminum body with a magniformed necktube design and a versatile storage system with a convenient canister index location ring and internal spider. The unit features superior vacuum performance with super insulation providing maximum holding times. A low level alarm is available for…

  • FreeZone® Freeze Dryers Miscellaenous Accessories

    Labconco

    …& 8-port manifolds, Clear Chambers, Heated Product Shelves. Chemical Trap Canister, 3/4" (1176B61) Clear polypropylene canister allows visual inspection of trap contents. Clear Polypropylene Canister with Stand accommodates any of the following trap inserts (sold separately): Acid…

  • Miniature Air Sampling Kits

    Restek

    …orifice, 2 µm frit filter, vacuum gauge, and sample inlet. The gauge and sample inlet are downsized for use with smaller canisters. Provide accurate integrated sampling without a sampling pump Convenient smaller size connects easily to miniature canisters Available in stainless…

  • Liquid Nitrogen Storage Vessels

    International Cryogenics

    …durability and the thermal barrier, advanced insulation and vacuum provide optimum thermal efficiency. An optional universal roller base is available to aid in moving containers. NOTE: Storage canisters are not included. For canisters, please see Thomas part number 5149E77 — 5149E83 …

  • Liquid Nitrogen Refrigerators

    International Cryogenics

    …allows the use of canisters that hold 30-40% more material. A high strength aluminum shell provides durability. Thermal barrier, advanced insulation and vacuum provide optimum thermal efficiency. There is also a slotted, numbered indexing handle assembly. Specimen storage canisters are provided with…

  • Nitrogen Dry Box

    Plas-Labs

    …lightweight. The design makes is easily moveable from lab to lab. The box features two vacuum pressure pumps, one each for transfer chamber and drying train. The train includes polycarbonate canisters containing DesiSphere™. Other features include a formed one-piece clear acrylic top…

  • Controlled Atmosphere Chamber

    Plas-Labs

    …change the drying train without disturbing the internal atmosphers. The box features two vacuum pressure pumps, one each for transfer chamber and drying train. The train includes polycarbonate canisters containing DesiSphere™. Other features include a formed one-piece clear acrylic top…

  • Temperature & Humidity Controlled Glove Boxes

    Plas-Labs

    canisters Password protected, configurable PID control Nebulizer One touch, on-screen datalogging Main chamber formed of one piece clear acrylic material This glove box accurately maintains temperature and humidity (Rh) inside a roomy, single station glove box.  Unit includes: vacuum

  • Liquid Nitrogen Shipping Vessels

    International Cryogenics

    …insulation and vacuum yield optimum thermal efficiency. Vapor shippers are built with material that absorbs liquid nitrogen and leaves only the vapor phase. Shippers have slotted and numbered indexing ring and strong necktubes; they make outstanding biological shippers. Includes: canister, vapor…

  • MiniSampler

    Bürkle

    …sampling, max. suction height 5 m MiniSampler PE Ideal for general sampling from barrels, canisters, tanks etc. MiniSampler PE complete with accessories in transport case, contents: Vacuum pump, 10 PE bottles, 100 ml, 10 m PE suction hose 6 x 8 mm, 1 hose cutter, 1 stainless steel hose…

  • Alicat M-Series Flow Calibrators

    Restek

    Quickly and precisely verify flow rates generated by vacuum or pressure before going into the field. These compact, convenient units are ideal for real-time calibration of air flow controllers, passive sampling kits, air canisters, sampling pumps, and more. They measure absolute pressure, mass flow,…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.