Ultrapure Water Purification System

Compare Tool

Select up to 3 products

Ultrapure Water Purification System
1 - 32 of 41
Sort
View
Show

MilliporeSigma

  • …the water purification system, ultrapure polishing cartridge, sterile 0.2 micron final filter, uv lamp, and all necessary tubing to connect incoming feed water supply MicroPure UV-ST Package* Includes: the water purification system, built-in 6L feed water reservoir, ultrapure polishing…

  • …BT System produces both RO-purified and Type I water packaged in a compact all-inone benchtop design For laboratories needing 1-10 liters per day, the WaterPro BT System, delivers ultrapure Type I*, up to 18.2 megohm-cm at a typical rate of >0.5 liter per minute** at inlet water temperature…

  • In addition to featuring highly efficient purification components, such as active carbon and highly effective ion exchange resin, the arium® pro UF ultrapure water system additionally includes a hollow-fiber ultrafilter. This ultrafilter uses crossflow technology to reliably remove endotoxins,…

  • All-in-one system: Produces pure (Type 3) water at 3 L/hour and ultrapure (Type 1) water at 0.5L/min, directly from potable tap water. Direct-Q® systems deliver both pure and ultrapure water directly from tap for use with a wide variety of applications in your lab. Direct-Q® systems

  • …third purification stage is performed using a Sartopore® final filter, which is connected directly at the point of use and removes particles and bacteria. The arium® pro offers an even more affordable alternative. Reduced to the essential features, it produces ultrapure water –…

  • ultrapure water. Moreover, this compact laboratory-grade water purification system stands out by virtue of its superior reliability and user-friendliness. Reliable To ensure that you always obtain reliable and reproducible results, the closed tank system guarantees consistently high water

  • GenPure X-Cad Plus

    Barnstead

    All GenPure systems exceed international standards ASTM Type I, ISO 3696 Grade 1, ASTM D1193 and CLSI-CLRW. xCAD remote dispenser xCAD is short for “Extended Control and Dispenser” The system provides more flexibility for ultrapure water dispensing with an action radius of 32 inches (80cm) …

  • …60/100 litres Puro is suitable for Type 3/ RO water usage of 10-1000 litres per day. RO water is suitable for feeding glass-washers, autoclaves, steam generators and stability chambers, also to feed ultrapure water systems such as Alto. The integral boost pump simplifies…

  • …cartridges for Millipore® Water Systems High quality resins Guaranteed performance Economically priced Why buy expensive cartridges when these high quality, inexpensive alternatives are available! PUREpack™ cartridges are guaranteed to provide ultrapure water to meet your needs for less…

  • …unit and delivers ultrapure water that exceeds the ASTM Type 1 quality standard. High performance capacity thanks to efficient ion exchange resins Fast and effective adsorption of impurities through high-grade activated carbon Best ion removal delivers ultrapure water that exceeds the…

  • …the system and start-up consumables. Deliver ultrapure 18.2 megohm water from tap water with consistent quality, outstanding flexibility and great savings. Smart2Pure UV 3LPH Package Includes: the Water Purification System, Built in 6L Reservoir, Built in Pressure Regulator, Ultrapure

  • Micropure Systems

    Barnstead

    … Variable speed dispensing Optional integrated 6L feed water reservoir so you can place the system without direct access to a water line Monitor feed water quality Good feed water quality leads to consistently ultrapure water and a longer cartridge service life to maximize cartridge…

  • …allows production of ultrapure water next to or near the analytical equipment, minimizing risk of water contamination. Overall dimensions (W x D x H): 12 1/4” W x 18 3/4” D x 18 1/8” (31.1 x 47.6 x 46.0 cm) Pretreatment for end use reagent grade systems such as EASYpure® Flow…

  • …DI is a highly efficient water treatment system and the ultrapure water quality exceeds the ASTM Type 1 quality standard. Water is purified by a three-stage process. In the first two stages, both organic and inorganic components are removed reliably from the feed water by using the specially…

  • This high-end unit delivers ultrapure water of the highest quality and combines the purification technology of the arium® pro UF and pro UV units all into one system. The integrated, horizontal UV lamp (185 254 mm), together with a hollow-fiber ultrafilter, not only prevents microbial…

  • …Pro system is a compact system which converts tap water to into ASTM Type 1. The Smart2Pure Pro UV/UF 16 LPH offers the choice of a 30 L or 60 L reservoir for customizable storage capacity and ability to dispense both ASTM Type 1 and Type II water. Lasting economy: Water purification

  • GenPure Systems

    Barnstead

    All GenPure systems exceed international standard ASTM Type I, ISO 3696 Grade 1, ASTM D1193 and CLSI-CLRW Integrated feed water monitoring An additional measuring cell monitors feed water conductivity. Any exceeding of the limiting value is immediately displayed maximizing cartridge…

  • RO Water Systems

    Barnstead

    …osmosis system provides a source of purified water for general lab use such as glassware washing or as feed water to our ultrapure water systems such as the Nanopure and Easypure II. The Barnstead RO system is easy to operate and simple to maintain. It utilizes multiple purification steps, including…

  • …lab water system is an ideal choice for users who need up to 20 liters of ultrapure water or RO water per day. Quality of ultrapure product water meets or exceeds ASTM, CLSI, CAP, and ISO Type I water standards. The compact system provides an easy way to produce ultrapure water and RO water

  • …two water qualities within one easy to use system - Types 1 & 2. The system is fed from mains water and produces Type 2 - DI water into a reservoir size of your choice. Choose a Type 2 production rate to suit your requirements, 10 or 20 liters per hour. Type 1, Ultrapure water at 18.2…

  • …compounds to a TOC value of ≤ 2 ppb. Perfectly matched to support photooxidation technology, the Analytical Kit cartridges optimize water purification and specifically remove inorganic and organic substances. The current TOC values are continuously measured by the optionally integrated…

  • The arium® mini essential is directly connected to a pretreated (DI/RO/EDI) centralized or decentralized feed water supply. Due to its slim design (28 cm), the system saves a lot of space and can be installed almost anywhere in the lab. Due to the optional built-in UV lamp and the…

  • …provides ultrapure water on demand. The Alto systems are fed from a pre-treated supply (Puro, Geno or your existing ring main) and produce ultrapure water at 18.2 MΩ-cm, Type 1 swiftly on demand.  The integrated dispenser or optional remote dispenser can provide ultrapure water at up to 2…

  • ARIES High Purity Water System

    Aries FilterWorks

    …ARIES High Purity Water System provides 4.0 liters per minute* of 18.2 megohm water. A quiet recirculation pump ensures constant water purity. Standard equipment includes a built-in pressure regulator and a 0.2 micron final filter to remove bacteria. Water quality meets or exceeds ASTM Type I water

  • Accessories and consumable items for the EASYpure® RoDi System. Note: Products listed here are accessory items and are not meant to be representative of the system itself. The kit includes: Pre-filter Ultrapure mixed bed cartridge High purity/low TOC cartridge RO…

  • MixMulti, 120V

    Barnstead

    The Barnstead LabTower EDI system delivers up to 200L/day of Type 1 ultrapure water (18.2 megohm) or Type 2 pure water (10-15 megohm) from a tap feed water supply. Water product quality exceeds international standards ASTM Type 1 with a resistivity of 18.2 megohm and TOC 1-5ppb with optional…

  • …allows purification directly from PCR reactions or agarose gel slices Purify DNA fragments or PCR products in as little as 15 minutes No phenol extraction or ethanol precipitation required Membrane-based system, which can bind up to 40µg of DNA DNA is then eluted in Nuclease-free Water

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.