Tubing Tees

Compare Tool

Select up to 3 products

Tubing Tees
1 - 32 of 36
Sort
View
Show
  • Connect fractional tubing Available in brass or stainless steel

  • T Connector Tubing Adapters

    Foxx Life Sciences

    Foxx Life Sciences T connectors are available in a variety of standard sizes. Our NPT threaded and barbed tees offer strength and durability. Made from Polyethylene.

  • These multiport connectors are designed to maintain a secure joining of tubing or other fluid pathway components in mid- to high-pressure applications.

  • PFA Tee compression fittings are ideally suited for use in corrosive environments and chemical applications. The fitting design yields a leak-tight connection and requires no special tools to assemble. The connection is achieved by merely inserting the tubing into the fitting assembly and tightening…

  • Low-Pressure Y Connector Assemblies

    IDEX Health & Science

    …connectors in a variety of low-pressure situations throughout your fluidic system. Y connectors create less turbulence and solvent outgassing than Tee connectors, improving analytical results. Handy mounting holes make it a snap to mount connectors. Y connector assemblies come complete with nuts and…

  • Low-Pressure Tee Assemblies

    IDEX Health & Science

    Use Tee connectors in a variety of low-pressure situations throughout your fluidic system. Handy mounting holes make it a snap to mount connectors. Tee connector assemblies come complete with nuts and ferrules.

  • Glass standard taper joint adapters featuring a drip tip and right angle tee ground glass tube sidearms. The sidearms are used to make tube compression fitting connections to a wide variety of flexible and rigid tubing using our 12709,12711,12715 & 12716 product families of fittings.

  • Inert Tee, 1/16 inch SS Tube OD

    Agilent Technologies

  • Tee, Air Sampling

    Ace Glass

    Sampling tee with top threaded, side and bottom tubes reduced for use with 7506 bushing.

  • Process pipe straight tee.

  • Connect various types of tubing with low dead volume Use with 1 to 4 mm OD tubing Quickly and easily connect semi-rigid tubing such as PTFE, ETFE, and FEP as well as rigid materials such as glass, PEEK, and stainless steel. Use the interchangeable components to create chemically inert…

  • Ideal for quickly and reliably connecting PEEK tubing in HPLC systems One-piece, finger-tight fittings—no ferrules required Low dead volume Included end fittings and body made of biocompatible PEEK Available in 0.25, 0.50, and 0.75 mm bore sizes Maximum temperature: 100°C …

  • Premium quality stainless steel KF/NW25 3-way tee flange for secure vacuum connection. Now you can hook up multiply vacuum ovens to one pump, or multiply pumps to one oven to draw a faster and deeper vacuum. Compatible with the following products from Across International: Vacuum ovens…

  • This kit contains the tubing and fittings needed to add an additional GC to your lab bench. Kit includes: tubing cutter, one 1/8-inch x 1/4-inch reamer, one 1/4-inch x 1/8-inch brass tube end reducer, one 7/16-inch wrench, one 1/2-inch wrench, four 1/8-inch brass tees, ten 1/8-inch brass nuts, ten…

  • Tube, Tee to Pressure PCA

    Agilent Technologies

  • Glass standard taper and spherical joint adapters featuring right angle tee ground glass sidearms. The sidearms are used to make tube compression fitting connections to a wide variety of flexible and rigid tubing using our 12709,12711,12715 & 12716 product families of fittings.

  • Available in brass or stainless steel

  • Suitable for glass lined tubing (GLT™), metal and plastic tubing Non-swaging fittings that will not deform tubing Easy to remove tubing no back ferrule required

  • GLT™ exhibits excellent resistance to the harshest of conditions.  Maximum temperature for continuous use of GLT is 500°C.

  • Valco fittings have been designed for the specific demands of instrumentation and manufactured with the tight tolerances and premium quality that analysts require. Connect three lines. 300 series stainless steel; stainless steel ferrules included. For 1/16" OD tubing.

  • The tubing, made of PFA, has an inner diameter of 0.8 mm and an outer diameter of 1.6 mm. Its length is 91.5 cm. The assembly includes a barbed tee fitting and a 1.6 mm fangless connector.>/p>

  • Description - Quantity 1/8"""" Tubing x 50 foot coil Copper Special Cleaning- 1 1/8"""" Compression Brass Tee Two Piece Ferrule Brass- 3 Tee 1/8"""" Com x 1/8"""" Comp x 1/4"""" fnpt Brass- 3 Adjustable Safety Relief Valve Brass 50 - 150 PSI- 3 1/4"""" fnpt x 1/8"""" Comp Fitting Brass- 3 1/8""""…

  • Use an in-line pressure gauge to indicate when a thermal gas purifier getter tube should be replaced Includes 1/8" tee and 0–100 psi (0-689 kPa) gauge

  • …Qty. 1 PFA Nebulizer with Threaded Connector PharMed ® Pump Tubing (Double Grey Marked), Qty. 4 Flanged PTFE Drain Tubing (Double Grey Marked), 1 m 0.25 mm I.D. Sampling Tubing, 1 m 0.15 mm I.D. Sampling Tubing, 1 m Tee Connector for Mixing Oxygen and Make-Up Gas, 50 cm Make-Up Gas Line…

  • …Sampling Tubing, 1 m (N8122384) 0.25 mm I.D. Sampling Tubing, 1 m (N8122383) 0.5 mm I.D. Sampling Tubing, 1 m (N8122382) Tee Connector for Mixing Oxygen and Make-Up Gas, 50 cm Make-Up Gas Line and Fittings, 80 cm Oxygen Gas Line and Fittings (N0777556) PharMed ® Peristaltic Pump Tubing (Double…

  • …Qty. 1 PFA Nebulizer with Threaded Connector PharMed ® Pump Tubing (Double Grey Marked), Qty. 4 Flanged PTFE Drain Tubing (Double Grey Marked), 1 meter 0.25 mm I.D. Sampling Tubing, 1 m 0.15 mm I.D. Sampling Tubing , 1 m Tee Connector for Mixing Oxygen and Make-Up Gas, 50 cm Make-Up Gas Line…

  • Tubing, 1 m (N8122382) 0.25 mm I.D. PFA Sampling Tubing, 1 m (N8122383) 0.5 mm I.D. PFA Sampling Tubing, 1 m (N8122384) Tee Connector for Mixing Oxygen and Make-Up Gas, 50 cm Make-Up Gas Line and Fittings, 80 cm Oxygen Gas Line and Fittings (N0777556) Santoprene ™ Peristaltic Pump Tubing

  • …Spray Chamber (N8145402) PFA-ST MicroFlow Nebulizer (N8122192) 0.15 mm I.D. ST Sampling Tubing, 1 m (N8122382) 0.25 mm I.D. ST Sampling Tubing, 1 m (N8122383) 0.5 mm I.D. ST Sampling Tubing, 1 m (N8122384) Tee Connector for Mixing Oxygen and Make-Up Gas, 50 cm Make-Up Gas Line and Fittings, 80…

  • Process pipe reducing tee.

  • Nuts, Front and Back Ferrule Sets

    Agilent Technologies

    …1/8 in. plugs, brass Six 1/4 in. plugs, brass Two 1/8 in. unions, brass Two 1/4 in. unions, brass Two 1/8 in. tees, brass Two 1/4 in. tees, brass Two 1/8 x 1/4 in. reducing unions, brass Two 1/4 in. (A) x 1/8 in. (B) reducers, brass Two 1/8 in. (A) x…

  • Glass adapter with two end 15mm o-ring joints and a #15 Ace-Safe connector side port. Ideal for connecting components for Schlenk lines Made mainly for connecting the Shlenk or vacuum line to a vacuum gauge Ace Safe has 1/2-in ID hose connection for connecting vacuum tubing.

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.