Tubing Cut

Compare Tool

Select up to 3 products

Tubing Cut
1 - 32 of 283
Sort
View
Show
  • Ideal for cutting 1/16-inch tubing Cuts quickly, reducing distortion Perfect for quick cuts for non-critical applications or in "hard to get at" places After cutting, it is recommended that the dressing tool, cat.# 20188, be used to remove any burrs and to ream the tubing to a…

  • Cuts 1/16", 1/8", or 1/4" tubing with inside diameter as small as 0.008" Electrically operated bench-top model Handy 1/16" dressing tool (included) on the swing arm removes burrs and reams tubing Voltage selectable 110–120/220–240 volts, 50–60 Hz.*…

  • …Laser Cutting Fully-automated heat sealing and laser tube cutting system Designed for SAFE® tube racks Aluminium foil allows storage at temperatures down to at least –80°C Laser cutting for 96 tubes, in single rows or columns only Customisation of applications and cut

  • Burr-free, perpendicular cuts that will not distort the tubing OD or close the ID Use on PEEK, PTFE, Tefzel, and other polymeric tubing

  • Cryoflex Tubing

    Thermo Scientific Nunc

    Heat-Shrink Tubing Safely encapsulates tube Easy to apply and remove Recommended when CryoTube® vials are to be used to store all samples for liquid nitrogen or ultra-low temperature cabinets. Polyethylene sleeves 14 mm id x 500 mm long. Cut to fit individual tubes or for use as…

  • PEEK Tubing

    MilliporeSigma

    …steel tubing in various places in the HPLC system. It is especially useful when contact between the sample and metal components must be avoided, such as when working with metal complexing agents or certain biochemical compounds. PEEK tubing also offers other advantages: it is flexible, easy to cut,

  • PEEK Tubing

    Agilent Technologies

    Flexible and easy to cut to desired lengths Color-coded for easy tracking Accepts both stainless and PEEK fittings 1/16" OD

  • Tubing Cutter

    Dynalon

    Product Dimensions (l x w x h) : 3x1x1in Edges cut with the hose cutter are always clean and flat,  even in the case of thick hoses.

  • Produces square, smooth cuts in 1/16-inch tubing Eliminates tubing distortion Cuts hard or soft copper, aluminum, brass, stainless steel, Monel alloy, or titanium Replaceable cutting wheel

  • Cutting wheel for cutting 1/16" and 1/8" stainless steel tubing Clean, right angle cuts with minimal burring or chipping of the tubing No additional reaming or deburring is required Spare cutting wheels are available

  • Excellent for cutting 1/8- or 1/4-inch metal tubing* Compact size is ideal for tight spaces Replaceable cutting wheel *Not for use with stainless steel tubing.

  • Specifically designed to cut 1/8" to 1-1/8" (4 mm to 28 mm) OD tubing. Easily cuts stainless steel, Monel alloy, and other hard-temper materials. Unique design makes clean, right-angle cuts and eliminates spiraling. Integral reamer folds away for safety and convenience. …

  • Produces a straight, clean cut every time! This handheld tubing cutter is ideal for portable rugged use.

  • Restek tubing is manufactured from fine, chromatographic-grade 316 stainless steel. It is corrosion resistant, ultrasonically cleaned, and passivated. We polish the tubing and promise a burr-free cut. You can use this tubing immediately—there is no need for additional treatment.

  • Portable, pocket-sized cutter cuts flexible tubing from 1.6mm to 19mm (1/16 to 3/4") O.D. Spring-loaded jaw will remain closed for safety when not in use Replaceable, hardened steel blade makes clean, straight cuts

  • Alphanumeric grid for better identification Flexible plate for better fitting of tubes in thermal block Can be cut to desired format Corner is cut away to facilitate orientation of plate Inside of tube is smooth and has an inert surface These 48-well PCR plates are thin-walled…

  • Attaches to laboratory table tops up to 1-3/4" (45mm) thick. Cuts glass tubing up to 1-1/2" (38mm) diameter. Aluminum alloy casting with gray hammerloid finish. Hardened steel cutting wheel.

  • PEEK (Polyetheretherketone) Tubing

    IDEX Health & Science

    An excellent replacement for stainless steel tubing Flexible PEEK tubing is biocompatible and chemically inert Easily cut to desired lengths Smooth internal surface decreases turbulence Color-coded for easier identification

  • Made of nickel-plated zinc alloy, with hardened steel cutting wheels Spring-loaded, to remain open until used For tubes up to 38 mm diameter

  • …non-reinforced tubing Double-wall tubing with polyester braid between inner and outer PVC sheaths Meets FDA, 3-A and NSF criteria Clear wall for visualization of flow Compatible with virtually all non-solvent chemicals Braid is not completely embedded; cut ends should be…

  • Fused Silica Tubing Cutters

    Agilent Technologies

    Conveniently designed, pencil-shaped tool and a ceramic wafer that allow you to make clean and easy cuts in fused silica, glass and aluminum-clad capillary columns.

  • Rigid Capillary Tubing

    Agilent Technologies

    Squarely cut, pre-cleaned and ready to use Use with stainless steel fittings and ferrules or PEEK fittings This product is only available to U.S. Domestic Customers.

  • Medium Tubing 1.75" X 0.09" X 48.25"

    DWK Life Sciences (Kimble)

    33 expansion borosilicate glass tubing with cut ends. Medium wall precision bore tubing Tubing has a low coefficient of expansion and a high resistance to chemical attack Conforming to USP Type I and ASTM E438, Type I, Class A requirements

  • …system tubing as part of your troubleshooting or want to reduce the dwell volume of your system as you move to narrower columns, Restek has the quality tubing in the lengths and IDs you need. Each ID is color coded, so it is easy to identify and replace correctly. Tubing is precision cut, resulting…

  • …leaks. Stays flexible with routine exposure to gasoline, kerosene, heating oils, cutting compounds and glycol based coolants. Tubing is resistant to the swelling and hardening. Tubing measurements in listings are i.d x o.d x wall thickness in inches. Tubing is supplied in 50’ (15.2 m) rolls.

  • This PYREX® special wall tubing has an O.D. of 9mm and wall thickness of 2.0mm. It is 1219mm (48") long, ± approximately 6mm (¼") with ends cut and glazed or fire polished.

  • Tubing 6mm X 36" Silicone

    DWK Life Sciences (Wheaton)

    Syringe feed tubing made of long lasting medical quality silicone Available in various length, cut or uncut Autoclavable at 121°C / 250°F

  • DASH Apex 6 Set & Lock STAT Centrifuge

    labForce® (a Thomas Scientific Brand)

    …an array can fit on any table top area, including your accessioning station, so tubes can be spun immediately as they are received. Spin six tubes up to 75-100 mm (3-10 mL) right out of the box. Rotor, universal tube holders, and 2-year warranty (lifetime on rotor) are included. Max speed 4,000…

  • …for Type 1A glass 4 to 32mm O.D. sizes are 1219mm long ± approximately 6mm. 4mm O.D. have ends cut, while 5 to 32mm sizes have ends fire polished. 35 to 178mm O.D. sizes are 1226mm long ± approximately 6mm. 35mm have ends cut only. 38 to 51mm sizes have trimmed and glazed ends.

  • …test mix includes test chromatogram. 5-meter banded sections mounted in a Restek cage. Maximum temperature: 325°C Note: 30- and 60-meter lengths are banded in 5-meter sections. Recommendation: Cut 60m guard columns into shorter lengths. Using full length may cause peak distortion.

  • Small size ceramic grinding cylinder with angle-cut ends for use with standard 5 or 15 mL centrifuge tubes. NOTE: These products are only available for sale to Domestic U.S. Customers.

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.