Tubing Condenser

Compare Tool

Select up to 3 products

Tubing Condenser
1 - 32 of 289
Sort
View
Show
  • Graham Condensers

    United Scientific Supplies

    Graham condenser is designed for use in distillation applications. Constructed of borosilicate glass, this condenser has a coiled inner tube to provide additional surface area for highly efficient cooling. Socket is 24/40 with a screw thread connector.

  • Tygon® S3™ E-3603 Laboratory Tubing

    DWK Life Sciences (Kimble)

    This tubing is used for drain, vent, and general laboratory applications, and is specially formulated for resistance to flex-fatigue and abrasion. It has heavy walls to withstand a full vacuum, and may be used on a variety of glassware including filter flasks, condensers, and distillation adapters. …

  • This PYREX® general purpose condenser can be used for either distillation or extraction. Although the condensing area per unit length of the 200mm long jacket is low, the large capacity water jacket gives efficient cooling. Condenser tubulations are approximately 10mm O.D. The adapter end is…

  • Borosil® Double Surface Condensers have a water jacket on the outside and through the center of the condensing tube. This is used when the liquid is very unstable like alcohol, aromatics, essential oils, petroleum products, distilling ethers, etc. These condensers are widely used throughout…

  • Graham Condensers

    GSC International, Inc.

    The Graham Condenser has a coiled inner tube to allow a greater surface for coiling and condensation. Made from heat resistant borosilicate glass. The inner coil is sealed to the outer coil producing a leak proof unit.

  • …bulbs which increase condensing area and lengthen condensate path Inlet and outlet tubes are on opposite sides of the jacket All sizes take stopper size 3 and have Standard Taper drip tip joint at bottom and Standard Taper outer joint at top. A widely used condenser with greater surface…

  • Rotary Evaporator Condenser, Vertical Double coil condenser for use with Heidolph rotary evaporators Top Joint: 19/38, Spherical Joint: 35/20 ball and Inlet Feed Tube

  • MTS Cluster Tube Caps, Polypropylene, 8-CapStrip, Natural 1 Bag of 120 Strips/pk 600/case Lids, with individual condensation rings above each Tube, prevent cross-contamination

  • Friedrichs condenser similar to CG-1210 but with detachable hose connections. Connections are made of polypropylene and provide a safe and easy way of connecting and disconnecting flexible tubing to the condenser. Hose connections have an O.D. of 8mm and an I.D. of 4mm. Supplied complete with two…

  • …Hose connections are on the bottom of the condenser which makes it easier to connect hose/tubing. Connections are GL14 polypropylene hose barbs and screw caps. GL hose connections provide a safe and easy way of connecting flexible tubing to a condenser. Jacket has a O.D. of 41mm while the coil O.D.…

  • Condensers

    GSC International, Inc.

    …Our Hemple Condenser is made from high-quality borosilicate glass and has a 300mm long condensing column. Our Liebig Condensers are made from high-quality borosilicate glass and have a straight sealed inner tube and two inlet/outlet arms. These condensers have a 300mm long condensing column and…

  • … Dry ice condenser for distilling low-boiling solvents. The solvent to be distilled can be continuously fed in through the PTFE inlet tube. Cooling by dry ice, no cooling water required. Max. condensation thanks to low temperatures. Thomas No. 1203C91 Dry ice condenser for distilling…

  • Graham Coiled condensing tube is sealed into water jacket Inlet and outlet tubes on opposite sides of jacket With Standard Taper drip tip joint at bottom and Standard Taper outer joint at top The 8” condenser has 19/38 joints; others have Standard Taper 24/40 joints

  • Double coil condenser for use with Buchi rotary evaporators for cooling with tap water in a diagonal position. A 19/38 top valve. With 35/20 spherical ball joint.

  • Similar to CG-1210 but with the 24/40 outer joint replaced with a serrated hose connection for use with a drying tube. This style condenser is used primarily in Soxhlet extractions or in reflux mode. Hose connections have an O.D. of 10mm at the middle serration.

  • Liebig Condensers

    United Scientific Supplies

    Liebig condensers are used to cool and condense hot vapor as part of a distilling apparatus. This condenser has a straight inner tube that the condensing vapor passes through, and a larger outer jacket that cooling water passes through. Socket is 24/40

  • Vapors rise to the top of inner tube then travel downward and condense in this highly efficient concentrator. Condensate drains through the side tube which has a standard taper inner joint the same size as the lower inner uptake joint. Serrated hose connection for connecting to vacuum source. Hose…

  • Graham Condensers with Ground Joints

    GSC International, Inc.

    Our Graham condensers are made from high-quality borosilicate glass and have a sealed, coiled inner tube and two inlet/outlet arms. These condensers have 24/4 ground glass joints, but we also sell Graham condensers with standard joints . PRODUCT WARNINGS WARNING: This product can…

  • …or hood space, and will even fit in a hotcell. Containers - use 20/30/40 mL scintillation vials, 1.6 mL Eppendorf tubes, 4 mL (1 dram) vials, or 16 mm x 100 mm test tubes The Centrifan PE uses self-generating blow-down technology to evaporate samples without a vacuum pump within a closed…

  • …or hood space, and will even fit in a hotcell. Containers - use 20/30/40 mL scintillation vials, 1.6 mL Eppendorf tubes, 4 mL (1 dram) vials, or 16 mm x 100 mm test tubes The Centrifan PE uses self-generating blow-down technology to evaporate samples without a vacuum pump within a…

  • …using the PTFE inlet tube. Thomas No. 1203C94 Vertical intensive condenser with double jacket and distributor for particularly efficient condensation. The solvent to be distilled can be continuously fed in at the distributor using the PTFE inlet tube. Condenser and receiving flask coated…

  • Condenser Size 22

    DWK Life Sciences (Kimble)

    Friedrich Condenser with hose connection sidearm. 45/50 bottom standard taper joint Ring-sealed inner condensing tube with inner drip joint and side outlet for drying tube Molded 190 mm inner cold finger Used primarily in reflux mode and Soxhlet extractions Fits tubing ID…

  • Condenser Graham Standard Joints

    GSC International, Inc.

    Our Graham condensers are made from high-quality borosilicate glass and have a sealed, coiled inner tube and two inlet/outlet arms. These condensers have standard joints, but we also sell Graham condensers with 24/40 ground glass joints . PRODUCT WARNINGS Our products are not toys . Use…

  • Condenser Liebig Standard Joints

    GSC International, Inc.

    Our Liebig Condensers are made from high-quality borosilicate glass and have a straight sealed inner tube and two inlet/outlet arms. These condensers have standard joints. We also sell Liebig condensers with rubber connections or ground glass joints . PRODUCT WARNINGS Our products…

  • …be continuously fed in through the PTFE inlet tube. Thomas No. 1203C96 Vertical condenser with distributor and stop valve for reflux distillation. The solvent to be distilled can be continuously fed in through the PTFE inlet tube. Condenser and receiving flask coated for shatter protection.

  • PCR 8-Strip Tubes

    NEST Scientific USA

    NEST has both clear and white 0.2 mL PCR tubes which respectively applies to the general PCR and qPCR reactions Same color 0.2mL low profile PCR tubes can be applied to the same usage 15.4mm low profile tubes are designed to minimize the condensate contamination, particularly for the overnight…

  • condenser with distributor and stop valve for reflux distillation. The distributor features a condensate cover and an outlet channel which prevent the condensate from coming into contact with the seal. The solvent to be distilled can be continuously fed in through the PTFE inlet tube. Condenser and…

  • West Condensers

    Chemglass

    Narrow annular space between jacket and inner tube of the West condenser provides for excellent cooling efficiency due to the increased flow rate of water. Condenser has a top standard taper outer joint and a lower inner drip tip joint. Hose connections have an O.D. of 10mm at the middle serration.

  • Strip Tubes

    Thermo Scientific Pierce

    …individual tubes Thomas No. 1207H59 Designed to reduce dead space and prevent condensation on side wall Maximum Volume: 150 L Recommended for use with low volume reations (<20 L) Strip has A-H labeled end tabs These White Box PCR tubes are designed…

  • With Standard Taper 24/40 joints Inlet and outlet tubes, 10 mm o.d. are on opposite sides, indentations at lower end of condenser tube support packing when used as fractionating column.

  • … Removable ClusterTubes make it easy to process line by line or row by row procedures Lids, with individual condensation rings above each Tube, prevent cross-contamination Tubes, in Racks with Lids, may be centrifuged, or shaken with homogenizing balls for plant genetics research. Process…

  • Hopkins condenser with tube fitting Dimensions: 50 x 260mm Joints: 24/40 Compatible With: Central collect S-EVAP KD units

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.