Tubing Clamp

Compare Tool

Select up to 3 products

Tubing Clamp
1 - 32 of 271
Sort
View
Show
  • Screw Compressor Tubing Clamps

    United Scientific Supplies

    Screw Compressor Clamps are made fo steel wire and nickel plated. Opens to either 3/4" or 1" and is available as a “closed” or “open” type.

  • Hose/Tubing Clamps

    Thomas®

    For use with all types of rubber and plastic tubing Made of chemical/corrosion-resistant, non-conducting nylon One-piece, reusable clamp squeezes shut for a leak proof seal pressing the side releases the clamp May be chemically or gas-sterilized for biomedical or food applications …

  • Scienceware® Pinchcock Tubing Clamp

    Bel-Art - SP Scienceware

    … 2848W26 Mini Clamp is single position on-off clamp; for use with thin-wall tubing less than 3/16” o.d. 2848W30 Clamp is 15-position ratchet- type for one-hand, stepwise flow control or shutoff; for use with tubing from 1/8” to 7/16” o.d. 2848W34 Clamp is 12-position…

  • Scienceware® Tubing Clamps

    Bel-Art - SP Scienceware

    …disconnecting tubing Molded of Delrin® plastic Clamp is autoclavable and resistant to acids, alkalis and organic solvents Accepts flexible tubing up to 14mm (1/2") O.D. Spring Tubing Clamp Squeeze control Perfect for flexible tubing Positive action, self closing clamp

  • Scienceware® Screw-Clamp Compressor and Swing Jaw™ Tubing Clamps

    Bel-Art - SP Scienceware

    tube from slipping out Swing Jaw™ Tubing Clamps For all fixed tubing Zinc-plated steel clamp provides non-slip closure for flexible tubes Knurled nut compresses against a swinging jaw with smooth clamping surfaces Can be installed or removed without disconnecting tubing

  • GTR Series Industrial Tube Rotators

    Globe Scientific

    …directly on the unit housing. The unit housing, tube holder disks and tube clamps are metal, alleviating the breaking of plastic holders and clamps seen in models from other manufacturers. Optional disk stacking rods allow up to two tube disk holders to be used simultaneously for increased…

  • Keck Ramp Clamp Tubing Clamps

    Oakton

    …RAMP CLAMP tubing clamps for easy, one-handed tubing flow control. Select standard taper clips (in plastic or lacquer-coated steel) or ball-joint clips for secure glass-to glass connections.Unique wheel-in-groove clamp design permits one-handed flow control. Simply remove wheel to insert tubing,

  • Clamps

    Dynalon

    …control. The clamp design features easy tube insertion for both manual and automatic operations. Molded of polypropylene suitable for ETO sterilization and is stocked in white. (Other colors available on special order).  Accepts approximately 1/4" to 1/2" OD tubing.   Mini…

  • Screw Compressor Clamp, Closed-Jaw C-Clamp

    Humboldt

    Screw Compressor Clamp, Closed-Jaw C-Clamp with Side post for tubing insertion. Jaw Opening: 0-7/8" (0-23mm) Max Height, 1-1/8" (30mm) Max Width

  • Pinch Clamps

    Thermo Scientific Nalgene

    All-plastic clamp will not rust, corrode or deform Molded in one piece to eliminate sharp edges Autoclavable Allows precise, one hand regulation of fluid flow, from completely open, to restricted flow, to completely closed. Ideal for use with Nalgene laboratory tubing.

  • Carboys w/Tubing & Clamps

    Dynalon

    …with tubing and clamp LDPE Heavy duty LDPE carboys with 5 ft. of vinyl food grade tubing (1085 series) 1210D25 Supplied with 1/4" I.D., 3/8" O.D.  tubing, and use standard 15 position Dura-Clamp (7075-0000). Supplied with vented closures. Hose tubing can be clamped

  • Nylon Tubing Clamp Kit

    Chemglass

    A great way to be prepared for your next clamping situation! Kit contains 5 each, of all 13 sizes, neatly organized in a polypropylene box with adjustable dividers.

  • Accessories: Clamps & Test Tube Racks

    New Brunswick Scientific

    Sticky Pads are an alternative to flask clamps for securing vessels to a shaker platform Ideal for containers such as bottles and dishes that cannot be held with conventional flask clamps With flasks, these products can be used at speeds of up to 200 to 300 RPM depending on orbit diameter,…

  • Test Tube Clamp

    United Scientific Supplies

    Self closing brass test tube clamp with finger grips and without finger grips

  • Tubing Connector Kit

    Dynalon

    Product Dimensions (l x w x h) : 11x6.75x2.5in Tubing Connector Kit consists of a 55-piece assortment of connectors and clamps needed in daily lab routines or for industrial application. Supplied in handy plastic compartment tray. Kit includes: 14 Y connectors, 2 each size; 12 quick…

  • Screw Compressor Clamp, Swinging Jaw Clamp

    Humboldt

    These safe, simple and strong tubing clamps can be used on thin or heavy-wall tubing. Made of plated steel, the clamps incorporate a large aluminum knurled adjusting nut.

  • Hook Clamp

    Humboldt

    The Clamp Hook locks into any position to support suspended thermometers, drying tubes and potash bulbs. The unit has an easy-adjusting check nut and has a 5-1/8" (130mm) maximum distance from center of muff to the hook. The minimum distance is set at 4-1/2" (114mm).

  • Side Load Pinch Clamp, White

    Qosina

    Technical Features: Fits 0.197 inch - 0.284 inch OD Tubing (5 mm - 7.2 mm)

  • Screw Compressor Clamp, Closed Jaw (Hoffman)

    Humboldt

    Screw Compressor Clamps are used to control the flow in flexible tubing. The clamps have a machined adjustment screw to permit accurate regulation of the flow. All corners are rounded to prevent cutting of the tubing. The clamps feature brass construction that is plated for corrosion resistance and…

  • Extension Clamps

    United Scientific Supplies

    3 pronged extension clamp is 10" long and has rubber tubing covering the prongs Extention Clamp with cork covered jaws, 8" total length 3 Pronged clamp with aluminum rod, 10" long

  • Vacuum Tubing Kit

    Labconco

    Desiccator Vacuum Tubing Kit. Vacuum Tubing Kit includes 1/4" ID and 1/2" ID vacuum tubing, each 48" long, two each 1/4" and 1/2" tubing clamps; 1/4" to 1/2" barbed reducer Kit allows connection of the Desiccator's 1/4" diameter brass needle…

  • Stronghold Support Glass-Filled Nylon Jaw Clamps

    Harvard Apparatus

    CLEARANCE SALE! Original Price: $30.00 Medium clamp has fixed screw action and open to 1 3/4” (45 mm) for tubes, flasks, columns and larger rods. Clamp has male connector. * Sale price valid only on current stock. Additional units may be available for purchase at…

  • Hose/Tubing Clamp Assortment Kit

    Thomas®

    Can be gas or chemically sterilized 65 total pieces in 13 sizes One-piece, reusable clamp squeezes shut for a leakproof seal. Made of chemical/corrosion-resistant, rustproof nylon. Diameters range from 0.246 to 1.610 inches. Temperature range is 32 to 194°F/0 to 90°C.

  • Wooden Test Tube Clamps

    Humboldt

    This clamp is constructed from hardwood with a smooth finish and self-closing spring. The clamp will accept tubes up to 3/4" (19mm) in diameter. Overall length is 7" (178mm).

  • Labjaws Thermometer Swivel Clamp

    Ohaus

    Holds glass tubes or thermometers from 6 to 13 mm diamter. Swivel lock adjusts from any angle through 360°. Distance from thermometer to support rod in 99 mm. Overall length is 122 mm. Integral post holders for easy connections.

  • Mohr's Pinchcock

    United Scientific Supplies

    Mohr's Pinchcock tubing Clamp is made of steel wire and nickel plated. Available for tubing diameters of 10mm, 13mm, and 16mm.

  • Screw Compressor Clamps: Open Jaw (Hoffman)

    Humboldt

    Screw Compressor Clamps are used to control the flow in flexible tubing. The clamps have a machined adjustment screw to permit accurate regulation of the flow. All corners are rounded to prevent cutting of the tubing. The clamps feature brass construction that is plated for corrosion resistance and…

  • Carboy, Low-Density Polyethylene Tubing & Clamp 6.5 Gallon

    Dynalon

    Carboy, with tubing and clamp low-density Polyethylene 6 1/2 gallon capacity  Heavy duty low-density Polyethylene carboys with 5 ft. of vinyl food grade  tubing (1085 series). Supplied with 1/4" I.D. x 5/8" O.D. tubing and a 12 position Dura-Clamp(TM) ( 1212X09 ) attached.…

  • Test Tube Clamps

    Humboldt

  • Scienceware® 28-Piece Fittings Kit

    Bel-Art - SP Scienceware

    …not autoclavable or FDA grade Kit contains: 6 Straight Tubing Connectors, 7 Stepped Tubing Connectors, 5 Wye (Y) Tubing Connectors, 3 "T" shaped Tubing Connectors, 5 Quick Disconnects and 2 flow control Plastic Tubing Clamps Plastic organizer box has room for adding other fittings…

  • Accessories: Clamps & Test Tube Racks

    New Brunswick Scientific

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.