Tubing 8mm

8mm ID silicone tubing with foam rubber insulation for handling water or a water-glycol mixture in LAUDA thermostats For temperatures from -60 to +100 degrees C

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

With standard taper 24/40 joint and 8mm O.D. outlet tube bent at 75 degree angle.

To maximize SNR, Precision NMR Tubes have minimal paramagnetic impurities that would impact shimming. Tight ID and OD tolerance as small as 0.0065mm accommodates Wilmad inserts. Manufactured in a state-of-the-art ISO 9001:2008 USA facility using a unique precision shrinking and grinding…

Withstand 17,000 x g Made of polypropylene RNase/DNase free Our original micro tubes were introduced in 1978. Two decades later, thousands of laboratories are still using them, thanks to their broad selection and reputation for reliability. Although we have subsequently introduced…

…best sealing and the threaded polypropylene extracting nut ensures effortless removal. NOT autoclavable Safely and securely positions glass tubing in a 24/40 joint. Available for 8 and 10mm diameter glass tubing Inert Teflon® PTFE adapter Joint Size: 24/40 Hole Opening: 8mm

Made of a low expansion borosilicate composition with high chemical resistance Meets all U.S. pharmacopoeia specifications for Type 1A glass 4 to 32mm O.D. sizes are 1219mm long ± approximately 6mm. 4mm O.D. have ends cut, while 5 to 32mm sizes have ends fire polished. 35 to 178mm…

…glass tubing has a wall thickness of 1mm to 1.2mm. This assorted set of borosilicate glass tubing includes 36 pieces total. The pieces are as follows: 12 pieces of 5mm tubing, 11 pieces of 6mm tubing, 4 pieces of 7mm tubing, 3 pieces of 8mm, 3 pieces of 10mm tubing, and 3 pieces of 12mm tubing. Each…

Connecting Tube, Y-shaped, Synthware, Tubing OD: 8mm.

Outside diameter of tube 8mm, total length of tube 150mm.

…length 14mm arm length "Y" Shaped Glass Hose Connector. Available in the following sizes: 1/4" (6mm) arm length 5/16" (8 mm) arm length 3/8" (10mm) arm length 1/2" (12mm) arm length Straight Connecting Tube 8mm od x 63mm length

,p>Diameter of disc 30mm, height above disc 100mm, diameter of bottom tube 8mm.

Outside diameter of tube 8mm, total length of tube 150mm. All porosities of a given size are priced the same.

Outside diameter of tube 8mm, total length of tube 150mm. All porosities of a given size are priced the same.

…flint (soda lime) glass tubing includes 46 pieces total, all of which are 24" in length. Each set includes the following: 15 pieces of 5mm tubing, 14 pieces of 6mm tubing, 5 pieces of 7mm tubing, 4 pieces of 8mm tubing, 4 pieces of 10mm tubing, and 4 pieces of 12mm tubing. PRODUCT WARNINGS …

Application: Buccal Sampling Mateiral: 100% Medical Grade Nylon Sterilization: EO Tube Length: 175mm Tube Diameter: 10mm Swab Length: 145mm±2mm Flocked Tip Length: 22mm Flocked Tip Diameter: 4.8mm±0.2mm Packing: Individual Sterile Package Certificate: CE/FDA/ISO/TGA…

27mm tubes (Thomas No. 0319Y64) These 27mm inner diameter PYREX® filter tubes have an 8mm. O.D. by 75mm long constricted lower end. They can be used on the bottom end of 30mm O.D. PYREX® Gooch Low Form fritted disc crucibles to collect the filtrate. Also for use with porcelain plates. …

Hollow fritted cylinder at the end of an 8mm O.D. tube. Cylinder is approximately 12mm O.D. x 20mm long. Overall length is approximately 10 inches.

…gas conditions) when the pressure drop across the orifice is 41cm Hg or greater. Stopper fits 24/25 125ml bottle and features a 11mm OD center tube, 8mm OD side arm with bulge, 0.035in capillary tip that is positioned 4mm above the bottom of the bottle. Particulate capture range: 0.6 to 2 microns.

…12.6L/min. (corrected to engineering standard gas conditions) when the pressure drop across the orifice is 41cm Hg or greater. Stopper fits 24/25 125ml bottle and features a 11mm OD center tube, 8mm OD side arm with bulge, 0.05in capillary tip that is positioned 4mm above the bottom of the bottle.

…gas conditions) when the pressure drop across the orifice is 41cm Hg or greater. Stopper fits 24/25 125ml bottle and features a 11mm OD center tube, 8mm OD side arm with bulge, 0.05in capillary tip that is positioned 30mm above the bottom of the bottle. Particulate capture range: 0.8 to 15 microns.

Gas Dispersion Tube, Fritted, Synthware, Disc Diameter: 10mm, Disc Porosity: Extra Course, Course and Medium available, Stem OD: 8mm, Stem Length: 150mm

Supplied with 6, 7 or 8mm O.D. stem tubing, 150mm in length. Maximum O.D. of stem and filter disc is 20mm. Filter disc is 10mm diameter, porosity B (70-100 m).

6,8mm Zirconium oxide beads (100 beads per box); 6.8mm Zirconium oxide beads (100 beads). To be combined with Precellys empty tubes.

Adapter has a Nylon compression cap and a Viton o-ring to form a vacuum tight seal. Cap accommodates 5.0 - 7.5mm O.D. thermometer or gas inlet tube. The 8mm hose connection can be used for N2/Ar introduction or vacuum. Supplied with one Nylon cap and one Viton o-ring.

Used to make a vent to the atmosphere. May also be used with mercury when adequate ventilation is available. Reservoir head prevents oil from being sucked back into the system. With 8mm O.D. tubing connections. Volume approximately 40mL below side arm.

Label Size: 0.91" x 0.32" (23mm x 8mm) Ideal Use: 0.2ml PCR tubes Sheet Layout: 7 across - 22 down Labels/Sheet: 154 Colors: White U of M: 3,850/pack

…stopcock is located 100mm from the end of the manifold and 40mm from the first port. The distance between the other 3 ports is 50mm with the last port being 75mm from the opposite end of the manifold. The entire manifold is constructed of capillary tubing having an O.D. of 8mm and an I.D. of 2mm.

…feature Easy Action PTFE stopcock valves providing for greaseless operation. Double-tube codes -50 & -54 feature Ace-Threds and 8mm OD tube-end ports. Double tube code -52 features hose barbed connections and 45 degree port placement. Walters manifold, code -40, incorporates a removable vacuum…

…to CG-1206 but with detachable hose connections. Connections are made of polypropylene and provide a safe and easy way of connecting and disconnecting flexible tubing to the condenser. Hose connections have an O.D. of 8mm and an I.D. of 4mm. Supplied complete with two GL-14 open top screw caps.

…connections. Connections are made of polypropylene and provide a safe and easy way of connecting and disconnecting flexible tubing to the condenser. Hose connections have an O.D. of 8mm and an I.D. of 4mm. Supplied complete with two GL-14 open top screw caps. See CG-198 and CG-195 for replacement GL…

…connections. Connections are made of polypropylene and provide a safe and easy way of connecting and disconnecting flexible tubing to the condenser. Hose connections have an O.D. of 8mm and an I.D. of 4mm. Supplied complete with two GL-14 open top screw caps. See CG-198 for replacement GL fittings.