Tube Washers

Compare Tool

Select up to 3 products

Tube Washers
1 - 32 of 67
Sort
View
Show
  • … All models feature noise buffering insulation; Freestanding/Mobile Washers have a full 304 stainless steel casing for style and durability All washer units have adjustable height legs and Freestanding/Mobile Washers are supplied with removable wheels/casters DI models easily install with…

  • …oven is needed. Specialized inserts for pipets, BOD bottles, petri dishes, culture tubes and small utensils enhance its versatility. FlaskScrubber Vantage™ Series Glassware Washers are freestanding washers with specialized features for contamination-sensitive research. Adjustable cycle…

  • …for vertically-positioned test tubes Holds up to 600 each 13 mm tubes or 244 each 20 mm tubes Bottom, grate size 0.38" (9.5 mm), allows water to drain from inverted tubes. When insert is less than fully loaded, the divider may be adjusted to keep tubes upright Smallest divided…

  • …2000 mL Stainless steel base stand elevates anyfreestanding washer 17” or more for comfortable loading and unloading Pertri dish insert holds 24 plates BOD bottle insert holds 12 bottles Culture tube insert Pipet insert holds 16 pipets A variety of…

  • Pipette Washer/Dryer

    SPEX CertiPrep

    …the door and attach the tubing to the wash or rinse line. The washer can also be used with the washer basin and pump to circulate wash or rinse solution through the pipettes. The solution shoots out of the pipettes tip, reflects off the ceiling portion of the washer and rains a shower down over…

  • Made of polypropylene Caps are available either with or without a silicone washer between the cap and the tube to ensure a positive leakproof seal at all temperatures. As for tubes, these closures are also made of polypropylene, providing the same coefficient of expansion for both, which…

  • Pipet Washers

    Thermo Scientific Nalgene

    … Inlet connector is near base for stability; water enters chamber at top to prevent back flow Furnished with 1.2 and 0.5 m length of PVC tubing for connection to source and drain. 7792H54 Chamber, for pipets up to 400 mm, has overall height of 772 mm. 7792H64 Chamber takes pipets up to 600…

  • SYNTHWARE NMR Tube Washer

    Kemtech America

    …joint and 10mm hose connection. For 5mm NMR tube only. The NMR tube is inserted into the tube cleaner with its plastic cap placed on the closed end to provide support and a vacuum seal. The washing solvent is sequentially added through the side tube while a vacuum is applied through the hose…

  • …ready for use in sensitive research. Specialized inserts for pipets, BOD bottles, petri dishes, culture tubes and small utensils enhance the washer's versatility. The washer may be outfitted with an Upper Standard or Spindle Rack to increase capacity. In addition, a Lower Standard Rack…

  • …material, human or animal cells, at temperatures as low as -196°C (but should be used only in the gas phase of liquid nitrogen). A silicone washer between cap and vial ensures a positive leakproof seal at all temperatures. A 1 1/4 turn of the cap is sufficient to seal the vial. Closure and vials…

  • … SteamScrubber Glassware Washers have stainless steel top and bottom racks that accommodate basket inserts for a wide variety of glassware shapes and sizes, primarily beakers and other wide-mouth glassware. Specialized inserts for BOD bottles, petri dishes, culture tubes and small utensils enhance…

  • …TS Microplate Washer . Replacement parts are still available below. 8-, 12- or 16-channel manifolds with or without valves 25 to 3000 µl/well volume range Wash single strips or full plates IVD Directive compliant ELx50™ Auto Strip Washers are self contained…

  • Aluminum Test Tube Baskets

    Heathrow Scientific

    Ideal for washing and storing test tubes Use these lightweight yet strong baskets with mechanical washers and autoclaves. Durable construction will withstand repeated use in the lab.

  • …pipettes. 1EA ScrubAir Spindle Kit: Spindles add versatility by permitting small test tubes or vials, 7 mm ID or larger, to be washed in the ScrubAir. Kit contains 24 each 5 mm OD polystyrene plastic spindles with caps and stainless steel test tube rack to hold up to 20 each test tubes.

  • Universal Solvent Jet NMR Tube Washer

    Wilmad-LabGlass - SP Scienceware

    …Jet NMR Tube Washer can be used for any length NMR sample tube by a simple adjustment of the flexible PTFE tubing. By loosening and retightening the fitting on the assembled washer head, the PTFE tubing that extends into the sample tube is adjusted to the proper length. The washer head is then…

  • Made of polypropylene Caps are available either with or without a silicone washer between the cap and the tube to ensure a positive leakproof seal at all temperatures. Closures and tubes are both manufactured of polypropylene, providing the same coefficient of expansion. The cap features a long…

  • Scienceware® Vakuwash® Cuvette Washer

    Bel-Art - SP Scienceware

    …delicate glass or quartz cuvettes, this all-plastic washer replaces costly, antiquated devices that are often more fragile than the cuvettes they wash. Comes complete with a 500 cc polypropylene vacuum flask, Vikem(R) vinly stopper, and 3' of PVC tubing ready for connection to a vacuum line. The…

  • …sample tubes manufactured of translucent autoclavable polypropylene. Tube with internal threads. Caps are supplied with or without a silicone washer, to ensure a positive leakproof seal at all temperatures. A 1-1/4 turn of the cap is sufficient to seal the vial. Since both closures and tubes are…

  • …durable washers include Standard, DI Rinse, and DI Rinse/Spindle Rack Ready models. All DI models also have the option of a DI Booster Pump, recommended when the incoming DI water source has a pressure of less than 18psi. All models feature noise buffering insulation All washer units have…

  • Economy Single Tube Solvent Jet Washer/Cleaner

    Wilmad-LabGlass - SP Scienceware

    …inverted sample tube is inserted into the washer and solvent is introduced into the reservoir using a series of wash bottles. You can perform numerous wash steps and finish by pulling air through the tube to complete the procedure. Filter flasks are ordered separately. The single tube washers

  • Scienceware® Cleanware Electrode Washer

    Bel-Art - SP Scienceware

    …reservoir holds distilled water Includes length of PVC tubing to drain discharge directly to the sink Electrode hangs into the spray chamber and with a squeeze of the reservoir, a spray of water rinses the electrode Base is 14cm (5-1/2") diameter; washer is 21cm (8-1/4")

  • …customized to meet specific requirements. This ultimate space saver provides up to 33% smaller footprint than washers of similar capacity. Multiple Vertical SpaceSaver™ Washer models are available, all supplied with mounting feet and wheels, and fully cased in 304 stainless steel for…

  • Cryogenic Vials and Caps

    NEST Scientific USA

    …-Thread Cryogenic Vials Used for storage in the gas phase of liquid nitrogen. Special screw cap designed without silicone washer to avoid the chronic toxicity cells Star upright design for the bottom of the tube allows for self-standing 6 colored cap inserts for easy identification

  • Multi-Tube Jet Solvent NMR/EPR Tube Washer and Dryer

    Wilmad-LabGlass - SP Scienceware

    …Washer/Dryer is recommended for research labs that routinely clean NMR and EPR tubes; a single unit can accommodate up to 5 tubes (3, 4 and 5 mm OD) at once. When an inverted tube is inserted onto the solvent transfer tubing and the open end is immersed under wash solvent in the solvent cup, a…

  • …nearly any unpressurized container are available. Dispensette® S bottletop dispenser is supplied with performance certificate, telescoping filling tube, recirculation valve and recirculation tube (if specified), valve mounting tool and a selection of polypropylene adapters. Bottle not included.

  • 50™ TS Microplate Washers

    BioTek Instruments

    The 50™ TS Washer offers functionality that is unsurpassed in its class. The color touchscreen provides a visual interface that makes creating protocols fast and intuitive. Its performance for conventional plate washing is excellent, and it is also ideal for cell-based assay washing and for…

  • Cuvette Washer

    DWK Life Sciences (Kimble)

    Name Utility Washer Capacity (mL) 250 Overall Height (mm) 255 Fits Tubing ID (inches) 3/8 Case Qty 1   ·         Unit is supplied with one gasket, a tube washer, an Erlenmeyer…

  • …pump has on/off switch and is connected to filler by two 1.3-m lengths of vinyl tubing. Provides suction to 412 inches Hg (15.2 kPa). Overall 114 x 89 x 64 mm high, mounted on rubber base. Filler handle and tubing are autoclavable. With 2-wire cord and plug. Pipet-Aid with Filter Trap …

  • Baskets, insert racks and spindle racks maximize space, improve efficiency and protect specialty glassware. All accessories are stainless steel construction for long life and durability.

  • The Blot Washer

    IBI Scientific

    …automated dispensing and aspiration of western blot reagents. The IBI Blot Washer system comes with the pump/module, 4L wash bottle with cap, 4L waste bottle with cap, mini blot tray, standard blot tray, vacuum tube with connectors, dispense manifold, aspirate manifold, power cord, and operation…

  • …features an exclusive silicone seal fitted inside the cap to ensure a positive seal at any temperature, even the lowest of cryogenic temperatures. Tubes are provided with a white marking area for sample identification and can be color coded by the use of a CAPINSERT™ (Series T312). The Simport…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.