Tube To Tube Barb Fitting

Compare Tool

Select up to 3 products

Tube To Tube Barb Fitting
1 - 32 of 38
Sort
View
Show
  • Sanitary Hose Barb Connector

    Thermo Scientific Nalgene

    Thermo Scientific™ Nalgene Sanitary 1 in. Hose Barb connector supports connections between 1 ″ sanitary fitting to flexible tubing with inner diameter of 0.5".

  • Quick Connect Closures, Hose Barb Fittings

    Thermo Scientific Nalgene

    Hose barb fitting to quick connect adapters Nalge 2159 series Provides multiple connection to the quick filling closure ports Ultimate in versatility and adaptability in creating vacuum trap type systems. Available in straight or elbow design to fit 1/4” or 3/8” tubing

  • Fitting Kit for ASXPRESS PLUS

    PerkinElmer

    It includes: 2 ea. green flangeless connectors, CTFE 2 ea. blue flangeless connectors, CTFE 2 ea. white flangeless connectors, CTFE 2 ea. natural flangeless connectors, CTFE 10 ea. CTFE ferrules for 1/16 inch (1.58 mm) tubing 1 ea. 6.4 mm to 3.2 mm (¼-28 UNF to 1/8") barbed fitting - ETFE

  • EZwaste® Replacement Fittings

    Foxx Life Sciences

    fittings for EZwaste Solvent Waste System's fittings. It includes (25) 1/8" MNPT x 1/4" Hose Barb fittings. These tube fittings secure waste tubes to carboy providing the closed system necessary to prevent spills. 1170A88 The 1/8" MNPT x 3/8" Hose Barb fittings Pack is…

  • Tubing Sinker Set

    Bel-Art Products

    … Weighted ends are open in the center Feature a tapered, barbed fitting that easily inserts into the I.D. of the tubing Sinker keeps the attached tubing submerged in the liquid Teflon® construction means they are autoclavable, chemically inert and will not adhere to container wall

  • Quick Couplings for Plastic Tubing

    Konstance Pneumatics

    …Acetal Hose barb fitting Coupling Body, Panel Mount (9580X26, X30, X32) With shutoff valve Delrin® Acetal Hose barb fitting Coupling Body, In Line (9580X50, X54, X56) With shutoff valve Delrin® Acetal Hose barb fittings Coupling…

  • Polycap™ HD (Heavy-Duty) Capsule Filters

    GE Healthcare

    …extraneous materials such as glues, adhesives, metals, mold release agents or surfactants are used. Stepped barb inlet and outlet fittings take 1/4" to 3/8" (6 to 12 mm) tubing. Typical applications include: general fine filtration, prefiltration, clear air/gas, sample prep, solvents,…

  • Whatman Polycap GW

    GE Healthcare

    …filter that can be used as a convenient in-line filter unit. Stepped hose barb fittings allow for connection directly to outlet of a sampling pump with various size tubing Effective filtration surface area of 600 cm² to ensure rapid sample collection PES filters in thermally fused housing…

  • Polycap As Nylon Membrane Capsule Filters

    GE Healthcare

    …into a bottle, flask or other container. Inlet and outlet fittings are 1/2" (3/8" to 1/2" tubing) or 1/4" (1/4" to 3/8" tubing) step barb (SB), except 4651B03, B17 and B21 which have 1/4" Male National Pipe Thread (MNPT) inlet fittings. Filters are sold individually. *Typical values @ 1.0 bar…

  • Polycap™ TC Polyethersulfone Capsule Filters

    GE Healthcare

    …are used. Available in three sizes, with and without filling bell. Inlet and outlet fittings are 1/4" (for 1/4" to 3/8" tubing) or 1/2" (for 3/8" to 1/2" tubing) step barb (SB). Typical uses include pharmaceutical aqueous solutions, tissue culture media, virus…

  • Scienceware® Wye (Y) Tubing Connectors

    Bel-Art Products

    Use these fittings to ensure a tight, secure connection between lengths of tubing having the same inner diameter (I.D.). Multiple barbs per arm provide additional contact between the fitting and the tubing for extra gripping power Chemical-resistant polypropylene plastic for use with a…

  • Whatman Polydisc In-Line Filters, Aqueous Solution

    GE Healthcare

    …longevity Radiation sterilized, so there are no ethylene oxide (EtO) residuals Barbed hose connections fit multiple tubing sizes Integrity-testable with the bubble point method Lightweight design prevents tubing collapse Whatman filters with polyethersulfone membranes have low protein binding…

  • Polycap TF PTFE Membrane Capsule Filters

    GE Healthcare

    …surfactants are used. Available in two sizes, 500 or 1000 cm 2 . Inlet and outlet fittings are 1/2" (3/8" to 1/2" tubing) or 1/4" (1/4" to 3/8" tubing) step barb (SB) or 1/4" Male National Pipe Thread (MNPT) inlet fittings as noted below. Filters are sold individually. *@ 1.0 bar (14.5 psi) …

  • White Premium Food Grade Silicone Vacuum Tubing

    Across International

    …odors and maintains its flexibility over time. Use with water, air, and food and beverage. Tubing is made from FDA-compliant resins. Material meets ASTM D2000. Tubing can be sterilized with steam (autoclaving) and radiation. Temperature Range: -94°F to 392°F Use with barbed fittings

  • Tygon S3™ E-3603 Laboratory Tubing for Vacuum Applications

    Saint Gobain

    …extra thick walls to support laboratory vacuum pump applications. Vacuum tubing features improvements to bend radius as well as higher and more consistent levels of working pressure and vacuum pressure ratings. Flexible and strong, the tubing easily connects to hose barb fittings to form a tight…

  • YSI Conductivity Cells

    YSI

    … Precision cells contain platinized platinum-iridium electrodes Accurately calibrated to ±1% of cell constant Connector is spade lug type 3240D35 microcell can be used in test tubes with 5 mL sample Handle flows up to 7 gallons per minute Standard barb fitting

  • Scienceware® Quick Connectors

    Bel-Art Products

    Fits tubing from 3 to 12,, (1/8 to 1/2") I.D. Two barbed polyethylene connectors that assemble tightly together with a male-female center taper Useful in connecting and disconnecting vacuum lines and other tubing assemblies All sizes are interchangeable with others, making for reducing…

  • IWT Ionxchangers, Wall Brackets

    Evoqua Water Technologies

    Two types available Can be used in either single or duplex cartridge operation mode Model 3923D40 has a faucet adapter, 3 ft. hose and barb fittings. Model 3923D50 has 1/4in. tube threaded fittings for more permanent connection to a water line. Recommended line input pressure is 30 psi.

  • VersaBarb™ and Spigot Technology

    Foxx Life Sciences

    …The spigot design also features a positive hard stop to prevent over-tightening which can damage the seal. The spigot opening features 5/8" and 3/4" hose barbs for tube attachments, as well as an internal luer taper to fit a male barb adapter. The leakproof VersaBarbs provide bottom…

  • Disposable Aseptic Transfer Caps for Plastic Erlenmeyer Flasks

    Corning

    …PVDF membrane and a barbed fitting Liquid transfer port has an internal end with a rigid polypropylene dip tube angled to reach the bottom of the flask and on the external side a 1/8 inch ID (3.2 mm), 1/4 inch (6.4mm) OD chemically resistant, heat sealable flexible tubing, ending in a male luer…

  • IWT Ionxchangers

    Evoqua Water Technologies

    …3 to 6 months. METEX Model (3923D85) Widely used in removing ammonia and other cations Removes all metallic ions to a level of 0.1% of the influent. Color indicating type. Model 3923D40 has a faucet adapter, 3 ft. hose and barb fittings. Model 3923D50 has 1/4in. tube threaded fittings for…

  • Roto-Flo™ Flow Indicators

    Bel-Art Products

    …of flow in a tubing line Brightly colored indicator polypropylene paddle wheel Fits tubing I.D.: 4mm to 7mm (1/4" to 5/16") Tube ends: Barbed The flow indicator provides immediate visual indication of water, air or gas flow, when the paddle wheel begins to spin. Body…

  • Sciencware® Stopcocks

    Bel-Art Products

    … This polypropylene stopcock has a detachable, watertight and inert Teflon® PTFE plug that contacts any fluid being dispensed. The barbed fitting end accepts 6.4 to 9.5mm (1/4 to 3/8") I.D. tubing. Three-way models allow connection of two or three arms. Pressure rating is 240 KPa (35 psi).

  • PVC Extraction Manifold

    Advantec MFS

    to maintain sterility. The manifold outlet is 1/4"male to hose barb fitting connects to 3/8" id tubing. Not autoclavable. Please Note: ALL Advantec items have a maximum 48 hour cancellation window. Any cancellations AFTER the 48 hour window will incur a restocking fee equal to the…

  • Stainless Steel Vacuum Manifold

    Thermo Scientific Nalgene

    …securely holds a No. 8 stopper and the stem filter funnel without interference Autoclavable Easy manipulation of individual funnels due to spacing of outlets. Teflon stopcock on each valve shuts off flow when fewer than three outlets are used. Barbed fitting accepts 3/8” i.d. tubing.

  • PVC Manifold

    Advantec MFS

    …stopper to adapt to microanalysis units of various sizes. The 3-place manifold can accomodate 90mm holders. Use 47mm or smaller holders on the 6-place model. The 2-way valve is PVC with a PTFE stopcock. The manifold outlet is 1/4"male to hose barb fitting connects to 3/8" id tubing. Not…

  • Sterility Test Manifold

    Advantec MFS

    …filter(13JP020AN) or KS13 holder with PTFE filter(J020A013A) to maintain sterility. The main manifold outlet is 1/4"male to hose barb fitting connects to 3/8" ID tubing. The flushing manifold hose barbs accept 1/4" ID tubing. Please Note: ALL Advantec items have a maximum 48…

  • Standard Aqueous 50 mL Glass Twister Spray Chamber Assembly for Optima 2x00/4x00…

    PerkinElmer

    …Mount Sleeve (N0776004) Cyclonic Spray Chamber Mount Ring (N0776003) 1.78 I.D. Viton ® O-Ring (09902234) Nipple 1/8 Barb Fitting (09903730) Thumb Screw #8 Knob (09908517) M4 Hex Nut (09919035) M3 Cap Screw (09919052) M4 Cap Screw (09919167) 2.8 mm I.D. PVC Solvent Flex Tubing (09985735)

  • Filling/Venting Closure

    Thermo Scientific Nalgene

    For aseptic liquid transfer to Nalge containers Nalge 2162 83 mm polypropylene cap with fittings Two 1/2” filling ports and one vent port Autoclavable Two barbed filling ports for 1/2-inch-i.d. tubing and one 3/8-inch-o.d. vent port used with syringe/air filters.…

  • Spinner Flask

    Corning

    …filter with a 0.2µm pore PVDF membrane and a barbed fitting The liquid transfer port has an internal end with a rigid polypropylene dip tube angled to reach the bottom of the flask and on the external side a 1/8 inch ID (3.2 mm), 1/4 inch OD C-Flex tubing ending in a male luer lock (MLL) connector…

  • E-Cube Culture System

    Corning

    …medium are not included. E-Cube Fittings Kit contains 3/16” Norprene™ pump tubing (18”); 6 tubing ratchet clamps; 2 barbed T-fittings; 1 barbed reducing connector; 20 4 wire ties; 1 barbed Y-connector; 5 each male and female barbed luer fittings; 2 male luer plugs; 2 interlink…

  • Laboratory High Vacuum Pump

    Fischer Technical

    to Use: Turn black cap counterclockwise to open. Place vacuum pump in the cradle and drain pump. Once the pump has finished draining, turn the black cap clockwise to close after every use. Holds up to 5 oil changes. Vacuum Gauge and Fittings Bourdon tube vacuum gauge and fittings to add to

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.