Tube Stirrer

Compare Tool

Select up to 3 products

Tube Stirrer
1 - 32 of 35
Sort
View
Show
  • Radleys Starfish Multi-experiment Heating And Stirring Workstation

    Heidolph

    …glassware and any brand hotplate stirrer to create a flexible, affordable workstation to meet users chemistry needs. For use in benchtop stirring applications from 2 to 250 mL, the StarFish accepts a wide range of standard glassware, including dram vials, test tubes, beakers and round-bottom…

  • Jacketed Double Sidearm Celstir® Spinner Flasks

    Wheaton

    …connectors accept 1/4 in (6.35 mm) ID tubing. This unit is made from Wheaton 33 low extractable borosilicate glass that conforms to USP Type I and ASTM E-438 Type I, Class A requirements. For suspension cell culture with a magnetic stirrer 360° water jacket for precise temperature…

  • Spinfin® Magnetic Stirring Bars

    Bel-Art Products

    Spinfin® magnetic stirring bars agitate liquids in round bottom vessels such as test tubes, cylinders and flasks, where other stirring bars cannot be used. Maintains its position in a vessel and will not wobble Alnico magnet encapsulated in FDA Grade, USP Class VI Teflon® PTFE low…

  • Non-Electric Magnetic Stirrer

    Dynalon

    …construction Corrosion-proof Speed range: 0-800 rpm Usable in hazardous locations, baths, incubators or other areas where electric stirrers are impractical Operates on water or air pressure between 15 and 40 psi. Knob regulates air/water pressure to control stir speed. Rated…

  • Turbine-Driven Stirrer

    GFS Chemicals

    … Completely immersible, allowing use in water baths Several stirrers can be connected in series Housing, 3” diameter x 3/4” thick, encases driving magnet, which is mounted in vaned rotor. Maximum width 3 1/2”. Inlet and outlet tubes take 1/4” tubing.

  • Thomas Pestle Tissue Grinder Components

    Thomas®

    …speed stirrer or connection to the drive shaft by a piece of heavy wall rubber tubing. In use, the grinding vessel is held in the hand and slowly moved up and down over the rotating pestle. Stirrer rotation must be clockwise as viewed from above. NOTE: for suitable slow speed stirrer, see…

  • Stirrer Accessories

    Troemner

    Extension Sleeves Comprised of precision bored stainless steel tubing. Mixing paddles are joined to the shafts of the same diameter to increase the paddle length. You can connect the mixing paddle directly to the motor shaft by using the extension sleeve in place of a chuck. Fits…

  • Stirrer Assembly, Vacuum, Debris Free

    Ace Glass

    …ball joint seal gives vacuum-tight connection good into the micron range. Ultimate vacuum is determined primarily by the tightness of the vinyl tubing connector which fastens the unground shaft to the ball member. Operate below 500 rpm. Use with unground stirring shafts (8134,9530). Lubricate the…

  • Scienceware® Air Operated Turbine Magnetic Stirrer

    Bel-Art Products

    … Compact unit Stirrer is powered by a low pressure air supply that eliminates the sparking hazard from electrical sources. Compact unit operates using only 3 to 8 psi (21-55 kPa) air pressure and it is useful for stirring vesseals up to 1 liter. Tubing is provided to connect to an…

  • Test Tube Rack For 60 Tubes 20 mm

    Thermo Scientific

    Thermo Scientific™ Cimarec™ i Test Tube Racks for use with Telesystem Series Stirrers. Stainless-steel test tube rack Ensure test tubes are precisely centered over stirring point Rack holds 20 mm tubes

  • Shaker Attachments & Stirrers

    IKA Works

    …Erlenmeyer flasks. Fixing clips must be ordered separately. The AS 130.4 test tube support is for small tubes, test tubes, cuvettes and centrifugal tubes that will undergo intensive shaking. The R 1300 dissolver stirrer provides radial flow for drawing the material to be mixed from the top to the…

  • Truebore, Precision Glass Tubing

    Ace Glass

    …for precision bore tubing of the highest quality, maintained by production techniques, careful selection of raw materials, and step-by-step quality control. Trubore tubing is used in ACE items such as our Trubore Stirrers and McLeod Gauges. See codes -90 thru -97 for our square precision tubing.

  • Dynabloc, Heating Blocks for Vials & Tubes

    Ace Glass

    …supplies low-cost, highly efficient, simultaneous stirring and/or heating of multiple samples contained within various sizes of small, vials and tubes. To anchor blocks to either a 145mm or 135mm diameter hotplate/stirrer, use our 13698-03 (145mm) or 13698-05 (135mm) base plate. To remove blocks…

  • Dynabloc, Segmented Heating Blocks for Vials & Tubes

    Ace Glass

    Three segment, anodized aluminum, heating/mixing blocks hold up to three different size and type of vessels at the same time. To anchor blocks to either a 145mm or 135mm diameter hotplate/stirrer, use our 13698-03 (145mm) or 13698-05 (135mm) base plate. To remove blocks when hot, use our 13698-09…

  • Bearing, Trubore, 10mm

    Ace Glass

    For use with Flask Head 9443. By using precision bore tubing throughout the length of the bearing, a stirrer is produced that will hold to within 1mm of vacuum and withstand pressures in the flask up to 300mm. The 9532 Agitator, used with this bearing actually develops a negative pressure of 230mm…

  • Stirrer, Vacuum, Debris Free

    Ace Glass

    Modified version of 8098 in that upper member is internally threaded on the top. Nylon bushing and O-Ring form a compression seal on stirring shaft in place of the conventional tubing arrangement. Easier to adjust shaft, suitable for vacuum work. For use with 8134 stirring shafts.

  • Bearing, Trubore, High Vacuum, 10mm

    Ace Glass

    This bearing is the standard liquid seal type except that the use of Trubore tubing enables this unit to perform very satisfactorily under high vacuum conditions. Use our precision ground stirring shafts (8068,8070,8071,8073,9532,9533).

  • Bearing, Trubore, Water Cooled, 5 & 6mm

    Ace Glass

    Jacketed, Trubore bearing with standard taper joint for use with our 9534, 9535 and 9541 precision ground stir shafts. Hose connections fit 5/16" or 3/8" ID tubing. Match bearing ID of 5 or 6mm to stir shaft OD.

  • Instatherm Block System

    Ace Glass

    9600-20 Complete system for heating and or mixing using Instatherm block, Instatherm bath, Ace temperature controller and ceramic-top magnetic stirrer. Design to handle 24 - 16mm OD tubes.

  • Rotary Evaporators, Diagonal Condensers

    Techne (Bibby Scientific US)

    …vapour tube for diagonal condenser, receiving flask 1000ml, Florentine flask 1000ml, feed tube with stopcock, vacuum seal, conical joint clip, spherical joint clip. Glass set RE300P is plastic coated version and consists of: Diagonal coil condenser plastic coated, vapour tube for diagonal…

  • Rotary Evaporators, Vertical Condensors

    Techne (Bibby Scientific US)

    …Vertical coil condenser, vapour tube for vertical condenser, receiving flask 1000ml, Florentine flask 1000ml, feed tube with stopcock, vacuum seal, conical joint clip, spherical joint clip. RE301P Glass set consists of: Vertical coil condenser plastic coated, vapour tube for vertical condenser,…

  • Cell (Cuvette) Spinbar® Magnetic Stirring Bars

    Bel-Art Products

    …measurements can proceed uninterrupted while reagents are added One-piece molded unit will not scratch cuvettes; may also be used in test tubes Alnico magnet encapsulated in FDA Grade, USP Class VI Teflon® PTFE low friction coating; durable and inert Manufactured in a registered…

  • Congealing Termperature Apparatus

    Ace Glass

    …with Ace-Threds in place of rubber stoppers, where practical. #50 thread at center holds a test tube with a #25 bushing, open top test tube utilizes a rubber stopper to secure a thermometer and wire stirrer, #7 Ace-thred thermometer port on one side, 22mm I.D. opening on the other side to access the…

  • Slip Stop 6"X16" Piece

    Dynalon

    …to safety by reducing breakages and easing stress at the workbench. In laboratories, Slip Stop can be used on shakers and stirrers to hold flasks, test tubes etc. safe and secure without the need for clamps. The mats can also be used to provide added product stability and safety for your…

  • Bearing, Trubore, Water-Cooled, 10mm

    Ace Glass

    …our 8119 high-speed lubricant. Can be operated at 1500 rpm unevacuated using our 8117 Stir-Lube. Hose connections for use with 5/16" or 3/8"ID tubing. Available with PTFE clad joint to eliminate the need for grease. Use with our precision ground stirring shafts (8068,8070,8071,8073 ,9532,9533).

  • iTrite Electronic Digital Motorized Bottletop Burettes

    Scilogex

    …module. A magnetic stirrer is included in the package which connects to the TFT display module via USB, providing excellent mixing during the titration. Choose from either the fixed position titrating nozzle or the included adjustable titrating nozzle with flexible tube. A recirculation feature…

  • pH Meters Accessories/Replacement Parts

    Hach

    …2nd stirrer. Flasks for Benchtop pH CAL, 3 x 50 mL Set of 3 x 50 ml printed flasks for bench-top pH-meters calibration, yellow labeled pH7 Flasks for Benchtop Conductivity Meters Calibration Set of 3 x 50 ml printed flasks for bench-top conductivity meters calibration. Tubes

  • Accessories for TitroLine® & TITRONIC®

    YSI

    …Thomas No. 1165W19 Tube set, 3-part, without titration tip and shaft. Thomas No. 1165W20 Sucking tube, Sucking tube valve <-> reagent bottle. Thomas No. 1165W21 Dosing tube, Dosing tube, 0.5 m Thomas No. 1165W22 Connection tube, Connection tube valve <->…

  • Photochem Reactor, Plain & Jacketed

    Ace Glass

    …joint is 60/40. Bottom of reactor is flat to allow use of stirrer magnet. Volumes indicated are total volumes. Volume in reactive area of lamp is approx. 40-50% of total volume. Available with vessel plain or jacketed. Complete consists of vessel, sparger tube, magnet, bushing, and PTFE tubing.

  • Photochem Reactor, Jacketed, Stopcock Bottom

    Ace Glass

    …accommodate the immersion well. With one 14/20 angled joint for sparger tube, one 24/40 vertical joint for condenser and one #7 Ace-Thred side arm for thermometer. Center joint is 60/40. Bottom is flat to allow use of stirrer magnet if desired. Volumes indicated are total volumes. Volume in reactive…

  • Instatherm Blocks

    Ace Glass

    …the rapid and precise temperature control of Instatherm with the safety of aluminum heating blocks. You may stir using a hot plate stirrer, however do not apply heat to the bath. See our 9600-20 complete heating system which features our 12125-32 economy temperature controller and Cimarec stirrer.

  • Dynabloc, Heating Blocks for Flasks

    Ace Glass

    The DynaBloc heating system supplies low-cost, highly efficient, simultaneous stirring and/or heating of multiple samples contained within various sizes of small, round bottom flasks. To anchor blocks to either a 145mm or 135mm diameter hotplate/stirrer, use our 13698-03 (145mm) or 13698-05 (135mm)…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.