Tube Opener

Compare Tool

Select up to 3 products

Tube Opener
1 - 32 of 594
Sort
View
Show


  • Dimensions: 79mm (3-1/8") long Easily open all sizes of microcentrifuge tubes with just one hand One end opens 1.5 to 2.2ml tubes, forked blade on opposite end opens smaller sizes: 250m, 400m, and 550m tubes

  • This ergonomic, hands-free microtube opener is your thumb's best friend. It fits your PIPETMAN® pipette perfectly and can open both snap-cap and screw-cap microtubes. Made of high quality polyacetal, THE JIMMY can be cleaned with alcohol or sterilized by autoclaving. It is sold in a set of…

  • 5ml Sterile Transport Tube

    Globe Scientific

    …feature clearly printed graduations and white writing surfaces. Tubes are manufacturered from virgin polypropylene. Screw caps are polyethylene (PE) 2-1/4 turn thread design for super fast opening and closing Tubes are self-standing with conical bottom (5mL) or round bottom (10mL) …

  • Posi-Click™ 2.0 mL Microcentrifuge Tubes

    labForce® (a Thomas Scientific Brand)

    tubes feature a small, easy-to-open/close cap with the assurance of an audible "click" to know that your sample is secure. Boilproof Fits all standard 2.0mL centrifuge rotors, racks, and storage boxes Graduated every 100µL for easy volume identification Small cap allows tubes

  • Cap Opener for 0.5, 0.65, 1.5, 1.7 and 2.0mL snap cap microcentrifuge tubes. Autoclavable (122°C) Polypropylene. 5 per bag/10 bags per case Made in USA

  • PCR Multi-tool for opening and closing tubes and strip tubes.  Also good for applying films.

  • Posi-Click™ 5 mL Microcentrifuge Tubes

    labForce® (a Thomas Scientific Brand)

    tubes feature large, easy-to-open/close cap with the assurance of an audible "click" to know that your sample is secure. Boilproof Fits all standard 5.0mL centrifuge rotors, racks, and storage boxes. Designed to fit all rotors, racks, and storage boxes that fit 5mL or 15mL tubes; no…

  • Micro Tube Tool

    Bio Plas

    …Helps prevent fatigue of fingers and thumb This innovative tool makes it easy to open tight-fitting Snap Caps, and it lets you remove Screw Caps while tubes are still in the rack. A convenient way to put an end to difficult opening of Screw-Cap Tubes and any size Snap-Cap Microcentrifuge Tubes.

  • These centrifuge tubes have been designed specifically for urinalysis procedures. They feature a flared opening which is designed to simplify pouring off. Tubes offer a maximum RCF of 1500 g.

  • …collection tubes and up to eight (8) 15mL tubes. All adapters are included. Programming allows for setting by either speed or G-force. A quick spin function enables easy spin downs when a timed program isn't necessary. The added safety of an electric locked lid ensures users don't open

  • Universal Tube Rack

    Heathrow Scientific

    …Quickly change tube sizes with this adaptable polypropylene rack. Open the iris with a turn of the knob or directly insert a tube into the opening. Holds up to 12 similar size tubes. Imprinted references for easy identification. Generously-sized handles for easy transport. Accepts tubes from 15mL to…

  • …x 43mm H (5.08" x 4.15" x 1.70") Available in 2 sizes to hold either 0.5 or 1.5ml tubes. Open sides, ideal for use in a tray of crushed ice. Easy to assemble. 1226C36: holds tubes: 0.5 mL micro, places: 63, rows: 7 x 9 1226C37: holds tubes: 1.5 mL micro, places: 42, rows: 6 x 7

  • Foam racks for test tube storage and protection during shipping These economical, charcoal gray, open-cell foam racks have a capacity for 50 tubes in a wide range of sizes. Ideal for storage on benchtops, in incubators and refigerators/freezers. Racks will float for use in waterbaths. Can be…

  • …x w x h) : 10.562x4.75x1.812in Microcentrifuge Tube Racks, Polypropylene. Yellow. For 1.5 micro test tubes. Can accommodate 50 micro tubes with lid open (without interfering) or 100 micro tubes with lid closed or without lids. Racks are stackable even when completely loaded with test tubes.

  • Each workstation securely interlocks with Cryoclear™ self-standing tubes for one-handed opening and closing of caps. 40-place (10 x 4 format) Produced from Polycarbonate (PC) with anti-slip rubber feet Autoclavable at 121°C, 15 psig for 20 minutes Temperature range:…

  • … Frosted writing area on tubes and caps Freezable to -80°C Thomas microcentrifuge tubes are designed to provide secure, leakproof seals while remaining easy to open. Polypropylene tubes are autoclavable to 120°C at 15 psi for 15 minutes. 1.5 mL tubes are graduated at 0.1, 0.5,…

  • …cartridge. Blood collection tube dispenser for Point of Care testing instruments Dispenses blood drops easy with no need to open collection tubes Dispenses one drop of blood onto test cartridge or cassette Fits standard glass or plastic blood tubes with rubber stoppers Polystyrene…

  • Erase fatigue when opening and closing large numbers of microtubes.

  • Traditional Open Blast Extractor (Comes with 1 yr. Limited warranty, excludes gaskets and screens) The solvent can will fit into the top cap hole Includes: Platinum Cure Silicone Non Stick Pad 304 Stainless Material Tube 304 Stainless Top Cap w/ 3mm Hole (Fits Most Butane…

  • Open Blast Extractors

    Best Value Vacs

    Traditional Open Blast Extractor (Comes with 1 yr. Limited warranty, excludes gaskets and screens) The solvent can will fit into the top cap hole (Rated to 500psi, Working pressure will only reach 20 PSI when using solvent cans) Sanitary Grade 304 Stainless Steel Tube Fittings 150 Micron…

  • …ensures excellent temperature homogeneity Highly effective water bath Recommendations Make your choice of racks to suit your test tubes Open Circulating Baths are widely used in laboratories Suitable for any application and kind of sample that involves water bath

  • …handle specimens. The stopper that seals the tube is covered by a plastic shield to help protect lab personnel from contact with blood on the stopper or around the outer rim of the tube as well as from blood spattering when tube is opened. The rubber stoppers are recessed inside the shield,…

  • …minimize contamination, material hang-up and loss. Screw cap is made of the same material as tube Convenient - Molded ridges on tubes match serrations on racks (Cat. No. 4214), so tubes may be opened with one hand. Upright models stand without a rack. Seamless, conical design lets you extract…

  • Backspring Centrifuge Tubes

    Argos Technologies

    tubes have been designed to reduce repetitive stress syndrome caused by repeatedly opening and closing microcentrifuge tubes. The BackSpring’s unique design allows the user to open the tube from the back; versus the traditional front open style. Pivot design allows the tube to snap open when…

  • USP VI grade PP material, free from heavy metal RCF: 30000xg Endotoxin: 0.1EU Clear graduations and frosted marking area Special cap design to insert needle Easy opening and closing Autoclave at 121°C/15 psi Temperature range: -80 to +121°C DNase/RNase-free

  • …seal will not come open during processing yet will open easily with a little thumb pressure. All caps have a textured writing surface on top with a needle access target in the center. The 1.5 mL and 2.0 mL tubes have an additional textured writing surface on the side of the tube. G-Tubes are…

  • Posi-Click™ Low-Binding Microcentrifuge Tubes

    labForce® (a Thomas Scientific Brand)

    Low-Binding Posi-Click™ Graduated Microcentrifuge tubes feature a small, easy-to-open/close cap with the assurance of an audible "click" to know that your sample is secure. Proprietary low-binding or low retention resin maximizes sample recovery Boilproof Fits all standard 0.5,…

  • Tube Revolvers

    Crystal Technologies

    …Automatic stop when lid is opened. Digitally controlled, precise rotating speed. Fits a variety of tubes with included accessories. CTI's tube rotor is an ideal instrument for numerous applications where high efficiency and consistent mixing are needed. Tube rotors are available in…

  • Amplifyt® Individual PCR Tubes

    labForce® (a Thomas Scientific Brand)

    Individual PCR tubes feature evaporation-resistant, easy-to-open-and-close lids that prevent sample loss. Ultra-thin, uniform wells ensure optimal heat transfer and reaction efficiency. Dome, frosted flat, or optically-clear caps for qPCR (real time). Conveniently packaged in…

  • …(4”) or 178mm (7”) with open or closed top caps. NorLoc™ caps have superior holding and sealing capabilities with eliminate either cap or tube failure in your instrument. The patent pending design incorporates a blue band positioned on the tube that aligns with the base of the cap,…

  • Posi-Click™ Small Cap Microcentrifuge Tubes

    labForce® (a Thomas Scientific Brand)

    tubes feature a small, easy-to-open/close cap with the assurance of an audible "click" to know that your sample is secure. Boilproof Fits standard centrifuge rotors, racks, and storage boxes Graduated every 100µL for easy volume identification Small cap allows tubes to be…

  • Posi-Click™ 0.6 mL Microcentrifuge Tubes

    labForce® (a Thomas Scientific Brand)

    tubes feature a small, easy-to-open/close cap with the assurance of an audible "click" to know that your sample is secure. Boilproof Fits all standard 0.5mL centrifuge rotors, racks, and storage boxes Graduated every 100µL for easy volume identification Small cap allows tubes

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.