Tube Opener

Dimensions: 79mm (3-1/8") long Easily open all sizes of microcentrifuge tubes with just one hand One end opens 1.5 to 2.2ml tubes, forked blade on opposite end opens smaller sizes: 250m, 400m, and 550m tubes

PCR Multi-tool for opening and closing tubes and strip tubes.  Also good for applying films.

… Frosted writing area on tubes and caps Freezable to -80°C Thomas microcentrifuge tubes are designed to provide secure, leakproof seals while remaining easy to open. Polypropylene tubes are autoclavable to 120°C at 15 psi for 15 minutes. 1.5 mL tubes are graduated at 0.1, 0.5,…

Erase fatigue when opening and closing large numbers of microtubes.

Tube is manufactured from borosilicate glass and packaged 100 tubes per vial. The Code -02 has a smaller I.D. to conform to U.S.P XXI requirements.

This ergonomic, hands-free microtube opener is your thumb's best friend. It fits your PIPETMAN® pipette perfectly and can open both snap-cap and screw-cap microtubes. Made of high quality polyacetal, THE JIMMY can be cleaned with alcohol or sterilized by autoclaving. It is sold in a set of…

…Helps prevent fatigue of fingers and thumb This innovative tool makes it easy to open tight-fitting Snap Caps, and it lets you remove Screw Caps while tubes are still in the rack. A convenient way to put an end to difficult opening of Screw-Cap Tubes and any size Snap-Cap Microcentrifuge Tubes.

…ensures excellent temperature homogeneity Highly effective water bath Recommendations Make your choice of racks to suit your test tubes Open Circulating Baths are widely used in laboratories Suitable for any application and kind of sample that involves water bath

…seal will not come open during processing yet will open easily with a little thumb pressure. All caps have a textured writing surface on top with a needle access target in the center. The 1.5 mL and 2.0 mL tubes have an additional textured writing surface on the side of the tube. G-Tubes are…

Traditional Open Blast Extractor (Comes with 1 yr. Limited warranty, excludes gaskets and screens) The solvent can will fit into the top cap hole (Rated to 500psi, Working pressure will only reach 20 PSI when using solvent cans) Sanitary Grade 304 Stainless Steel Tube Fittings 150 Micron…

Traditional Open Blast Extractor (Comes with 1 yr. Limited warranty, excludes gaskets and screens) The solvent can will fit into the top cap hole Includes: Platinum Cure Silicone Non Stick Pad 304 Stainless Material Tube 304 Stainless Top Cap w/ 3mm Hole (Fits Most Butane…

…x 43mm H (5.08" x 4.15" x 1.70") Available in 2 sizes to hold either 0.5 or 1.5ml tubes. Open sides, ideal for use in a tray of crushed ice. Easy to assemble. 1226C36: holds tubes: 0.5 mL micro, places: 63, rows: 7 x 9 1226C37: holds tubes: 1.5 mL micro, places: 42, rows: 6 x 7

…Quickly change tube sizes with this adaptable polypropylene rack. Open the iris with a turn of the knob or directly insert a tube into the opening. Holds up to 12 similar size tubes. Imprinted references for easy identification. Generously-sized handles for easy transport. Accepts tubes from 15mL to…

… Microcentrifuge Tube Racks. Polypropylene . Available in Red or Blue. For 1.5 ml micro test tubes. Can accommodate 50 micro tubes with lid open (without interfering) or 100 micro tubes with lid closed or without lids. Racks are stackable even when completely loaded with test tubes.

…Automatic stop when lid is opened. Digitally controlled, precise rotating speed. Fits a variety of tubes with included accessories. CTI's tube rotor is an ideal instrument for numerous applications where high efficiency and consistent mixing are needed. Tube rotors are available in…

These PYREX® gas dispersion tubes have a 30mm diameter extra coarse porosity (170 to 220µm) fritted disc and are used to disperse or scrub gas in liquids. The size of gas bubbles depends upon the porosity of the fritted disc and the liquid used. The finer porosity discs give smaller…

…x w x h) : 10.562x4.75x1.812in Microcentrifuge Tube Racks, Polypropylene. Yellow. For 1.5 micro test tubes. Can accommodate 50 micro tubes with lid open (without interfering) or 100 micro tubes with lid closed or without lids. Racks are stackable even when completely loaded with test tubes.

This polyethylene rack will hold six test tubes, and has six drying pins. Sides are fully open for clear viewing. Rack has two 30mm and four 20mm holes, and is pre-assembled.

…and secure positioning of 1.5, 2.0, and 5.0 mL microcentrifuge tubes in automation workflows. The tube is held securely in the open position, with the cap located in the adjacent slot to prevent interference. Two models available: 1.5 and 2.0 mL version holds 24 tubes 5.0 mL version holds 12 tubes

…contamination risk •External threading •Free-standing •Star-shaped bottom for easy opening in tube racks •Graduated with large writing surface •Recommended for vapor phase LN2 storage Synonyms: cryo tubes Legal Information: TPP is a registered trademark of TPP Techno Plastic Products AG

All tubes have a frosted marking spot and engraved graduations Attached flat top cap is easy to open and close with one hand 1.5mL opaque black tube protects light sensitive compounds

…polyethylene bags are made from virgin materials, so they comply with USDA and FDA requirements for use in food applications. Made from seamless tubing with no slits or side seals that can rip Bags 15" wide and under come in dispenser packs of 100 for cleanliness and convenience Meet…

Screw Compressor Clamps are used to control the flow in flexible tubing. The clamps have a machined adjustment screw to permit accurate regulation of the flow. All corners are rounded to prevent cutting of the tubing. The clamps feature brass construction that is plated for corrosion resistance and…

These tubes are designed for use with Teledyne Tekmar 2016/2032 Autosamplers and 4100/4200 Automatic Samplers that are equipped with 3/4” diameter mounts. The opening of these disposable tubes is larger and it permits easier sample loading and facilitates the weighing of solid and soil…

…ensure the sample is eluted Middle cross section allows you to strain the swab tip minimizing the potential of dripping when removed A connected cap fits snuggly into the tube providing an airtight seal. A small opening in the cap allows for optimal control over the flow of droplets released

… These Simport Centrifuge Tubes offer superb quality and performance at an affordable price. They feature an extended lip for easy opening. Marked graduations and frosted labeling panels on tube and cap for easy writing and identification. These Simport centrifuge tubes withstand centrifugal forces…

…contamination. Place tubes in slots and slide under tabs to keep tubes from opening when under pressure, submerged or knocked over. Patent pending. Immobilizing tabs prevent tube tops from popping open during boiling Holds up to twelve 1.5ml or 2.0ml microcentrifuge tubes in numbered…

…is recommended for research labs that routinely clean NMR and EPR tubes; a single unit can accommodate up to 5 tubes (3, 4 and 5 mm OD) at once. When an inverted tube is inserted onto the solvent transfer tubing and the open end is immersed under wash solvent in the solvent cup, a reliable…

…Control of Samples Open style floating rack provides tubes with maximum contact with the water and better circulation of the water bath around the tubes, allowing superior temperature control of samples. Work on the benchtop, float in the water bath Tubes are held tightly in rack…

Unique tabs keep tubes in place and caps closed to protect your samples from loss and contamination. Patent pending   Prevent tube tops from popping open during boiling Holds up to twelve 1.5ml or 2.0ml microcentrifuge tubes in numbered locations Fits most 1000ml beakers …

…Polypropylene construction provides good chemical and thermal resistance. Autoclavable. Racks feature a 3/4" x 2-3/4" labeling area on two sides. Open design allows easy viewing of contents from all sides.Available in sizes that hold 13mm or 16mm tubes. Both racks feature a 6 x 6 array of holes.