Tube Cooler

… 12-place test tube cooler Maintains temperature for up to 5 hours Keeps reagents, enzymes and other biological samples cool on the bench top. Coolers have a gridded and keyed lid to help maintain proper orientation and inventory on tubes. Coolers accommodate tube height up to 125 mm…

…inserts to convert 1.5-ml holes to accept 0.2- to 0.5-ml microcentrifuge tubes. Excellent for transporting samples in vacutainers in hospitals and clinics. Coolers accommodate tube height up to 125 mm when lid is latched. Both accommodate cryogenic vials and 0.2- to 2.0-ml microcentrifuge tubes.

…centrifuge tubes up to 125 mm tall. A non-toxic freezing gel is isolated within the walls of the cooler, ensuring that any labels or marks on the vials or tube are not damaged. The indexed and transparent polycarbonate lid shows tube location and matches locations printed on the cooler. Coolers can…

…Cooler has a capacity of 32 x 1.5 mL tubes and weighs 1.2 kg. The StrataCooler provides protection for your enzymes in the freezer or on the benchtop. It maintains -15 °C for at least 2 hours on the benchtop. The StrataCooler cryo preservation module is offered with the benchtop cooler, and…

…Maintains freezer temperature Break-resistant polycarbonate Holds twenty 1.5 or 2.0 mL microcentrifuge tubes or Cryotube™ vials. Inserts are included to accommodate 0.2 to 0.5 mL tubes. Protects enzymes, cells, reagents and solutions by maintaining freezer temperatures while on the…

…coolers Accomodates 0.5 and 2.0 mL microtubes or cryovials 5152M16 maintains temperature below -15°C for two hours and 5152M18 maintains it for one hour. Blue polycarbonate lower section is filled with a non-toxic gel. Includes 16 inserts for converting 1.5 mL holes to accept 0.5 mL tubes.…

…place the CoolCube in a freezer overnight and it’s ready for use, keeping samples cool and safe at the bench without messy ice buckets or wet tubes. One side of the CoolCube can be used as a PCR workstation with wells for 12 standard 1.5/2.0ml microtubes and one 96 well PCR plate or 0.2ml…

… PC 3 Peltier Cooler and Power Supply Baffled Quartz Cyclonic Spray Chamber with Addition Gas Port (N8145120) PFA-ST MicroFlow Nebulizer (N8122192) 1.5 mm I.D. Quartz Injector in PFA Base (N8122413) 0.15 mm I.D. Sampling Tubing, 1 m (N8122384) 0.25 mm I.D. Sampling Tubing, 1 m (N8122383) 0.5…

…includes: PC³-LT Peltier Cooler and Power Supply Baffled Quartz Cyclonic Spray Chamber (N8145402) PFA-ST MicroFlow Nebulizer (N8122192) 0.15 mm I.D. ST Sampling Tubing, 1 m (N8122382) 0.25 mm I.D. ST Sampling Tubing, 1 m (N8122383) 0.5 mm I.D. ST Sampling Tubing, 1 m (N8122384) Tee Connector…

…MiniFridge II. These fit Minifridge II (5152M25 and M30). Combination block, Thomas number 0241D35 holds three tubes up to 25 mm, five tubes up to 13 mm and six tubes up to 6 mm. Mini Size Cooler Blocks (5152M80, M85 and M90) Blocks are 2 1/8 x 3 1/4” x 1 1/2”. These fit Polar Block II (5152M45…

…Mini Coolers can also be used for controlled freezing of samples longer temperature retention. Polycarbonate construction with rubber non-slip feet Gridded and keyed one-position lids for easy sample identification 0.5 mL tube adapters supplied as standard with the 0.5–2.0 mL tube size…

…Peltier Cooler & Power Supply, Qty. 1 Baffled Quartz Cyclonic Spray Chamber with Oxygen Port, Qty. 1 2.0 mm I.D. Quartz Injector in Cassette-Type Torch Mount, Qty. 1 PFA Nebulizer with Threaded Connector PharMed ® Pump Tubing (Double Grey Marked), Qty. 4 Flanged PTFE Drain Tubing (Double…

…refrigeration units Power consumption of only 250 watts Simple to operate with low maintenance Cooling fans are the only moving parts CBC bath coolers consist of a thermoelectric cooling unit and a separate power supply. Unit can be installed easily onto any bath with a two inch diameter…

…Injector PFA-ST MicroFlow Nebulizer (N0777049) 0.5 mm I.D. ST Nebulizer Capillary (N8122384) 0.25 mm I.D. ST Nebulizer Capillary (N8122383) 1 mm I.D. Convertible Quartz Injector Three Piece Mounting Shelf (N0786023) 0.76 mm I.D. Solva Pump Tubing, Qty. 4 1.14 mm I.D. Solva Pump Tubing, Qty. 4

The Double Chamber fits two 96-well PCR trays or individual tubes and strips. Each edge can accommodate up to (12) 0.5ml and (8) 1.5ml tubes. Great for temperature sensitive liquid transfers. It measures 6 3/16 x 6 1/2 x 1 inches. NOTE: Does not fit CoolSafe System; use separately

…prepare PCR reactions Samples remain at 0°C for over one hour Color changes above 7°C This low-profile cooler holds 96 0.2 mL or 0.5 mL tubes at a temperature between 0°C and 7°C for approximately two hours (at an ambient temperature of 22°C). Unit changes color…

…Tubing, 1 m (N8122382) 0.25 mm I.D. PFA Sampling Tubing, 1 m (N8122383) 0.5 mm I.D. PFA Sampling Tubing, 1 m (N8122384) Tee Connector for Mixing Oxygen and Make-Up Gas, 50 cm Make-Up Gas Line and Fittings, 80 cm Oxygen Gas Line and Fittings (N0777556) Santoprene ™ Peristaltic Pump Tubing…

…microcentrifuge tubes Sealed-in insulation material Molded polystyrene box, with cover, will maintain a temperature of -15°C for 1.5 hours (below 0°C for up to four hours) when taken out of a -20°C freezer. Internal 12-place support for 1.5 mL microcentrifuge tubes is…

…Dry incubation technology reduces contamination risk associated with classical icebath incubation for safe sample handling Holds up to 24 micro tubes (e.g., 0.5 mL or 1.5 mL/2.0 mL) for broad flexibility Two versions of IsoPack (cold pack) available: White maintains 0°C for up to 6 hours.…

…rises above 7°C. Racks include an alphanumeric grid for organizing samples. Available in a 24-place option (6 x 4 array) that holds 1.5 mL to 2 mL micro tubes and six 0.5 mL micro tubes using an included adapter and a 96-place option (12 x 8 array) that holds 0.2 mL PCR tubes or strips.

The TX150 - R4 is available as a kit with the circulator, refrigeration unit and insulated tubing and clips to form a system ready to use.The Grant Optima™ LTC4 Kit includes TX150 heating circulator and R4 tank/refrigeration unit: TX150-R4 20 litre tank with drain tap …

Easy to use compact benchtop immersion cooler in combination with water bath. Performance and functions Cools down water bath immediately by dipping cooling coil into fluid Improved safety by adopting overcurrent circuit breaker Spiral tube of BE201 changed from copper to chrome…

…plate, strip wells or 200ul tubes. The XT Starter M-PCR Kit includes one XT Holder base, one XT Cooling Core and a CoolRack® M-PCR module which holds 12 x 1.5ml or 2ml microcentrifuge tubes and 6 rows of PCR strip wells. XT Starter is an open platform cooler that keeps samples at a uniform…

…directed to the lens, not in workers' eyes. Workers stay cooler and more comfortable. Eliminates lens fogging; eyes do not dry out Replaceable sweatband - Wicks away moisture. Increased worker comfort Quick lock attachment on breathing tube - Easy to remove yet held securely in place during…

…loaded with features and improvements, such as higher speeds for faster and cleaner separations, quieter operation, lower chamber temperatures for cooler test-tube samples, and auto-calibrating function for precision speeds. It even has an auto-brake to stop the rotor in less than 20 seconds to save…

…inner glass surface allow a complete and uniform thin film on the heated surface, and prevent process residue  Pre-installed cooling/heating tubing with fluid direction labels and M16 ports  Low-placed feeding flask for ease of operation  Driving motor with magnetic coupling…

Tubing is same diameter as reinforcing rings on the standard taper joint. The rings permit penetration by the clamp cushioning material, and permit firm support without the need for excessive pressure on the joint; also, strain on the joint is reduced from expansion due to temperature increase.…

Heidolph accessories including circulating condensor, two-stage diaphragm vacuum pump, vapor tube, guard hood, guard shield, sensors, remote control, foam break adaptor, Woulff bottle, condensate cooler, and powder flasks, etc.

…0° coolers should be frozen for 24 hours at -5°C to -10°C before use, while the -20° Coolers should be frozen for 24 hours at -20°C to -25°C before use. The new Globe Rapid Chiller provides rapid cooling up to 12 biological samples in 1.5mL & 0.5mL tubes. This…

…cooler. Jacket is cylindrical with flat bottom for greater stability. With #25 Ace-Thred center neck and three 14/20 side necks. Code -35 includes our 7506-10 #25 Ace-Thred bushing used to secure a 9852-41 slide adapter (not included). 250ml capacity with hose connections for 3/8in ID tubing.

…cooler. Jacket is cylindrical with flat bottom for greater stability. With #25 Ace-Thred center neck and two 14/20 side necks. Code -30 includes our 7506-10 #25 Ace-Thred bushing used to secure a 9852-41 slide adapter (not included). 10ml to 50ml capacity with hose connections for 3/8in ID tubing.

…cooler. Jacket is cylindrical with flat bottom for greater stability. With #25 Ace-Thred center neck and two 14/20 side necks. Code -27 includes our 7506-10 #25 Ace-Thred bushing used to secure a 9852-41 slide adapter (not included). 3ml to 10ml capacity with hose connections for 3/8in ID tubing.