Thread Adapter

Compare Tool

Select up to 3 products

Thread Adapter
1 - 32 of 235
Sort
View
Show
  • …barb adapter fits 3 size hose diameters and improves stability Polyethersulfone (PES) membrane for high flow and low binding Two membrane pore sizes: 0.22µm or 0.45µm Filter systems include bottle top filter and solution bottle with cap Bottle top filters fit standard 45mm threaded solution…

  • …to even further improve upon the safety, conservation, and productivity features of these popular bottletop dispensers. Bottletop Thread Adapters Manufactured from PP and ETFE, these thread adapters help to maximize the compatibility of BRAND bottletop dispensers with most reagent bottles.

  • Thread Adapters

    Bürkle

    We offer a broad range of thread adapters. This facilitates the secure connection of many of our pumps and discharge cocks to a variety of containers. You will always find the correct connection thanks to the combination of different adapters.

  • Calibrex Dispenser Adapters

    DWK Life Sciences (Wheaton)

    Calibrex 520 and 521 Bottle Top Dispensers come standard with a 32 mm screw thread, and included with each dispenser are three polypropylene bottle neck adapters (28, 40, and 45 mm for the 520 model; and 38, 40, 45 mm for the 521 model)

  • PTFE connecting adapters and glass conversion adapters for connecting GPI threaded vials to a rotary evaporator vapor tube or trap. Both are suitable for vacuum work. PTFE connecting adapters are available with FETFE or Chemraz o-rings. Order Chemraz if you are using Methylene Chloride or Acetone.…

  • …using a CG-1318 Threaded Connector. Design incorporates a drip tube sealed within thread to prevent breakage and are supplied with a 2-1/2 " PTFE delivery stem. Hose connection is 10mm OD at the largest serration. ADAPTERS ARE SUPPLIED WITH PTFE DELIVERY STEM. Adapter with tooled flare…

  • …to sealed or moisture-sensitive systems. With inner joint at bottom and two outer joints externally threaded for an O-RING-CAP-SEAL connection with mating male joints. Supplied with two threaded caps with hole, two PTFE-faced silicone rubber septa and two O-Rings. For replacement caps, see 9590-45,…

  • THREADED ADAPTER 2'' 1PC

    MilliporeSigma

  • Bottle thread adapter converts bottles with S40 threads to be use with any GL45 thread caps.

  • Adapter Assembly with GL 45 Thread

    DWK Life Sciences (Kimble)

    This adapter assembly is designed to allow connection of a 47 mm or 90 mm filtration support base with a straight drip tip to a bottle or reservoir with a GL 45 thread. Filtrate is collected directly into a media-type bottle when using a standard membrane filtration assembly  

  • Black PEEK Threaded Adapter

  • Threaded End (UTS) Adapters

    Cadence Science

    Plated Brass or 316 Stainless Steel Meets ISO 594 Specifications Final assembly water tested at 45 PSI For industrial use only.

  • Threaded Microscale Connecting Adapters

    DWK Life Sciences (Kimble)

    Allows interfacing of inner Standard Taper jointed glassware with threaded microscale components Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

  • Threaded adapter accessory for opus®, solarus®, ceramus®, akku-drive® with recirculation.

  • Threaded adapter accessory for use with opus®, solarus®, ceramus®, akku-drive® with recirculation.

  • Universal Inlet Adapters with Screw Cap

    Wilmad-LabGlass - SP Scienceware

    Borosilicate glass universal inlet adapters are capable of sealing thermometers, syringes, pipets, etc. Insert probes can be positioned within the apparatus by loosening the screw cap on top of adapter and tightening to create a seal. Bottom of adapter features a Standard Taper joint. Supplied as a…

  • Threaded adapter, opus®, solarus®, ceramus®, akku-drive® with recirculation.

  • Threaded adapter accessory for opus®, solarus®, ceramus®, akku-drive® with recirculation.

  • Threaded End (NPT) Adapters

    Cadence Science

    316 Stainless or Plated Brass Meets ISO 594 Specifications Final Assembly water tested at 45 PSI For industrial use only.

  • Filtration Adapter Assembly

    DWK Life Sciences (Wheaton)

    Filtration adapter assembly makes it easier to connect standard 47 and 90mm filtration assemblies with stopper connections to a standard laboratory bottle with a GL45 thread Replaces the stopper to make the connection to the bottle A GL32 PBT cap with a PTFE faced silicone sealing ring makes…

  • Scienceware® PTFE Thermometer Adapters

    Bel-Art - SP Scienceware

    …joint and threaded top on which polypropylene nut is mounted. Central bore in body permits passage of thermometer, gases, etc. Viton® O-ring at top of joint seals against vessel. Inner top of body threaded to take thermometer adapter or vacuum adapter. Thermometer adapter has threaded cap with port…

  • Glove Box Threaded Adapter Kit

    Bel-Art - SP Scienceware

    …in the glove box, this threaded metal tube can be inserted for attaching needle valves or hose ends. Comes complete with nuts, gaskets and washers to ensure an airtight seal with the glove box Tube measures 6cm (2-1/2") long with a 3/8 - 27 thread on each end; allows for…

  • THREADED ADAPTER 2" S 1PC

    MilliporeSigma

  • Our PEEK, Standard, English Threaded Adapter is ideal for bringing together connectors with different threads. The P-653 has a Female 1/4-28 Flat Bottom to Male 10-32 Coned port configuration. It includes no fittings.

  • SlimLine™ Mop Adapters

    Micronova Manufacturing

    Micronova™ SlimLine™ Mop Adapters are lightweight flat head mop frame adapter that holds up to repeated use with strong disinfectants and steam sterilization. Available with eithter a stainless steel or plastic plate for attaching the mops. 360 degree swivel allows an easy glide…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.