Thermometer Clamp

Compare Tool

Select up to 3 products

Thermometer Clamp
1 - 32 of 45
Sort
View
Show


Thomas TraceableLive

  • clamps have fixed screw action and open to 5/8” (16 mm), for thermometers, burets, rods, etc. Jaws close down to completely shut. 8847T02 clamp has extension stem 5” x 1/4” diameter (125 mm x 6.4 mm); 8847T04 Clamp has male connector; 8847T06 has ball joint adapter. Medium clamps

  • Similar to the H-8950, this clamp has a phosphor-bronze spring clip attached to an aluminum rod-holding block for thermometers and 2 "v" notches designed to hold the H-1602 ring and stem assembly in an ASTM Softening Point Apparatus, but can be used to suspend other items, such as pitch cubes. The…

  • Holds glass tubes or thermometers from 6 to 13 mm diamter. Swivel lock adjusts from any angle through 360°. Distance from thermometer to support rod in 99 mm. Overall length is 122 mm. Integral post holders for easy connections.

  • With a full 360° jaw rotation, this fully adjustable clamp is ideal for attaching to rods up to 3/4" (19mm) in diameter. The clamp has an aluminum muff with steel thumbscrew and phosphor bronze jaws. The maximum distance from the jaw to the muff is 4-3/8" (111mm) and the overall length is 5-1/2"…

  • Like 2824B33 except with 12.5 mm extension rod. Holds 6 to 13 mm diamter objects up to 18 cm form support rod. Overall length is 21 cm. Requires clamp holder for attachment.

  • Clips for Beakers and Pitchers

    Bel-Art - SP Scienceware

    …polypropylene surface may be marked with identifying sequence numbers Autoclavable 0209X17: Thermometer Holder for Beakers Easy-to-use, polypropylene clips hold thermometers and probes from 3.2 to 11mm (1/8 to 7/16") in diameter securely in place. Fits onto the rims…

  • With five hole sizes ranging from 3.5mm to 14.5mm, this holder accommodates various thermometers including liquid in glass, electronic with probe, and bimetal with probe. The stainless steel, spring loaded clip attaches securely to laboratory containers, shelves up to 3/8” thick, and more.…

  • Digital and Magnetic Stirrers

    labForce (a Thomas Scientific Brand)

    …for maintaining the selected temperature in the sample within +/- 1°C. All models are compatible with borosilicate glass beakers and other vessels up to 20 liters (15 L maximum stirring volume). An optional clamp assembly (H3770-CS) is available for mounting thermometers, temperature probes, etc.

  • Digital and Hotplate Magnetic Stirrer

    labForce (a Thomas Scientific Brand)

    …maintaining the selected temperature in the sample within +/- 1°C. All models are compatible with borosilicate glass beakers and other vessels up to 20 liters (15 L maximum stirring volume). An optional clamp assembly (H3770-CS) is available for mounting thermometers, temperature probes, etc.

  • Wall Clamp

    Ohaus

    Self tapping screw clamp secures small object to wall when no frames are available. 58 mm long with jaws adjustable from 5 to 10 mm. Wing nut clamp holds thermometer or other small glass apparatus.

  • 17" Support Rod Kit is ideal for creating an adjustable support stand to mount various items such as thermometer clamps, temperature probes, flasks and column clamps. The kit allows users to mount a 17" vertical support rod to the deck of a 6" x 6", 8" x 8" or 10"…

  • …includes AC/DC Voltage and Current, Resistance, Capacitance, Frequency, Duty Cycle, Diode and Continuity Current measurements to 2000A through the clamp and 400mA via test leads Large 4000 count backlit display for high resolution and easy viewing in dimly lit areas Basic DCV accuracy of 1%…

  • SYNTHWARE Thermometer Clamp

    Kemtech America

    Thermometer Clamp, Synthware, Extension Rod Diameter: 10mm, Overall length: 200mm.

  • …steel. 17” Support Rod Kit is ideal for creating an adjustable support stand to mount various items such as thermometer clamps, temperature probes, flasks and column clamps. The kit allows users to mount a 17” vertical support rod to the deck of a 6” x 6”, 8” x…

  • …apparatus used for single determinations, asphalts, pitches, tars and most resins. Includes burner, beaker, support stand, 1 ring, wire gauze with ceramic center, thermometer clamp, 1 shouldered ring and stem with hardened steel ball. Order Thermometer separately. Meets ASTM D36, E28; AASHTO T53.

  • Suspends 6 to 13 mm thermometers over water bath. C clamp holder fits bath walls up to 9 mm thick. Overall length is 64 mm.

  • …ball method softening point apparatus used for single determinations, asphalts, pitches, tars and most resins. Includes hotplate, beaker, support stand, 1 ring, wire gauze with ceramic center, thermometer clamp, 1 shouldered ring and stem with hardened steel ball. Meets ASTM D36, E28; AASHTO T53.

  • …‘T’ connector; clamps do not obstruct scale. 8847T34 double buret clamp is similar to 8847T32, but with two single buret clamps mounted 4” (100 mm) apart on crossbar to simultaneously hold two burets, tubes, rods, thermometers, etc. 8847T36 clamp is similar to 8847T32 but for…

  • …Stainless-steel, spring-loaded clamp, rugged construction  Case size: 4¾ x3 1/3 x1¼  (12.2x8.5x3cm) Weight:  7 oz. (200g) Case:  Waterproof, high-impact, chemical-resistant ABS plastic, withstands chemicals Supplied:  Thermometer, stainless-steel…

  • Hook Clamp

    Humboldt

    The Clamp Hook locks into any position to support suspended thermometers, drying tubes and potash bulbs. The unit has an easy-adjusting check nut and has a 5-1/8" (130mm) maximum distance from center of muff to the hook. The minimum distance is set at 4-1/2" (114mm).

  • DC/AC Current True RMS Type K thermometer DC Zero Clamp-on multimeter with built-in non-contact InfraRed Thermometer Infared thermometer and rugged double molded housing Non-contact InfraRed Temperature measurements with laser pointer Peak hold captures inrush currents and Transients

  • Thermometer Stand

    GSC International, Inc.

    This polypropylene rack holds up to twenty-five of our standard-length (11.75" or 300mm) thermometers vertically and protects their tips from breaking. Thermometers are not included with this stand. PRODUCT WARNINGS Our products are not toys . Use in a laboratory or educational setting…

  • The CM65 clamp meter is designed for solar installation, maintenance, and troubleshooting professionals. Photovoltaic (PV) installers can trust this rugged solar clamp meter to accelerate and simplify PV panel testing at new and existing sites. The quick-connect MC4 test leads and…

  • …to 1500 MCM. For quick, point and shoot temperature readings, you can also use the non-contact IR thermometer with laser pointer for fast temperature checks or hot-spot detection. The FLIR CM78 amp clamp has a CAT IV-600V, CAT III-1000V overvoltage safety rating. NIST certification is available for…

  • …Band Clamps provide a unique and efficient clamping mechanism for objects of any shape and size. The same clamp can be used to handle a gallon container or fit snugly to hold a small thermometer, reducing the need to stock numerous clamp sizes and reducing time spent looking for the right clamp to…

  • …stirrers. 17” Support Rod Kit is ideal for creating an adjustable support stand to mount various items such as thermometer clamps, temperature probes, flasks and column clamps. The kit allows users to mount a 17” vertical support rod to the upper deck of a 6” x 6”,…

  • Conical 4" neck with three socket joints in line, plus a 14/35 outer joint for thermometer. Use 6496 Clamp for securing to flasks. For use with 6475, 6476, 6477, 6479, 6480, 6481, 6491, 6492, 6497, 6498 and 9656 ACE Reaction Flasks.

  • Conical 4" (10.2cm) neck for use with 6475, 6476, 6477, 6479, 6480, 6481, 6491, 6492, 6497, 6498 and 9656 ACE Reaction Flasks. Supplied with three outer joints in line, plus a 10/30 joint for a ground joint thermometer. Use 6496 Clamp for securing to f

  • Head, Duran Flange

    Ace Glass

    Flat ground flange for use with all Reaction Flasks that have a 100mm (4") Duran ground mating flange. Supplied with three in line ground joints and one or two 90 degree joints. For thermometer or probe adapter, see our 5028 series. For clamp, see 6517.

  • Head, Duran Flange

    Ace Glass

    Flat ground flange for use with all Reaction Flasks that have a 150mm (6") Duran ground mating flange. Supplied with three in line ground joints and one or two 90 degree joints. For thermometer or probe adapter, see our 5028 series. For clamp, see 6517.

  • Heat Radiation Apparatus

    GSC International, Inc.

    …the color of an object affects its ability to absorb or emit heat. The kit contains six different colored containers, six thermometers, and a heat lamp. Insert the thermometer into the top of each container and, as heat is applied from the lamp, the change in temperature is easily seen. How will the…

  • Temperature Controller

    Stuart (Cole-Parmer)

    …can be used either as a precise controller of temperature up to a maximum of 200°C or as a digital thermometer up to 325°C. The SCT1 temperature controller features an in-built clamp allowing the controller to be mounted either on a horizontal or vertical retort rod, providing flexible…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.