Thermocouple Adapter

Compare Tool

Select up to 3 products

Thermocouple Adapter
1 - 22 of 22
Sort
View
Show
  • Ace-Thred to standard taper adapter designed specifically for securing a thermocouple via a nylon bushing and PTFE ferrule.

  • Adapter has a Chem-Thread at the top to make a vacuum tight seal. It will accept our 1/8 or 1/4in OD thermocouple probes. Lower portion of the adapter is reduced down to hold the thermocouple securely in place and away from the agitators. Supplied complete with a Celcon cap and Viton o-ring.…

  • A special well fabricated from glass that is worked to a very thin wall for better heat transfer. Fabricated in two sizes for either 25mm or 76mm immersion, length of tube being measured from the bottom of the ground joint.

  • …1/4"; thermocouples. Adapter has an outer Viton® o-ring to form a grease-free, airtight seal between the adapter and the listed size of outer joint. The compression nut works in conjunction with the upper Viton® to provide a airtight seal between the adapter and thermocouple. Adapter

  • Anti-whip, glass adapter for protecting 1/4in OD probes within kilo scale reactors. Complete unit consists of a heavy, glass sheath topped with a 45/50 standard taper joint with a #25 Ace-Thred, one #25 nylon bushing with a #7 Ace-Thred tap and one #7

  • A 0-12mm Chem-Vac™ Chem-Cap® valve having an o-ring joint for connection to the right hand side of AF-0300-03 vacuum manifold. Adapter is available for #15, #25, and #30 o-ring joints. Complete gauge consists of a glass portion, a S.S. bushing drilled and tapped for 1/8 " NPT…

  • thermocouples. Adapter has an outer Perfluoro o-ring to form a grease-free, airtight seal between the adapter and the listed size of outer joint. The compression nut works in conjunction with the upper Perfluoro o-ring to provide a airtight seal between the adapter and thermocouple. Adapter design…

  • …precision thermocouple outputs for use in calibrating thermometers, transmitters, controllers or recorders Displays output in terms of millivolts or temperature based on thermocouple tables Mini thermocouple connector Large battery bank for extended work cycle External power adapter for…

  • Thermocouple Stabilizer for use with 1/2" diameter coated PT100 sensors. Glass filled PTFE 45/50 inner adapter has a 14mm compression fitting and an extension tube that extends below the joint to stabilize the probe when it is inserted into Chemglass 75 & 100L Reactors. The…

  • …into a reactor or primarily a temperature probe. The baffle will accomodate a 1/4-in OD thermocouple. The #7 Ace Thred bottom bushing will make a tight compression seal with either the tubing or thermocouple. Uses 5030 series adapters. Thermocouple not included, see 12140,12141 or 12135 probes.

  • …using any size of AF-0070 or AF-0071 adapters depending upon the size of flexible tubing being used. A #15 o-ring joint (G) is placed between the main and pre-trap to permit connection of vacuum measurement device via a AF-0306-01 thermocouple adapter. Both traps can be isolated from the manifold…

  • …vigreux indentations, while the 14/20 top outer joint has been eliminated. Temperature can be measured by using a 2-neck flask with a thermocouple or thermometer adapter. The delivery tube has two 2mm PTFE straight bore stopcocks that can be operated in a way to purge the receiving vessel with inert…

  • …share information with clients, and file instant reports. Product comes with DM285 FLIR meter, TA82 premium test leads, TA70 alligator clips, TA60 thermocouple probe with adapter, TA84 test lead holder storage/tripod accessory, 3 x AA Energizer batteries, and English-only quick start guide.

  • …or to mobile devices running the FLIR Tools app. Product comes with DM91 FLIR meter, TA82 premium test leads, TA70 alligator clips, TA60 thermocouple probe with adapter, TA84 test lead holder storage/tripod accessory, 3 x AA alkaline batteries, soft carrying case, and English-only quick start guide.

  • …terms of millivolts or temperature based on thermocouple tables Zero adjustment, auto zero when power on and change mode Standard banana I/O ports and mini thermocouple connector Large battery bank for extended work cycle External power adapter for continuous work cycle Complete with…

  • …Accepts interchangeable Moldatherm tube adapters Long-life Platinel™ II thermocouple(s) with 10ft. compensated lead wire and polarized plug Three Zone Models Three independent power circuits (zones) with independent thermocouples for control references Full…

  • …All baffles have 3/4" precision ground top and lower tubing for use with compression fittings and top jointed adapter. PLEASE NOTE: SEE CG-1971 FOR THERMOCOUPLE BAFFLES AND CG-1872 FOR pH ELECTRODES. †Designed and developed by John Korzun, Bristol Myers Squibb, New Brunswick,…

  • …gauge has fast response and high stability. Gauge is supplied either in a bench top case with handle or panel mount style. Gauge utilizes a 8-pin Hastings-Raydist DV-6M thermocouple gauge tube having a 10ft cord. Gauge tube is threaded with 1/8 " male NPT for use with AF-0306 adapter.

  • …maximum length with cable Adjustable data sampling rate Stores 99 readings manually and 20M readings via 2G SD card Type K/J Thermocouple input for high temperature measurements Large (9999 count) LCD displays Air Velocity or Air Flow and Temperature simultaneously Record/Recall…

  • …Can Be Vertically Adjusted Inside Reactor Hollow Baffles Allow Thermocouples From 1/8" to 1/4" In Diameter To Be Inserted Into The Reaction Complete Baffles Consist Of: Glass Baffle, Glass Fillted PTFE Adapter, And Lower PTFE Compression Fitting †Designed and developed…

  • Intelligent Heated Modules

    Vitl Life Science Solutions

    Adapters for the Ther-Mix and Flexi-Therm Vitl offers a range of interchangeable intelligent Heated Modules, used as adapters for the Flexi-Therm dry block heater and Ther-Mix heated laboratory mixer. Our Heated modules are a more efficient and accurate method of sample heating. They…

  • …meter), temperature output  terminal, time-up output  terminal, sample tray, external communication terminal (RS232C), external communication adapter, event output terminal, operation signal output terminal and furnace floor plate.  Temperature range 100°C or 1150°C. 

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.