Tfe Tubing

Compare Tool

Select up to 3 products

Tfe Tubing
1 - 16 of 16
Related Categories: Teflon Tubing | Ptfe Tubing
Sort
View
Show
  • Scienceware® Small Bore Teflon® TFE Tubing

    Bel-Art Products

    Teflon® PTFE plastic tubing can be ordered by the foot to suit your needs. Superior chemical resistance High degree of flexibility allows multiple twists and turns in tight spaces Non-stick surface will not collect particulates TEFLON® is a registered trademark…

  • 4' Tubing TFE For 2/5 / 10ml Dispenser

    DWK Life Sciences (Wheaton)

    4' fluoropolymer resin extension tubing. For 2, 5 and 10mL dispensers filling racked tubes or vials

  • 16 X 125 mm Tube, Culture, 15-415, TFE Lnr

    DWK Life Sciences (Wheaton)

  • 16 X 100 mm Tube, Culture, 15-415, TFE Lnr

    DWK Life Sciences (Wheaton)

  • Connectors, Tubing

    Ace Glass

    Small tubing connector comprised of a TFE, 1/4"-28 UNF 2B male nut and a Kel-F wedge insert. Designed for use with our 5838 Chromatography adapters, 1.5-2mm ID tubing won't slip off or blow out during vacuum or pressure applcations. Easily assembled wi

  • FEP NMR Tube Kit for Silicon NMR

    Wilmad LabGlass

    …this tube kit contains a silicone free FEP tube and 5mm OD glass adapter with two open ends. Use of a depth gauge to fine adjust position of the liner to ensure no glass protrudes in the Rƒ coil limit is suggested Rated for 500MHz experiments. Note: The FEP tube used in…

  • Distilling Adapter, Angled

    Chemglass

    …side neck. Adapter has a lower inner joint and two top outer joints. Lower stopcock is either a 6mm or a 10mm PTFE stopcock with a 1/2” or 3/4” OD distillate takeoff for use with a compression fitting and TFE tubing. PLEASE NOTE: ADAPTER CAN BE USED WITH COMPOUND ANGLED SIDE NECKS.

  • Distilling/Splitting Adapter

    Chemglass

    …directed using the valve to either the receiving flask or back to the reactor. Control valve is either a 0-4mm or a 0-12mm PTFE with a 1/2” or 3/4” OD distillate takeoff for use with CG-1975 compression fittings and TFE tubing. Plugs are supplied complete with CG-309 Perfluoro o-rings.

  • Distilling/Splitting Adapter, Angled

    Chemglass

    …flow is directed using the valve to either the receiving flask or back to the reactor. Control valve is either a 0-4mm or a 0-12mm PTFE with a 1/2” OD distillate takeoff for use with CG-1975 compression fittings and TFE tubing. Plugs are supplied complete with CG-309 Perfluoro o-rings.

  • Distilling Adapter

    Chemglass

    …has a lower inner joint and is available with one or two top outer joints. Lower stopcock is either a 6mm or a 10mm PTFE with a 1/2” or 3/4” OD distillate takeoff for use with a compression fitting and TFE tubing. Adapter is 6” overall wide with joints offset 95mm center to center.

  • Nalgene Polypropylene Straight Bore Stopcocks

    Thermo Scientific Nalgene

    Polypropylene with Teflon® TFE plug No lubrication required Offered in 2 mm and 4 mm bore sizes Arms are five-mm bore, serrated to take 1/4 to 7/16 inch rubber tubing

  • Scienceware® Fluo-Kem Teflon Tape

    Bel-Art Products

    Non-adhesive tape Teflon TFE Highly pliable and stretchable, for sealing, gasketing or lubricating Can be used as chemically-resistant cover for test tubes, etc. Heat-resistant, self-lubricating 1/2 inch wide In 300 inch spool

  • CHROMAFLEX® Flow Adapters

    DWK Life Sciences (Kimble)

    …a 20 micron porosity HDPE bed support, TFE/propylene o-ring seal, stainless steel adjusting rod, PTFE body, and 5 feet (1.5 meters) of FEP PTFE tubing Blue lock ring is supplied with all sizes except those that fit 1.0 cm column ID Use of aggressive organic solvents requires the PTFE bed…

  • Mp Delivery Cap

    DWK Life Sciences (Kimble)

    Three holes have 1/4-28 threads top and bottom with 1/8" I.D. holes through to accept 1/8" O.D. PTFE tubing. Body is PTFE. Supplied complete with three 1/4-28 CTFE plugs and a TFE/propylene o-ring.

  • HPLC Mobile Phase Cap And Reservoir Systems

    DWK Life Sciences (Kimble)

    …a TFE/ propylene O-ring. Connecting threads on top and bottom of the cap use 1/4-28 fittings. Supplied flangeless fittings (1/4-28) and adapters allow easy connections to any HPLC pump system. Systems include a three hole cap, conical bottom reservoir, standard fittings kit and PTFE tubing. NOTE:…

  • HPLC Mobile Phase Cap And Reservoir Systems

    DWK Life Sciences (Kimble)

    …Systems include the following: economy three hole cap; flat bottom reservoir; All PEEK Inlet/Sparge Filter (2 µm); two flangeless nuts, ETFE, 1/4-28, 1/8”; flangeless ferrules, ETFE, 1/8”; nut plug, ETFE, 1/4-28; FEP tubing, 1/8” o.d. x 1/16” i.d. x 10’ length; and an Instruction Manual.

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.