Test Tube With Cap

Compare Tool

Select up to 3 products

Test Tube With Cap
1 - 32 of 200
Sort
View
Show
  • Non-sterile Test Tubes, with Screw Caps

    Evergreen Scientific

    …bottom test tubes for general purpose laboratory work Screw caps included for storage and transport. Polystyrene tubes provide clarity and are appropriate for use with mild acidic (except oxidizing acids) or alkali solutions, alcohols (except higher alcohols) and salt. Polypropylene tubes are…

  • KIMAX Test Tubes with Teflon Liner Caps

    DWK Life Sciences (Kimble)

    Same as the 9210E23 series, but caps have Teflon ® overliner bonded to the rubber liner Listings indicate tube length x o.d. in mm

  • Screw Cap Test Tubes

    Globe Scientific

    These multipurpose screw cap test tubes are offered in convenient sizes to suit a variety of applications. The screw caps are designed to be leak-tight allowing the tubes to be used for storage or transport.

  • Kim-Kap Test Tube Caps

    DWK Life Sciences (Kimble)

    Polypropylene closure Autoclavable Natural For use with the KIM-RAK or other disposable culture tubes.

  • Falcon® Round Bottom Test Tubes

    Corning

    … 9219F28 tubes are wrapped individually; case contains 500. 9219F30 tubes are packed in bags of 25; case contains 20 bags. 9219F32 tubes are packed in bags of 125; case contains 8 bags. 9219F40 tubes are similar to 9219F32 tubes but without caps. Polypropylene, with Friction-Fit Caps (9219F60…

  • Test Tube Capper

    Bel-Art - SP Scienceware

    test tube caps. Test Tube Capper fits comfortably in the palm of your hand. Use tip to apply pressure and securely cap tubes. Capping can be performed with test tubes in a rack or while being held in the hand Designed for use with recessed center test tube caps Polypropylene with vinyl…

  • Diamond Culture Tube Caps

    Globe Scientific

    These popular caps fit plain end culture tubes and flasks with DeLong style necks or ports. The caps are molded from durable, autoclavable polypropylene (PP). They are available in a full range of five sizes and five colors for easy sample identification and organization. Recommended tube diameter…

  • PYREX® Screw Cap Culture Tubes with Phenolic Caps

    Corning

    These PYREX® culture tubes are supplied with phenolic caps to facilitate handling and sealing after autoclaving. Caps are fabricated from a special formula resistant to the effects of temperature and steam in autoclaving and are provided with a glued-in, white rubber liner. The white enamel…

  • Test Tube pH Pens

    Sper Scientific

    …standard test tubes 16x50mm or larger Highly stable and accurate readings with a large LCD display. Designed for simple one-hand operation. Automatically calibrates to pH 4, 7 and 10 buffers and can be adjusted to recognize any buffer. Features hold function, and auto power off with low…

  • 16mm Snap Cap for Tubes

    Globe Scientific

    …glass tubes Fits most 16mm glass evacuated blood collection tubes Thumb tab for easy removal Polyethylene (LDPE) 1000 caps per sealed bag Assorted colors available These colorful snap on closures are an effective way to recap 16mm blood drawing tubes and glass test tubes. They are…

  • 12/13mm Snap Cap for Tubes

    Globe Scientific

    tubes Fits most 12mm plastic culture tubes Thumb tab for easy removal Polyethylene (LDPE) 1000 caps per sealed bag Assorted colors available These colorful snap on closures are an effective way to recap 13mm blood drawing tubes, glass test tubes and most 12mm plastic culture tubes.

  • Polystyrene Tubes with Screw Cap

    Greiner Bio-One

  • KIMAX Test Tubes With Marking Spot

    DWK Life Sciences (Kimble)

    With marking spot and deep form, black phenolic plastic caps with cemented rubber liners Caps are autoclavable; see 9210R18 series for conditions (unattached) Listings indicate tube length x o.d. in mm

  • PYREX® Screw Cap Culture Tubes with PTFE Lined Phenolic Caps

    Corning

    These PYREX® culture tubes are supplied with phenolic caps to facilitate handling and sealing after autoclaving. Caps are fabricated from a special formula resistant to the effects of temperature and steam in autoclaving and are provided with a Polytetrafluorethylene (PTFE) interface firmly…

  • PH200 Portable Meter Kit for Test Tubes & Small Samples

    labForce (a Thomas Scientific Brand)

    The labForce TS-SS200 Portable pH Meter is designed for professional pH measurement in test tubes and small liquid samples (>0.2mL). The 3-in-1 POM pH/Temperature Electrode adopts a Long-Life reference system, and a unique cylindrical semi-micro sensor, making precise small sample pH measurement…

  • Test Tubes, Screw Caps Cylindrical

    Dynalon

    15mL test tubes with blue quick closure screw caps (PE), leakproof, and suitable for centrifugation. The design of the cap avoids any contamination due to drops of liquid on the inner surface. Case of 100.

  • PurePlus® 8-Well PCR Tube Strips with Attached Bubble Cap Strips

    Labcon

    …processing compliant with ISO 11137. So unlike "pre-sterile" products from other suppliers you can use PurePlus® PCR disposables for diagnostic and regulated procedures. 0.2 mL PCR strip tubes with 8 wells for most thermocyclers With attached bubble snap caps Fits most 8…

  • Screw Cap Centrifuge Tubes

    Stockwell Scientific

    …expectations. Our 50mL tubes are rated at 10,000 RCF. Printed tubes feature blue silk-screened graduations for better visibility with a large writing patch that allows for easy sample identification. Our tubes are made from a selection of materials that have been time tested for optimum…

  • Plastic Caps With Teflon Liners

    Corning

    As supplied with 9212K21 series test tubes, with Teflon over-liner Cap size shown is GPI thread-finish

  • Plastic Viewing Tubes with Caps

    Hach

    Plastic color viewing tubes for use in a variety of Hach test kits.

  • 8-Strip Tubes with Hinged Caps

    Strips of hinged attached caps enable quicker liquid handling and more efficient scale up. Optically clear caps for real-time PCR (qPCR). Uniform thin walls. Certified free of detectable RNase DNase, DNA, PCR inhibitors, and tested pyrogen-free.

  • 8-Strip Tubes with Individually-Attached Caps

    Angularly attached caps prevent cap lids and hinges from interfering with each other, allowing for easier operation in an SBS format rack. Robust interwell linkages make the tubes rigid, decreasing the chance of spillage. Unique two-material manufacturing creates the perfect environment for…

  • Plug caps for ClavePak 96 Racked Tubes 1.1ml, 120 strips of 8, Qty: 960

    Denville

    …capacity Polypropylene - autoclavable and freezable to -80°C Ideal for preps and dilutions that are ultimately carried out in 96 well plates. Also used for large volume screening, HIV testing, cell harvesting and storage. Compatible with multi-channel pipettes and workstations.

  • APHA Nessler Color Comparisons Tubes with Cap Stoppers

    DWK Life Sciences (Kimble)

    These Nessler tubes are ideal for color comparison and feature cap style stoppers that do not need to be removed to take readings. Shadowless bottom of each tube transmits undistorted light Standard Taper cap style stopper Replacement cap is 15182 (3058L93 & 3058L98) 3058K65 is…

  • Plug caps, 120 strips of 8, sterile, compatible with ClavePak 96 Racked 1.1ml…

    Denville

    …0.65ml capacity Polypropylene - autoclavable and freezable to -80°C Ideal for preps and dilutions that are ultimately carried out in 96 well plates. Also used for large volume screening, HIV testing, cell harvesting and storage. Compatible with multi-channel pipettes and workstations.

  • 1.5mL Snap Cap Microcentrifuge Tubes

    Stockwell Scientific

    … Brittleness Temp.: 0°C Max. Temp.: 135°C Material: PP Max. Volume: 1.75mL Note: Polypropylene is not recommended for use with Phenol Chloroform. Low temperature storage, multiple spin cycles or organic solvents can affect maximum force. Run a test before using.

  • 400uL Snap Cap Microcentrifuge Tubes

    Stockwell Scientific

    … Brittleness Temp.: -100°C Max. Temp.: 80°C Material: LDPE Max. Volume: 0.4mL Note: Polypropylene is not recommended for use with Phenol Chloroform. Low temperature storage, multiple spin cycles or organic solvents can affect maximum force. Run a test before using.

  • 13mm Snap Caps with 2 Thumb Tabs

    Globe Scientific

    Fits 13mm glass evacuated blood drawing tubes Fits most 12mm plastic test tubes Dual tabs for easy removal Polyethylene (PE)

  • Ultra-High-Speed 15mL & 50mL Polypropylene Centrifuge Tubes

    labForce (a Thomas Scientific Brand)

    …Features and Benefits: Ultra-High Performance - High spin rates with maximum RCF ratings of up to 20,000 x g for 50mL centrifuge tubes and 17,000 x g for 15mL centrifuge tubes Certified for Science SM - Tubes are manufactured in a class 100,000 clean room, gamma irradiated to SAL…

  • Polystyrene General Purpose Test Tubes

    Evergreen Scientific

    …ribbed 12 x 75 mm tubes are suitable for use in antibody coating and/or protein adsorptions. Six slanted ribs increase useful surface area. Tubes are bulk-packed and non-sterile and come without caps (except for tubes with screwcaps). Polyethylene caps are available. Keyword:…

  • Plug caps, 80 strips of 12 for the ClavePak 96 Racked Tubes Qty: 960

    Denville

    …capacity Polypropylene - autoclavable and freezable to -80°C Ideal for preps and dilutions that are ultimately carried out in 96 well plates. Also used for large volume screening, HIV testing, cell harvesting and storage. Compatible with multi-channel pipettes and workstations.

  • PurePlus® 8-Well PCR Tube Strips with Attached Clear Flat Cap Strips

    Labcon

    …compliant with ISO 11137. So unlike "pre-sterile" products from other suppliers you can use PurePlus® PCR disposables for diagnostic and regulated procedures. 0.2 mL PCR strip tubes with 8 wells for real-time PCR thermocyclers With attached optically clear flat snap caps

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.