Test Tube Stand

… A drip pan protects the tips of the pipettes and collects liquid as it drips off. The pipette stand is suitable for drying and for space-saving storage of pipettes or thermometers, test tubes and similar items. A very sturdy pedestal ensures absolute safety against overturning. No clamping…

Fully autoclavable Manufactured from durable reinforced polypropylene (PP) Three tiered design holds tubes securely Sturdy handles facilitate easy transport 4 Color options for organization of samples or benchtop

This set contains twleve 24 mL glass test tubes with rubber stoppers, and a brightly colored two tiered test tube stand.

This set contains twelve 15ml screw top graduated plastic tubes and a brightly colored two tiered test tube stand.

This circular 12 place Polypropylene test tube stand has four 25mm diameter holes and eight 19mm diameter holes. The base has matching wells and 16 drying pins surrounded by a trough to catch drippings. Pre-assembled.

Dry Test Tubes, Beakers, Flasks, and Other Labware For drying test tubes, beakers, flasks, and other labware, this stand has rubber tipped feet for non-skid use on a tabletop, or wire loops on the back for wall mounting. Three rows of epoxy-coated hairpin-loop supports (14 in all) hold…

… Test Tube Holder 10-13mm accommodates test tubes with 10-13 mm OD. Two may be stacked for increased capacity. Stacked holders can't accommodate an upper rack in the washer. Type 304 stainless steel. Requires Labconco 4575300 Conversion Kit & Lower Spindle Rack (not included). Test Tube…

This reagent set contains Lovibond's Powder Pack™ and Tube Test Reagents. Powder Pack Reagents are pre-measured, unit dose reagents that have been formulated for use in Lovibond's Aqua Comparator Test Kits, the SC450 Single Parameter Colorimeter Series, MC500 Multi-Parameter…

Transport/ Cultue Tube (T7950) 16 x 100mm PP self-standing with screw-cap, white printed graduations 14mL sterile 10 bags of 100 tubes, 1000/cs Transport/ Cultue Tube (T7955) 16 x1 00mm PS round bottom with screw-cap white printed graduations 12mL sterile …

…transport tube comes with a blue cap Volume: 5mL; cap and tube material: virgin polypropylene Unassembled; non-sterile; autoclavable Provides a ‘leak-proof’ and reliable seal for critical sample storage Features a large, frosted writing area; Pressure tested for 95kPa;…

…highly beneficial for automated dosing or sampling process. Pleasant test environment by the smooth acceleration and deceleration control. Smooth start and smooth stop function prevents chemical spills from flasks or test tubes. Easy sample monitoring and convenient sample loading. Clear…

The labForce TS-SS200 Portable pH Meter is designed for professional pH measurement in test tubes and small liquid samples (>0.2mL). The 3-in-1 POM pH/Temperature Electrode adopts a Long-Life reference system, and a unique cylindrical semi-micro sensor, making precise small sample pH measurement…

Color Comparison Tests Just Became Easier Colors stand out against the white surfaces of this polypropylene rack making color comparison tests easier to read. Useful for drying or storing test tubes Holds six, 25mm or eight, 18mm tubes; includes six drying pins Steam autoclavable…

… Test Tube Holder 10-13mm accommodates test tubes with 10-13 mm OD. Two may be stacked for increased capacity. Stacked holders can't accommodate an upper rack in the washer. Type 304 stainless steel. Requires Labconco 4575300 Conversion Kit & Lower Spindle Rack (not included). Test Tube…

…force is 12,000xg for the 15ml tubes and 15,000xg for the 50 ml tubes*. Caps have a flat top surface for easy marking and labeling.  Cat. No. C2605 features a ‘skirted’ bottom that allows the tube to stand upright without a separate test tube rack. Sterile, RNase, DNase,…

Transport tubes, sometimes called mailing tubes, are used in multiple sectors of the laboratory market, including medical, hospital, environmental, independent testing, food testing, and biological research labs. Used to store, transport or freeze samples, these tubes come in both 5mL (16 x…

… tubes manufactured from high-clarity polypropylene. Features dark imprinted graduations and a large white writing area for sample identification. Flat polyethylene cap also provides another opportunity for labeling. Available in sterile bulk and racked versions (50 mL self standing bulk…

…laboratory periphery is given as this new Eppendorf tube has the same diameter as 50 mL conical tubes. System components like adapters for centrifugation, Eppendorf SmartBlock™, Test Tube Holder for MixMate®, storage box and single tube stand are available. New cap design: flattened…

…reliability of the Screw-Cap tube lets you perform procedures that simply can’t be done with other tubes. Spin it, store it, transport it (even by air). Boil it, irradiate it, immerse it in the vapor phase of liquid nitrogen-it’ll stand up to the test! Inside the screw cap, the ethylene…

…ease of use. SureSeal S tubes are manufactured under clean room conditions, using only BioClear™ co-polymer, an advanced polypropylene that maximizes clarity. BioClear has been formulated to be crystal clear, without compromising centrifugal strength (tested up to 28,000xg) or the usable…

Transport tubes, sometimes called mailing tubes, are used in multiple sectors of the laboratory market, including medical, hospital, environmental, independent testing, food testing, and biological research labs. Used to store, transport or freeze samples, these tubes come in both 5mL (16 x 60mm)…

Polypropylene Transport Tube with a Separate Screw Cap. Conical Bottom, Self-Standing, Molded Graduations. Gamma Radiation Sterilized. 200 tubes/bag, 1000 tubes/case.  

…force is 12,000xg for the 10ml or 15ml tubes and 15,000xg for the 50 ml tubes*. Caps have a flat top surface for easy marking and labeling. Cat. No. C2605 features a ‘skirted’ bottom that allows the tube to stand upright without a separate test tube rack. *Refers to liquids with a…

…research grade components Includes: (1) base, (1) rod, (1) beaker tong, (1) crucible tong, (1) tripod stand, (1) wire gauge, (1) boss head, (1) clamp, (1) retort ring with boss head, (1) burette clamp double, (1) test tube holder, (1) test tube stand (z-shape), (1) test tube brush- spatula

…includes:  instructions, sample mixture, chromatography columns, dry matrix, elution buffer, transfer pipets, microtest tubes. You need:  50 or 100 ml beakers, 25 ml beaker or test tube, ring stands with clamps, distilled water. Storage:  Room Temperature  

…compliant for petroleum testing Swing out rotor for pear shaped or conical ASTM tubes LCD display, control speed in rpm or rcf 230V only The OLEUM Oil-Testing Centrifuge is our stand alone oil testing centrifuge for pear shaped or conical ASTM oil testing tubes. A 4-place swing…

…Matrix Tubes are ideal for grinding, lysis and homogenization of your most resistant samples! Constructed from 308 SS, these tubes and grinding matrix are tough enough to stand up to the most demanding mechanical punishment that can cause traditional thermoplastic tubes to crack. Our tubes are…

…Matrix Tubes are ideal for grinding, lysis and homogenization of your most resistant samples! Constructed from 308 SS, these tubes and grinding matrix are tough enough to stand up to the most demanding mechanical punishment that can cause traditional thermoplastic tubes to crack. Our tubes are…

…660™ Protein Assay has sufficient reagents for 500 stand ard test tube assays or 2,500 stand ard microwell assays. The assay is supplied with a traditional bovine serum albumin (BSA) protein stand ard or a non animal protein stand ard. RED 660™ Protein Assay is compatible with…

…pneumatic tubes and centrifuges. For an uncomplicated transfer of the specimen from the urinalysis cup to the tube,  we provide a 3mL disposable pipette.  Engineered with your needs in mind, the MedSchenker® Urine Collection System is the best choice for your testing needs. 

…Beakers, 50mL, 150mL, 250mL Buret, 50mL Stir Bar Graduated Cylinders, 10mL and 100mL Magnetic Stirrer pH Meter Test Tubes, 16 x 150 mm Test Tube rack pH Test Paper Support Stand and Buret Blamp Water, Distilled or Deionized Wash Bottle DOT Info: UN2796, Sulfuric acid, 8, II, Ltd Qty WARNING:…

…color coding of samples. A support at each corner allows grids to stand on the lab bench, ice bath, etc. The grids are also alphanumerically labeled. Autoclavable, polypropylene tubes are available in individual or 8-strip designs. Tubes have gross volumes of 1.4 mL and a volume of 1.1 mL when a cap…