Test Tube Shaker

Compare Tool

Select up to 3 products

Test Tube Shaker
1 - 32 of 84
Sort
View
Show
  • Therma-Shaker™ Mini Shaking Incubators

    labForce (a Thomas Scientific Brand)

    …and staining trays. The convenient MAGic Clamp™ (available from Benchmark Scientific) platform is also available for use with Erlenmeyer flasks and test tube racks. The unique, magnetic attachment method is the easiest way to instantly change between flask clamps of different sizes.

  • …Lab Dancer is an economic and innovative shaker that handles small containers up to 30 mm in diameter. It is compact (100 x 70 mm) and provides excellent mixing action. Fixed speed is 2800 rpm and shaking stroke is 4.5 mm. The upper casing and test tube surface are made from inert plastic. Unit…

  • …platform attachment. Test tube racks also feature stainless steel construction and are supplied with hardware for attachment to platforms. The 10-14 mm rack (1231B12) holds 48 tubes, the 16-20 mm rack (1231B13) holds 33 tubes and the 21-25 mm rack (1231B14) holds 21 tubes. Small platform (1231A95)…

  • …state-of-the-art Intelli-Mixer is equipped to perform each and every type of test tube mixing with brilliant efficiency. This versatile unit comes standard with a mixed test tube rack, supporting 0.5 to 50 ml test tubes. Additionally, 3 optional rack-lengths are available, along with an…

  • …to automatic mode - the units will start once a vessel is pressed to the plate, and will stop automatically once this pressure is released Fast and dependable mixing results due to high vibration frequency rates up to 2,500 rpm Plate for 20-mm diameter test tubes is included as a standard

  • …x 22 mm deep, for single test tubes and other small vessels. Heads are interchangeable and snap in place without use of tools. For additional mixing heads, see 8294D35 series. Housing is coated cast iron, 156 x 121 x 165 mm high, with rubber feet. 8294D17 shaker has 3-wire cord and plug for…

  • …state-of-the-art Intelli-Mixer is equipped to perform each and every type of test tube mixing with brilliant efficiency. This versatile unit comes standard with a mixed test tube rack, supporting 0.5 to 50 ml test tubes. Additionally 8 optional racks are available, to satisfy your specific…

  • Thermomixers

    Eppendorf

    …enzymatic tests, cell technology, immunological tests and general lab applications. Incubation and mixing may be performed independently of one another. Independent heating and mixing functions Temperature range: 4°C above room temperature up to 99°C Capacity: 24 x 1.5 mL tubes

  • Cel-Gro Tissue Culture Rotator

    Thermo Scientific

    Mix test tube contents for optimum culture results with the gentle rotating motion of the Thermo Scientific™ Cel-Gro Tissue Culture Rotator, featuring a no-maintenance brushless motor. The single drum has an adjustable rotating angle and speed. Features: Rotator operates in…

  • Rocking Shakers

    Lab Companion

    …keypad Compact and lightweight design allowing for use inside incubators, environmental chambers, refrigerators, cold rooms, etc Three types of removable rubber mat for easy transport of well-plates, test tubes, etc (included Dimpled mat, and optional Rubber mat, Universal harness)

  • Test Tube Racks - Full Size, Pivoting Adjustable angle, custom tilt Stainless steel holder includes removable rack Inside Rack Holder: 5.1L x 10.8W x 3.9H”(12.9 x 27.4 x 9.9cm) Outer Rack Housing: 5L x 10.9W x 5H” (12.7 x 27.6 x 12.7cm) Thomas No. 1217R41 …

  • …Various tube sizes can be mixed by changing cartridge size, eliminating need for extra racks. Cartridges available for test tubes and centrifuge tubes can be used with capped or uncapped tubes. Unit easily adjusts for different height tubes. During operation, contents of tubes remain visible…

  • Takes one test tube rack containing capped or stoppered tubes from 75 to 200 mm long Use existing test tube racks up to 12" x 5" (305 x 127 mm) Rack is secured in holder by lid which fits over threaded end posts and is adjustable in height above support platform. Knurled nuts are used…

  • …for safely securing test tubes, flasks and plates to your shaker. The Universal Platform provides the flexibility for mixing different size test tubes and glassware on a single platform. Numerous mounting holes allow you to add and interchange clamps and test tube racks, at your discretion.…

  • Maxi Mix III Rotary Shakers

    Thermo Scientific

    …time. The Universal Holder (8289M95) accepts flasks, beakers, bottles and test tube racks between the two adjustable rubber rollers. Accessories 8289M80 Foam Top (included with base units) for vortexing test tubes or small flasks up to 110 mL 8289M85 Utility Tray has 200 x 410 mm…

  • … Talboys Advanced High Speed Microplate Shakers handle shaking for difficult applications. These units operate at up to 2500rpm while holding deep-well blocks and small diameter test tubes no taller than 5" (12.7cm). Advanced High Speed Microplate Shaker has programmable digital speed control from…

  • Accessories: Clamps & Test Tube Racks

    New Brunswick Scientific

    Sticky Pads are an alternative to flask clamps for securing vessels to a shaker platform Ideal for containers such as bottles and dishes that cannot be held with conventional flask clamps With flasks, these products can be used at speeds of up to 200 to 300 RPM depending on orbit diameter,…

  • …Hz. Also includes friction-drive test tube head (8293Q27). For blood agitations, isotopic competitive protein binding assays and similar procedures Attaches to 8293Q12 Power Drive Unit Clutch allows stopping the head to insert and remove tubes without turning off motor Consists…

  • Shaker Accessories

    Thermo Scientific

    …with Clamps, for 8290F20, F25, F27 and 8291J05, J93 and J97 Size 457 x 457 mm, with clamps for holding glassware 8291K88 through K97 Platforms for use with Erlenmeyer flasks. 8291L01 through L07 Platforms for use with test tubes. Quantity of vessels x vessel size given in listings

  • …flasks, measuring flasks, and Erlenmeyer flasks. Fixing clips must be ordered separately. The AS 130.4 test tube support is for small tubes, test tubes, cuvettes and centrifugal tubes that will undergo intensive shaking. The R 1300 dissolver stirrer provides radial flow for drawing the material…

  • Open-Air Shakers

    Lab Companion

    …highly beneficial for automated dosing or sampling process Pleasant test environment by the smooth acceleration and deceleration control. Smooth start and smooth stop function prevent chemical spills from flasks or test tubes. Low-profile design minimizes vibration or sliding caused by the…

  • Waving Shakers

    Lab Companion

    …keypad Compact and lightweight design allowing for use inside incubators, environmental chambers, refrigerators, cold rooms, etc Three types of removable rubber mat for easy transport of well-plates, test tubes, etc (included Dimpled mat, and optional Rubber mat, Universal harness)

  • Vortamix™ Mini Vortexer

    Argos Technologies

    tubes quickly and easily. The vortexing motion is activated by placing a tube on the gasket cap and then pressing down lightly. The innovative design of the gasket cap allows centrifuge and test tubes up to 30 mm in diameter to be mixed with very little effort – including 50mL conical tubes!

  • shaker Displays for speed and time 3mm or 15mm orbit 2 year warranty Talboys Advanced 1000-3 and 1000-15 Orbital Shakers are ideal for a wide variety of shaking applications. Tray includes a non-skid rubber mat. Remove mat to mount a variety of optional flask clamps or test tube

  • Test Tube Racks - Half Size, Stationary PVC coated steel Includes hardware for easy attachment to platforms 7L x 5W x 4H" (12.7 x 17.8 x 10.2cm) / Micro-Tube Rack:1.7H" (4.3cm) Test Tube Racks - Full Size, Stationary PVC coated steel Includes hardware for easy attachment to…

  • Accessories: Clamps & Test Tube Racks

    New Brunswick Scientific

    Eppendorf™ Sticky Tape is an alternative to flask clamps for securing vessels to a shaker platform. Ideal for bottles and dishes or containers that cannot be held with conventional flask clamps Tape can be used at speeds of up to 200 to 300 rpm depending on flask size, orbit…

  • …for test tube inserts. Thomas No. 1203B97 Attachment for Eppendorf tubes or test tubes. Bore holes (number) 70 Hole ø 10 mm Thomas No. 1203B98 Attachment for test tubes. Bore holes (number) 41 Hole ø 12 mm Thomas No. 1203B99 Attachment for test tubes.

  • Benchtop open air platform shaker for use with interchangeable platforms, clamps, and test tubes For shaking in ambient conditions: on the bench, in an incubator or in a warm or cold room, the Innova Platform Shakers are the instrument of choice. Dependable operation is due in large part to…

  • tubes: 36 x 1.5 / 2.0ml; 10 x 15ml/12 x 5ml; and 6 x 50ml The unit accepts a broad assortment of tube sizes as well as microplates. Safe for cold room or incubator use, this mixer is ideal for a wide range of applications in areas such as biochemistry, molecular biology, clinical testing and…

  • Allows for mounting of flask clamps, test tube racks, and bottle clamps Platform slides over top of included tray and is tightened with adjustment screws Optional accessories screw directly into mounting point openings> Two-tier braces allow stacking of platforms with a 10" clearance…

  • Innova 26 Incubator Shakers

    New Brunswick Scientific

    …of platforms, clamps, test tube holders and other accessories allow configuration to meet your exact needs. Based on the design concepts of the Innova® shakers, the I26 and I26R offer excellent performance at a value price. I24 benchtop incubator shakers and I24R with added refrigeration…

  • Shaker Accessories

    IKA Works

    …420 x 270 x 32 mm Set-up plate: 220 x 340 mm Weight: 370 g Thomas No. 8289S33 For intensive shaking, e.g. small tubes, test tubes, cuvettes, centrifuge tubes. Dimensions: (W x D x H): 220 x 230 x 95 mm Capacity: 64 Vessel diameter: 10 - 16 mm Min. height of the vessel: 80 mm …

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.