Test Tube Racks 20 Mm

Thermo Scientific™ Cimarec™ i Test Tube Racks for use with Telesystem Series Stirrers. Stainless-steel test tube rack Ensure test tubes are precisely centered over stirring point Rack holds 20 mm tubes

…drip trays, drain shelves or funnel racks. Measures 762 mm x 762 mm (30" x 30"). Other sizes are available on special order. 9275L80 same as 9275L15, but with full-width drip trough along bottom edge which has central, stainless steel tubing connector, 3/8" o.d., for connection…

Ready-to-use No assembly required Provides an unrestricted view of tubes Available in 2 sizes: 13 and 16 mm and four colors: white, blue, green and red. Do not autoclave.

Full-size Unwire test tube racks securely hold a full load of test tubes or centrifuge. Up to 72 of the smaller diameter tubes can be held at once. Molded in six bright, permanent colors Resmer™ manufacturing technology makes these racks keep their bright colors longer. Useful in a wide…

Full-size Unwire test tube racks securely hold a full load of test tubes or centrifuge. Up to 72 of the smaller diameter tubes can be held at once. Molded in six bright, permanent colors Resmer™ manufacturing technology makes these racks keep their bright colors longer. Useful in a wide…

…Rack. The Bulk Tube Insert's quick-loading design holds up to 600 each 13 mm tubes or 244 each 20 mm tubes. Divider securely holds tubes during wash cycle. For use in Labconco Upper or Lower, Standard or Spindle Rack. Culture Tube Insert 10-12 mm with Top is designed to hold 10-12 mm OD…

…Rack. The Bulk Tube Insert's quick-loading design holds up to 600 each 13 mm tubes or 244 each 20 mm tubes. Divider securely holds tubes during wash cycle. For use in Labconco Upper or Lower, Standard or Spindle Rack. Culture Tube Insert 10-12 mm with Top is designed to hold 10-12 mm OD…

…epoxy coating to chip or scratch Assorted colors available Racks are molded in one-piece in a 3 x 3 array. The three-tier design has letters and numbers to identify tube locations.The racks’ thermal properties allow both autoclaving and freezing. Racks can hold tubes up to 30 mm diameter.

…Rack. The Bulk Tube Insert's quick-loading design holds up to 600 each 13 mm tubes or 244 each 20 mm tubes. Divider securely holds tubes during wash cycle. For use in Labconco Upper or Lower, Standard or Spindle Rack. Culture Tube Insert 10-12 mm with Top is designed to hold 10-12 mm OD…

Reusable PYREX rimless culture tubes offer greater convenience in plugging and rack storage. Ends are fire-polished. The 22 and 25mm o.d. tubes do not have marking spots.

These reusable PYREX® rimless culture tubes offer greater convenience in plugging and rack storage. Walls and bottoms are of uniform thickness. Ends are fire-polished.

…31 mm Stainless-steel test-tube rack with 20 openings Ø 13 mm Test tube rack for max. 243 tubes 160 x Ø 16/17 mm Test tube rack for max. 63 tubes 160 x Ø 25-30 mm Mike Bottle Rack 12 openings 56mm each Insert rack for Falcon-Tubes 15 ml max 20 tubes Insert rack for…

…than full-size racks. Test Tube Rack Clamps: Clamps securely hold test tubes of 13, 16, 20, 25 and 30 mm. Racks contain a polyethylene foam insert to hold tubes tightly and prevent them from spinning. Inserts can be removed when not needed. Microcentrifuge Tube Rack Clamps: Securely…

…tube racks (a complete listing can be found in the ordering information section below). Additionally, BenchMixer XL can easily be adapted to almost any type of vessel commonly found in the laboratory (contact us for details). Using BenchMixer XL is easy; after loading the sample rack and…

…Rack. The Bulk Tube Insert's quick-loading design holds up to 600 each 13 mm tubes or 244 each 20 mm tubes. Divider securely holds tubes during wash cycle. For use in Labconco Upper or Lower, Standard or Spindle Rack. Culture Tube Insert 10-12 mm with Top is designed to hold 10-12 mm OD…

…Rack. The Bulk Tube Insert's quick-loading design holds up to 600 each 13 mm tubes or 244 each 20 mm tubes. Divider securely holds tubes during wash cycle. For use in Labconco Upper or Lower, Standard or Spindle Rack. Culture Tube Insert 10-12 mm with Top is designed to hold 10-12 mm OD…

…Rack. The Bulk Tube Insert's quick-loading design holds up to 600 each 13 mm tubes or 244 each 20 mm tubes. Divider securely holds tubes during wash cycle. For use in Labconco Upper or Lower, Standard or Spindle Rack. Culture Tube Insert 10-12 mm with Top is designed to hold 10-12 mm OD…

…Rack. The Bulk Tube Insert's quick-loading design holds up to 600 each 13 mm tubes or 244 each 20 mm tubes. Divider securely holds tubes during wash cycle. For use in Labconco Upper or Lower, Standard or Spindle Rack. Culture Tube Insert 10-12 mm with Top is designed to hold 10-12 mm OD…

…Rack. The Bulk Tube Insert's quick-loading design holds up to 600 each 13 mm tubes or 244 each 20 mm tubes. Divider securely holds tubes during wash cycle. For use in Labconco Upper or Lower, Standard or Spindle Rack. Culture Tube Insert 10-12 mm with Top is designed to hold 10-12 mm OD…

…polymer A newly designed tube support that can be used all around the lab. The MultiRackTM is available in three models to accommodate a full range of laboratory test tubes and centrifuge tubes up to 30 mm in diameter. Although it is one of the most attractive racks available today, it offers…

…mm tubes, 14-19 mm tubes, and 20-25 mm tubes as well as a blank insert. The microwell plate kit with retainer (8294B60) includes a 48-hole microtube foam rack for 0.5 and 1.5 mL tubes, a microwell plate foam rack and insert retainer. Thomas No. 8294B70 cup head is a rubber adapter for test tubes,…

…platform attachment. Test tube racks also feature stainless steel construction and are supplied with hardware for attachment to platforms. The 10-14 mm rack (1231B12) holds 48 tubes, the 16-20 mm rack (1231B13) holds 33 tubes and the 21-25 mm rack (1231B14) holds 21 tubes. Small platform (1231A95)…

…165 x 165 x 50 mm (6.50 x 6.50 x 1.97 in) mini universal spring platform suspends test tubes between rows of aligned springs; Screws into universal platforms IS-A20 - Ø14mm Adjustable Angle Tube Rack: Holds 40 tubes with diameter Ø14mm (Ø0.55in); Tube holder angle…

…accepts flasks, beakers, bottles and test tube racks between the two adjustable rubber rollers. Accessories 8289M80 Foam Top (included with base units) for vortexing test tubes or small flasks up to 110 mL 8289M85 Utility Tray has 200 x 410 mm (7 3/4" x 15 3/4") non-skid…

…control. Valve takes 1/4″ vacuum tubing. PP collection vessel rack accommodates autosampler vials; small scintillation vials (22.75 mm O.D. recommended); 10 and 16 mm test tubes; and 1, 2, 5, and 10 mL volumetric flasks. An optional plate for 20 mL scintillation vials is available for…

…control. Valve takes 1/4″ vacuum tubing. PP collection vessel rack accommodates autosampler vials; small scintillation vials (22.75 mm O.D. recommended); 10 and 16 mm test tubes; and 1, 2, 5, and 10 mL volumetric flasks. An optional plate for 20 mL scintillation vials is available for…

Extended length (91 mm / 3.58 inch) to easily reach the bottom of 12 x 75 mm tubes without risking contamination to the pipettor nose cone Compatible with 20, 100, and 200 μL pipettors (and 300 μL non-filtered) Filter placement is optimized to accommodate 20, 100, and 200 μL…

…workloads DKL 8 (8-position with 250 ml tubes, Ø 42 mm) DKL 12 (12-position with 250/400 ml tubes, Ø 42 mm) DKL 20 (20-position with 250/400 ml tubes, Ø 42 mm) DKL 42/26 (42-position with 100 ml tubes, Ø 26 mm) Incorporates TEMS™ technology*…

…flasks to the bottom of a standard basket.  They are available in several sizes. Test tube rack The stainless steel test tube rack hold 16 test tubes with a diameter of 16.5 mm. The rack fits Elma size 15, 30, 40, 60, 70, and 80 tanks. Acid resistant tubs Acid…

…DuraPorter® transport box that has a specially designed insert to seat the centrifuge, all its accessories and incorporates a 16-place micro tube rack as well. The DuraPorter is transparent, so any samples contained can be viewed and their integrity checked. Sprout® Mini Centrifuge …