Test Tube Rack

…conical tubes fit 20mm racks; 50mL conical fit 30mm racks. No assembly is required; rack is ready to use. Securely hold a full load of test tubes or centrifuge tubes for 13, 16, 20, 25 and 30mm diameter sizes with Thermo Scientific™ Nalgene™ Unwire™ Test Tube Racks.…

…limited. Choice of three colors: orange for biohazard warning, green and blue for general lab use. Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy Unaffected by organic solvents, salts, weak acids and weak alkalis Will withstand a temperature range of…

…tubes Specially designed test tube rack features rubber grips that hold test tubes in place when decanting liquid. For up to 17mm tubes, 50-place (5 x 10 configuration), blue, Autoclavable. Dimensions: 254 x 140 x 51mm Grip rack w/ tube ejector Specially designed test tube…

…most acids, solvents, and heat. Extra-tough storage for smaller spaces. These durable racks are molded in a single, continuous piece—no assembly required and no detachable pieces. Racks are made of Delrin® fiberglass-reinforced polyoxymethylene (POM), an engineered polymer developed…

…capacity Polypropylene - autoclavable and freezable to -80°C Ideal for preps and dilutions that are ultimately carried out in 96 well plates. Also used for large volume screening, HIV testing, cell harvesting and storage. Compatible with multi-channel pipettes and workstations.

Racks are made of Delrin® fiberglass-reinforced polyoxymethylene (POM), an engineered polymer developed by DuPont to have exceptional chemical and heat resistance. These durable racks are molded in a single, continuous piece—no assembly required and no detachable pieces. Molded index…

Hold More Tubes, Waste Less Space This versatile polypropylene rack has pins for supporting or draining test tubes. Stores test tubes upright, full or empty Holds inverted test tubes over pins for draining The rack with 102 pins, 5 x 16 rows (9259G50), is excellent for drying and…

Test Tube Racks. High-density polyethylene. 2 tier racks hold 10 tubes and 3 tier racks hold 12 or 24 tubes. Lightweight, unbreakable test tube rack. Molded of high density polyethylene. Will withstand  temperatures up to 110° C. Three-tier racks have legs to raise them from table.…

Ready-to-use No assembly required Provides an unrestricted view of tubes Available in 2 sizes: 13 and 16 mm and four colors: white, blue, green and red. Do not autoclave.

Test Tube Supports for 10, 13, 16 mm tubes. Acrylic units have clear shelves with white sides and bases.

…of a special blend of polypropylene, these autoclavable racks will sink in a water bath Interlocking feet allow racks to be stacked while not in use Racks feature end plates for labeling. Rows are numbered and lettered for tube identification. Outside dimensions: 9.7” x 4.1”…

Test Tubes ‘Hang in There’ in Any Position, Even Inverted! Retainer fingers hold tubes firmly in the rack plates with no fear of dislodging, making them perfect for both decanting and water bath work.  • Fingers allow simultaneous decanting to save valuable…

…to break, no sharp edges. Endplates accept large labels. Rack withstands most lab chemicals and temperatures up to 121°C for a variety of lab procedures. 15mL conical tubes fit 20mm racks; 50mL conical fit 30mm racks. No assembly is required. Organize and store samples with…

Non-scratching Empty racks can be stacked Tube-centering depressions in bottom shelf are perforated. The hole rows have molded-in numbers and letters. Not autoclavable. All racks are 115 mm wide x 95 mm high.

…capacity Polypropylene - autoclavable and freezable to -80°C Ideal for preps and dilutions that are ultimately carried out in 96 well plates. Also used for large volume screening, HIV testing, cell harvesting and storage. Compatible with multi-channel pipettes and workstations.

Autoclavable Rows are numbered and lettered Base plate has rounded wells with drain holes. Molded cutouts in end panels form handles. 9259L10 and L20 are 213 x 110 x 111 mm high; 9259L30 through L50 are 213 x 110 x 127 mm high.

Stainless steel test tube racks up to 150°C Suitable for: 2 x A 12, 6 x A 24, 1 x RA 12, 6 x RA 24, 1 x AL 5, 3 x AL 12, 6 x AL 18, 6 x AL 25, 2 x ET 12, E 10, 4 x ET 20, E 20

…tubes feature a small, easy-to-open/close cap with the assurance of an audible "click" to know that your sample is secure. Boilproof Fits all standard 2.0mL centrifuge rotors, racks, and storage boxes Graduated every 100µL for easy volume identification Small cap allows tubes…

…tubes feature a small, easy-to-open/close cap with the assurance of an audible "click" to know that your sample is secure. Boilproof Fits standard centrifuge rotors, racks, and storage boxes Graduated every 100µL for easy volume identification Small cap allows tubes to be…

…realtime PCR assays Rigid design is easy to work with minimizing the need to work with a PCR rack Conveniently stacked in bags of 12 strips per bag (10 bags per unit) minimizes the risk of contamination Certified free of detectable RNase DNase, DNA, PCR inhibitors, and tested pyrogen-free.

…0.65ml capacity Polypropylene - autoclavable and freezable to -80°C Ideal for preps and dilutions that are ultimately carried out in 96 well plates. Also used for large volume screening, HIV testing, cell harvesting and storage. Compatible with multi-channel pipettes and workstations.