Test Tube Rack 25mm

Test Tube Racks - Full Size, Pivoting Adjustable angle, custom tilt Stainless steel holder includes removable rack Inside Rack Holder: 5.1L x 10.8W x 3.9H”(12.9 x 27.4 x 9.9cm) Outer Rack Housing: 5L x 10.9W x 5H” (12.7 x 27.6 x 12.7cm) Thomas No. 1217R41 …

Dimensions: 295 x 125 x 85mm Racks are shipped flat for easy storage Easy to assemble: simply fold and snap together securely Racks are Autoclavable at 121°C for 20 minutes Can be used dry, wet or in water baths and will not float Special design allows samples…

…are autoclavable. Options include: #TTRK-13: 90 Hole Rack for up to 13mm Tubes #TTRK-17: 44 Hole Rack for up to 17mm Tubes #TTRK-20: 21 Hole Rack for up to 20mm Tubes #TTRK-25: 21 Hole Rack for up to 25mm Tubes PRODUCT WARNINGS Our products are not toys . Use…

Test tube racks are excellent space savers and can act as an extra pair of hands in the lab. There are 6 holes to hold tubes, as well as 6 pins for letting the tubes dry. PRODUCT WARNINGS WARNING: This product can expose you to chemicals including styrene, which are known to the State…

A very sturdy one piece molded polypropylene rack. All four sides can be used interchangeably for 12mm through 25mm diameter tubes. 88 spaces on its four sides

Color Comparison Tests Just Became Easier Colors stand out against the white surfaces of this polypropylene rack making color comparison tests easier to read. Useful for drying or storing test tubes Holds six, 25mm or eight, 18mm tubes; includes six drying pins Steam autoclavable…

Six 25mm holes, six drying pins, with a 1/2" thick base. Solid hardwood construction. Polished to minimize damage from spills.

Two-tier rack with thirteen 25mm holes, and six drying pins Solid hardwood construction Polished to minimize damage from spills

…of tubes. Racks are packaged unassembled and easily snap into place.  Available in mutiple configurations. 77706 - 13mm x 31 Tubes 77707 - 16mm x 31 Tubes 77708 - 20mm x 20 Tubes 77709 - 25mm x 12 Tubes 77710 - 25mm x 18 Tubes 77711 - 32mm x 12 Tubes 77712 - 25mm x 36…

This circular 12 place Polypropylene test tube stand has four 25mm diameter holes and eight 19mm diameter holes. The base has matching wells and 16 drying pins surrounded by a trough to catch drippings. Pre-assembled.

… Test Tube Holder 10-13mm accommodates test tubes with 10-13 mm OD. Two may be stacked for increased capacity. Stacked holders can't accommodate an upper rack in the washer. Type 304 stainless steel. Requires Labconco 4575300 Conversion Kit & Lower Spindle Rack (not included). Test Tube…

… Test Tube Holder 10-13mm accommodates test tubes with 10-13 mm OD. Two may be stacked for increased capacity. Stacked holders can't accommodate an upper rack in the washer. Type 304 stainless steel. Requires Labconco 4575300 Conversion Kit & Lower Spindle Rack (not included). Test Tube…

… Test Tube Holder 10-13mm accommodates test tubes with 10-13 mm OD. Two may be stacked for increased capacity. Stacked holders can't accommodate an upper rack in the washer. Type 304 stainless steel. Requires Labconco 4575300 Conversion Kit & Lower Spindle Rack (not included). Test Tube…

Reusable PYREX rimless culture tubes offer greater convenience in plugging and rack storage. Ends are fire-polished. The 22 and 25mm o.d. tubes do not have marking spots.

…your samples in place with racks for Thermo Scientific™ Precision™ water baths. Stainless-Steel Test Tube Rack Measures 10 x 8.5 x 5.5 in. (25.4 x 21.6 x 14cm) Openings are 1in. (2.5cm) square Holds 50 test tubes up to 25mm from 97 to 150mm high …

…high throughput testing in clinical, environmental, and chemistry labs. Accessories Talboys Foam Rack - Red 50mL:   (Dimensions: 5.5 x 9.5 x 2") 15 tube capacity. Talboys Foam Rack - White 25mm:   (Dimensions: 5.5 x 9.5 x 2") 28 tube capacity. Talboys…

… Test Tube Holder 10-13mm accommodates test tubes with 10-13 mm OD. Two may be stacked for increased capacity. Stacked holders can't accommodate an upper rack in the washer. Type 304 stainless steel. Requires Labconco 4575300 Conversion Kit & Lower Spindle Rack (not included). Test Tube…

… Test Tube Holder 10-13mm accommodates test tubes with 10-13 mm OD. Two may be stacked for increased capacity. Stacked holders can't accommodate an upper rack in the washer. Type 304 stainless steel. Requires Labconco 4575300 Conversion Kit & Lower Spindle Rack (not included). Test Tube…

… Test Tube Holder 10-13mm accommodates test tubes with 10-13 mm OD. Two may be stacked for increased capacity. Stacked holders can't accommodate an upper rack in the washer. Type 304 stainless steel. Requires Labconco 4575300 Conversion Kit & Lower Spindle Rack (not included). Test Tube…

… Test Tube Holder 10-13mm accommodates test tubes with 10-13 mm OD. Two may be stacked for increased capacity. Stacked holders can't accommodate an upper rack in the washer. Type 304 stainless steel. Requires Labconco 4575300 Conversion Kit & Lower Spindle Rack (not included). Test Tube…

… Test Tube Holder 10-13mm accommodates test tubes with 10-13 mm OD. Two may be stacked for increased capacity. Stacked holders can't accommodate an upper rack in the washer. Type 304 stainless steel. Requires Labconco 4575300 Conversion Kit & Lower Spindle Rack (not included). Test Tube…

…technician to view Standard sample compartment accommodates both 10mm square cuvettes and test tubes up to 25mm (1 inch) diameter Room light immune optical system lets you measure tall test tubes with the lid open Analyzer mode allows you to program standard methods Screen-print feature…