Temperature And Humidity Chamber

Compare Tool

Select up to 3 products

Temperature And Humidity Chamber
1 - 32 of 56
Sort
View
Show

Elpro

  • …specific humidity alarm Power failure alarm Sensor failure alarm Temperature setpoint range: 20°C to 60°C Temperature control: +/- 0.1°C Temperature stability: +/- 0.5°C from 20°C to 60°C (Range dependent per test protocol) Temperature uniformity:…

  • …Inner chamber made of stainless steel CFC-free refrigerants R-404A and R-23 Cooling with cascade compressor cooling unit BINDER environmental simulation chambers with humidity control BINDER environmental simulation chambers in the MKFT series are designed for rapid temperature

  • … One touch, on-screen datalogging Main chamber formed of one piece clear acrylic material This glove box accurately maintains temperature and humidity (Rh) inside a roomy, single station glove box.  Unit includes: vacuum capable transfer chamber, one-piece Hypalon gloves, large color touch…

  • …drops or rises in temperature, and at the same time an optimal view of the sensitive chamber load through wide-area heated inner glass door Humid environment without condensation The active humidity control ensures an ideal homogeneity of temperature and humidity as well as short…

  • …The wide temperature and humidity range make this humidity test chamber ideally suited for stress testing series. Temperature range: -10°C to 100°C Humidity range: 10 % RH to 98 % RH APT.line™ preheating chamber technology Humidity regulation with capacitive humidity

  • temperature and humidity control   Important characteristics · Temperature range: 0 °C to 70 °C · Humidity range: 20% to 80% RH · APT.line™ preheating chamber technology · Humidity regulation with capacitive humidity sensor…

  • …meets all critical requirements. Temperature range: 0°C to 70°C Humidity range: 10% to 80% RH APT.line™ preheating chamber technology Humidity regulation with capacitive humidity sensor and vapor humidification Inner chamber made of stainless steel Intuitive…

  • …characteristics Temperature range: 0°C to 70°C Humidity range: 20% to 80% RH APT.line™ preheating chamber technology Humidity regulation with capacitive humidity sensor and steam humidification LCD to display temperature and humidity along with additional…

  • …when chambers are fully loaded, you can rely on the temperature conditions being homogeneous, thereby ensuring identical test conditions. BINDER MKF series environmental simulation chambers are the number one choice for dynamic climate profiles. The required temperatures and humidity values…

  • temperature and humidity range make this constant climate chamber ideally suited for stresstesting series. BENEFITS Homogeneous climate conditions thanks to APT.line™ technology Automatic water and wastewater management Humidi?cation with fast response times Wide humidity

  • …conditions. Temperature range: 0°C to 70°C Temperature range with light: 10°C to 60°C Humidity range: 10 % to 80 % RH Positionable illumination cassettes with ICH-compliant UV/Vis light source APT.line™ preheating chamber technology Humidity regulation…

  • Temperature range: 0°C to 70°C Temperature range with light: 10°C to 60°C Humidity range: 10 % to 80 % RH Positionable illumination cassettes, each with 5 fluorescent tubes APT.line™ preheating chamber technology Adjustable fan speed Humidity regulation…

  • The remote ambient temperature / relative humidity sensor is mounted on a cord over 7’ long. Place the highly accurate sensor inside a desiccator, refrigerator, drying or other environmental chamber and view simultaneous displays of temperature and RH outside on the large LCD. Recalls min/max…

  • Temperature range with light: 10°C to 60°C Humidity range: 10% to 80% RH Positionable illumination cassettes with ICH-compliant UV/Vis light source Independent light-dose control of UV-A and visible light with spherical sensors APT.line™ preheating chamber technology…

  • …These models also allow you to stimulate gradual transitions from day to night, making them suitable for plant and insect growth. They are the ideal choice to meet compliance standards for ICH, FDA, TAPPI, ASTM, or national testing standards when controlled temperature and humidity are required.

  • …corrosion-free and condensation-free interior also ensures exceptionally stable temperature and moisture levels, even when fully loaded. The BINDER KBF-S ECO Climate Chamber has a humidity range of 20% to 80% RH and a temperature range -10° to 100°C.  It requires 100-120V (50-60Hz)…

  • …CA Series cyanoacrylate fuming chambers are the standard by which automated latent print development chambers are measured. The patented* recirculation filtration system with precise process controls for time, temperature and humidity put Mystaire® CA chambers in a class of their own. The…

  • … Wide temperature range of 0° to 60°C that enhances the flexibility of the unit Relative humidity control via steam generator from above ambient to 95% at 37°C (not available w/Cat. No. 3920) Sophisticated digital controls Programmable ramp and soak cycles for temperature and RH…

  • …including long guns. The microprocessor-controlled operating system allows for adjustment of chamber humidity to 80% +/- 5% relative humidity, pre-fuming humidity incubation, fuming temperature up to 424° F within +/- 1%, and fuming and exhaust times. System stores 20 programs, has 3…

  • Monitor RH and Temperature from up to 100’ away Monitor RH and temperature inside an environmental chamber or clean room without opening the door. Place the weatherproof (IPX3) sensor outdoors, in green houses, warehouses, air ducts and other hard to reach places and continuously…

  • …technology Infrared (IR) sensor features exclusive split-beam technology for precise CO2 control in fluctuating temperature and humidity conditions Rapid Humidity Recovery Large, directly heated water reservoir Recovery times are up to five times faster than conventional…

  • SCILA incubator

    INHECO GmbH

    …drawer-based positions for SBS micro plates in a copper incubation chamber with control of temperature, humidity, and gas atmosphere. The patented innovative drawer design moves the complete drawer mechanics outside of the incubation chamber, which makes the inside copper surface with rounded edges…

  • Maintain temperature and humidity records for buildings or controlled environment chambers. Use one-day rotation for detailed views of troubled areas, longer rotation times for routine records. A flashing LED indicates drum is rotating. Two size C batteries provide up to six months of…

  • …by insects. Units include: Microprocessor Control System P.I.D. Temperature Control LED Display of Set Point and Chamber Temperature Interior Electrical Outlet Access Port Passive Humidity Kit Fan Assisted Forced-Air Circulation Aluminum Interior 24 Month Limited…

  • …with a humidity pan. The easy to view color touch screen displays alarms, current temperature, set temperature, CO2 level, CO2 setpoint and the humidity level. This unit also features a USB drive and Ethernet port for downloading temperature, humidity and CO2

  • …unbalanced loads even at high speeds. Shakers operate in temperature ranges of 0°C to 40°C and humidity conditions from 20 to 80% noncondensing enabling them to be used in incubators, warm rooms, environmental chambers and refrigerators. Specially treated CO2 resistant…

  • …on all models including aging test on control electronics at 85°C and 85% humidity environment Unique insulated inner door design for four separate storage compartments to minimize frost buildup inside the chamber Specialized control system design for a well-balanced operation of cascade…

  • ST Series CO2 Incubators

    Benchmark Scientific

    Precision temperature control, 6-sided heating Precise monitoring over CO2 with dual beam IR sensor Seamless, stainless-steel chamber Digital control of humidity percentage (PLUS models only) With our unique and proprietary heat distribution technology, the Benchmark ST…

  • …2000 and 84 lb. on the 4000 with single platforms Operate in temperature ranges of 0° to 40°C (104°F), 20 to 80% noncondensing humidity Can be used in a variety of incubators, warm rooms, environmental chambers and refrigerators Feature a maintenance-free, solid-state DC…

  • Orbi-Shaker™ CO2 Orbital Shakers

    Benchmark Scientific

    …is designed for shaking, mixing and aeration applications in extreme environments, including CO2 incubators. It can withstand temperatures from 0 to 60°C and humidity levels up to 100%. To avoid contamination, unintentional release of gas or deviations from protocol, both speed and time are…

  • …applications. The Helix 150BLR has an extremely low heat signature and is ideal for operation within a 37 degrees Celsius CO2 incubator or humidity chamber. The long lasting brushless DC motor provides quiet operation and consistent shaking speed independent of the load or power supply fluctuations.…

  • …both Fahrenheit and Celsius Unique unit simultaneously displays time of day, temperature, and humidity. Individually serial-numbered Traceable® Certificates in the areas of time, temperature and humidity are provided from our ISO 17025 calibration laboratory accredited by A2LA. These…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.