Syringe Tubing

With KEL-F Luer hub.A septum to be pierced with these PTFE needles must be punctured with a hollow SS needle. The PTFE needle is then threaded through. After threading, the SS needle is withdrawn, allowing the septum to seal around the PTFE needle.For 20 ga PTFE use Z126756 (14 ga SS); 18 ga PTFE…

With KEL-F Luer hub.A septum to be pierced with these PTFE needles must be punctured with a hollow SS needle. The PTFE needle is then threaded through. After threading, the SS needle is withdrawn, allowing the septum to seal around the PTFE needle.For 20 ga PTFE use Z126756 (14 ga SS); 18 ga PTFE…

With KEL-F Luer hub.A septum to be pierced with these PTFE needles must be punctured with a hollow SS needle. The PTFE needle is then threaded through. After threading, the SS needle is withdrawn, allowing the septum to seal around the PTFE needle.For 20 ga PTFE use Z126756 (14 ga SS); 18 ga PTFE…

With KEL-F Luer hub.A septum to be pierced with these PTFE needles must be punctured with a hollow SS needle. The PTFE needle is then threaded through. After threading, the SS needle is withdrawn, allowing the septum to seal around the PTFE needle.For 20 ga PTFE use Z126756 (14 ga SS); 18 ga PTFE…

With KEL-F Luer hub.A septum to be pierced with these PTFE needles must be punctured with a hollow SS needle. The PTFE needle is then threaded through. After threading, the SS needle is withdrawn, allowing the septum to seal around the PTFE needle.For 20 ga PTFE use Z126756 (14 ga SS); 18 ga PTFE…

With KEL-F Luer hub.A septum to be pierced with these PTFE needles must be punctured with a hollow SS needle. The PTFE needle is then threaded through. After threading, the SS needle is withdrawn, allowing the septum to seal around the PTFE needle.For 20 ga PTFE use Z126756 (14 ga SS); 18 ga PTFE…

With KEL-F Luer hub.A septum to be pierced with these PTFE needles must be punctured with a hollow SS needle. The PTFE needle is then threaded through. After threading, the SS needle is withdrawn, allowing the septum to seal around the PTFE needle.For 20 ga PTFE use Z126756 (14 ga SS); 18 ga PTFE…

With KEL-F Luer hub.A septum to be pierced with these PTFE needles must be punctured with a hollow SS needle. The PTFE needle is then threaded through. After threading, the SS needle is withdrawn, allowing the septum to seal around the PTFE needle.For 20 ga PTFE use Z126756 (14 ga SS); 18 ga PTFE…

With KEL-F Luer hub.A septum to be pierced with these PTFE needles must be punctured with a hollow SS needle. The PTFE needle is then threaded through. After threading, the SS needle is withdrawn, allowing the septum to seal around the PTFE needle.For 20 ga PTFE use Z126756 (14 ga SS); 18 ga PTFE…

With KEL-F Luer hub.A septum to be pierced with these PTFE needles must be punctured with a hollow SS needle. The PTFE needle is then threaded through. After threading, the SS needle is withdrawn, allowing the septum to seal around the PTFE needle.For 20 ga PTFE use Z126756 (14 ga SS); 18 ga PTFE…

With KEL-F Luer hub.A septum to be pierced with these PTFE needles must be punctured with a hollow SS needle. The PTFE needle is then threaded through. After threading, the SS needle is withdrawn, allowing the septum to seal around the PTFE needle.For 20 ga PTFE use Z126756 (14 ga SS); 18 ga PTFE…

…lubricants based on the acclaimed Spectrum Two ™ FT-IR system. From a single batch analysis to fully automated batch runs with up to 192 samples (17 mm tubes) there is a system to suit all throughput requirements. OilExpress 4 can be upgraded to an OilExpress4 DUO to achieve even faster throughput.

…through fritted bubbler tube Ground glass joint fits into neck on standard 300 mL BOD bottle (see Thomas number 1781N43) Air inlet and outlet, 5 mm o.d.; insert check valve for positive flow protection With 6 rubber stoppers; syringe, bottle, connecting tubing and check valve not…

PTFE TUBING, ETFE NUT AND ETFE FERRULE KITS FOR RXNHUB PROGRAMMABLE SYRINGE PUMPS

We carry replacement parts for the OilExpress Autosampler, including the Solvent to Syringe Pump Tubing.

…MicroLiter to offer you proper solutions for management of your filtration products until you are ready to use them. MicroLiter syringe filters are packaged into tubes that are easily incorporated with our dispenser. The dispenser provides a safe, clean means of handling your filters once you open…

Syringe feed tubing made of long lasting medical quality silicone Available in various length, cut or uncut Autoclavable at 121°C / 250°F

Designed for easy sample loading with Luer Lock syringes, these needles are available in stainless steel or PTFE. Ideal for puncturing septum in air-sensitive samples PTFE needles offer a convenient way to wash your small volume tubes by minimizing the possibility of scratches

…flash detector lamps, flow cells, and a variety of tubing and capillary fittings. Cuvette and cutoff filter kits are also provided, each containing a range of components in different sizes to ensure effective use with any FLD. Glass syringes and needles can also be provided, and all replacement…

…range, for high injection precision, for high retention time reproducibility, and for low flow rate methods. Application: For HPLC, Purging Solvent Inlet Tubings This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Includes the dual syringe pump, two valves, cross tube assembly, two valve plugs, power supply, country-specific power cord, Custom Programmer Kit, and your choice of two syringes. If syringe volumes are not selected at the time of order, default 1 mL syringes will be included automatically. Please…

… Tubing Point Non-tapered   Tubing Threads M6 or 1/4-28   Tubing Volume 2042 µL   Type of Tubing Fill   Used with Syringe Volumes greater…

304 SS needle with chrome-plated brass Luer hub. Needle is designed with a slightly curved, deflecting tip to prevent coring during needle insertion through the septum. Standard Hub with 304 Stainless Steel Tubing

…Tyvek® / HDPE autoclave continuous form tubing is ideal for steam sterilization of pharmaceutical components such as vial and syringe stoppers and caps. Also a good choice for heavy equipment parts where visibility into the bag is required. Tubing form allows for excellent sizing flexibility.…

…lubricants based on the acclaimed Spectrum Two ™ FT-IR system. From a single batch analysis to fully automated batch runs with up to 192 samples (17 mm tubes) there is a system to suit all throughput requirements. OilExpress 4 can be upgraded to an OilExpress4 DUO to achieve even faster throughput.

…including acids and non-aqueous solvents, such as those used in GC and HPLC with the Thermo Scientific™ Nalgene™ 50mm Inline Syringe Filter with PTFE membrane. Also for sterile filtration of air and gases. Provides an excellent barrier for sterile venting of benchtop fermentors,…

PerkinElmer syringe kits for high pressure applications are manufactured for precise liquid delivery. All of these glass syringes come with precision stainless steel plungers. They are used for sampling and flushing and are available in a large variety of sizes.

Tube adapters serve many purposes. They can be used to stack one SPE tube on top of another to provide different selectivities. A larger empty syringe barrel can be stacked on top of a smaller SPE tube to act as a larger load reservoir. Or, they can serve as an adapter for positive pressure methods…

…Tube was developed for growing and maintaining anaerobic bacteria and culture conditions. method of hungate utilizes syringe methods for anaerobic. Technique: Exclude oxygen by flushing the tube with the desired gas Add 4.5mL of pre-reduced anaerobic agar medium into tube Seal the tube…

…connecting link between dispensers/controllers and Syringe barrels. They provide a safe connection for accident proof dispensing. Comes with a 3 foot (91cm) air tube hose. The assembly consists of the receiver head with fitted Viton o-ring, tubing and male quick connector. Sold individually.…