Filter Funnel, Microscale, Synthware, Joints: 14/20, Disc OD: 20mm, Disc Porosity: Medium.

SYNTHWARE round bottom, heavy wall, three neck flasks with standard taper outer joints on both the center neck and the angled side necks. All sizes are hand blown from tubing to ensure uniform wall thickness.

Kemtech America Microscope Slides in either Super White Glass or Green Glass. Many color options available with ground or beveled edges and 45 or 90 Degree corners.

Synthware Inert Gas Adapter has two hose connections 180 degrees from one another to provide a flow of inert gas over the apparatus. The joints are standard taper inner joints.

Solvent Transfer Manifold Joints: 24/40 Valve Size: 0-4mm Overall Height: 140mm Overall Width: 380mm

SYNTHWARE round bottom, heavy wall, flask with standard taper outer joint and threaded side port. All sizes are hand blown from tubing to ensure uniform wall thickness. Side port is for insertion of thermometer or bleed tube having an O.D. between 5mm and 7.5mm.

SYNTHWARE chromatography flow adpater with a 0-4 mm high vacuum PTFE valve with metering tip to adjust the air pressure. The o-rings on the valve are completely encapsulated with a thin layer of PTFE, making it inert to most chemicals. Foruse with columns having a Rodaviss 24/40 outer joint.

Dewar Flask, Low Form, Hemispherical Multiple sizes available, with aluminum base to allow transfer of magnetic field. *Due to extra high vacuum, the Dewar flasks still have a rare possibility to explode, so working behind a safety shield in hood and always wearing goggles are strongly recommended.

Storage Box, Adjustable Compartments, Synthware, Polypropylene, for storage of 14/10 microscale kit components.

Round Bottom Flask, Micro Scale, Synthware, Capacity: 25, or 50mL available, Joints: 14/10 threaded.

Synthware vacuum adapter has a standard taper outer joint and a serrated hose connection. Ideal for use as a vent or for the introduction of pressure/vacuum.

With the condenser being a combination of a cold coil and Leibig. Top outer joint is a 10/18 for use with a 50mm immersion thermometer. For best result, use D272440.

Distillation Condenser, Vacuum Jacketed, Joints: 14/20 and 24/40 available, Jacket Height: 130mm and 250mm available, with 12mm ID indentations to support packing material **NOTE THESE PRODUCTS COME IN DIFFERENT SIZES - WHAT IS PICTURED MAY NOT BE THE ITEM SOLD**

Hickman Still Head, Synthware, Joint: 14/10, for microscale fractional distillation, supplied with one compression cap, one Viton O-ring and one PTFE-faced silicone septum.

Stopcock, Double Oblique, PTFE, Synthware, Bore: 2 or 4mm available, Plug Size: 12.9/44 or 14.4/44 available, Stem OD: 8 or 10mm available.

Cylindrical magnetic stir bar with pivot ring. various sizes available.

Dewar Condenser, Micro Joints: 14/20 Inside Depth: 90mm Inside Diameter: 31mm Side joint is at 90 degree angle.

Used with plain stem Buchner funnels and pluro-stopper. Hose connector has an O.D. of 10mm at the largest serration. Joint is a standard taper inner joint. Pluro-stoppers are not included.

Trap is placed between the vapor tube and the evaporation flask. This design prevent possible contamination in the event of bumping. With upper outer and lower inner standard taper joints.

Buchner Filter Funnel with a sealed in Perforated Plate Capacity: Available in sizes ranging from 60-600 mL Glass Disk Size: Available in sizes ranging from 42-90mm. Not recommended for filtration where pressure will exceed 15 psi

Heat Transfer Block, Round bottom flasks, Synthware, Holds 5, 10 and 25mL round bottom flasks.

Connecting Tube, T-shaped, Synthware, Tubing OD: 8 and 10mm available.

Separatory Funnel, PTFE Stopcock PTFE or Glass Stopper Capacity: 10-1000mL Stopper Joint: 14/20, 19/22, 24/40, 29/42, No. 13, No. 22, No. 27 and No. 16 available Stopcock Bore: 2 or 4mm

Backlit LCD Display Temperature Range: Room Temp-340°C 5" Heating Plate Speed Range: 100-1500rpm

Vacuum Trap, Hose Connections Available in multiple sizes with various joint sizes, diameter, length, and inner/side tube size.

General purpose manifold with 2mm or 4mm Teflon® stopcocks. Main tube is 22mm O.D. with serrated hose connection (10mm O.D.). Delivery ports have 10mm serrated hose connections. Distance between stopcocks is 75mm.

Solvent Still, Built-In Condenser Capacity: 125mL Joints: 24/40 Threaded Side Port: 14/10

SYNTHWARE modified Schlenk flask with a standard taper outer joint and a 2mm bore PTFE stopcock in side arm. The Kjeldahl shape permits easy transfer of liquids and solids. The lower portion of the flasks fits standard heating mantles to facilitate heating and stirring.

Heavy Wall Beaker, Low Form, Dual Graduation, 250 mL, 10/pack

Set comes with 8 sizes. Stoppers are to be used with Buchner and Fritted glass funnels.

Kemtech America Cover Glass in Boro 3.3. Cover Glass available many dimensions and come in either 1mm or 1.5mm thickness. Individually wrapped by Aluminum vacumm pack with desiccant.

Pressure Vessel, Heavy Wall, Cylindrical, Synthware, Capacity: 15-120mL available, GL Thread Size: 15, Vessel has an internal thread for use with PTFE bushing, O-ring is positioned above the thread for inproved sealing.