Swagelok Valve

Compare Tool

Select up to 3 products

Swagelok Valve
1 - 24 of 24
Sort
View
Show
  • TO-Can Air Sampling Canisters with Swagelok SS4H Bellows Valve

    Restek

    ?Proprietary electropolished surface that maintains compound stability. High quality, Bellows-design valve. Now also available with new RAVE valve. U.S. EPA Methods TO-14A and TO-15 regulate the collection, storage, and analysis of volatile organic compounds (VOCs) using treated air…

  • Pressure Vacuum Valve NMR Tubes

    Wilmad-LabGlass - SP Scienceware

    …(<300 psi) and ultra vacuum (10-8 torr) experiments. Connect to a 1/8" metal (SST or brass) vacuum line using Swagelok® fittings Pressure vacuum valve is made of PTFE, all other parts are Pyrex® or equivalent Due to the nature of glass, Extreme Caution should be…

  • HTC Pal Liquid Injection Valve Supplies

    Agilent Technologies

    …has the new Rheodyne 7996 High Pressure 600 bar valve or Valco Cheminert injection valves, Agilent offers a wide selection of sample loops to meet your application needs. Loops for the Rheodyne 7996 valve are supplied with Swagelok fittings required for high pressure Cheminert…

  • Toggle Valves

    Swagelok

    Toggle Valves Quick opening or closing Rugged, compact design Available in brass or 316 stainless steel

  • Ball Valves

    Swagelok

    …steel valves allow bi-directional flow, have virtually no dead space and are easily cleaned or purged. One-piece body eliminates multiple seal points. Stem design allows packing adjustment with the valve in-line and panel mounting. Handle shows orifice position. Orifice openings: 1/8” valve -…

  • Meter Valves

    Swagelok

    …Metering valves gives very fine control of gas flow between 100 and 800 cc/min. Valve is not designed for shutoff service. The handle dead stop is factory set at a flow rate of 3 to 10 cc/min with 15 psig inlet air pressure. 8 to 12 turns of the stem are required to fully open the valve. Length…

  • Check Valves

    Swagelok

    C, CA, CH, CP, and CPA Series Working pressures up to 6000 psig (413 bar) Adjustable and fixed cracking pressures Variety of end connections 316 stainless steel and brass materials

  • Nupro Plug Valves

    Swagelok

    …assembly and handle. Plug and O-ring seals are TFE coated to provide lubrication between plug assembly and the body bore. Valve features very low torque operation. Intermediate valve positions allow forward flow throttling. Straight-through flow minimizes pressure loss. System pressure acts on equal…

  • Integral Bonnet Needle Valves

    Swagelok

    O, 1, 18, 20, and 26 Series Live-loaded packing system Compact design Working pressures up to 6000 psig (413 bar) Temperatures up to 600°F (315°C)

  • Flasks, 3-Necks, Round Bottom, with Drain Valves

    Chemglass

    …taper outer joints on center and side necks. Lower outlet is a CG-911-A extended tip which fills the seat area and permits total agitation of the contents of the flask. Once opened the contents of the flask will drain through the sidearm. The sidearm on the CG-911-A valve is 1/2" Swagelok®.

  • Splitter Distillation, Reflux

    Ace Glass

    Reflux distillation splitter adapter for all sizes of reactors. Standard taper inner joint bottom and reinforced outer joint top. Straight path splitter intended for use with 90 degree vertical joints. 0-10mm side valve with precision ground swagelok v

  • LC Fittings and Unions

    Agilent Technologies

    Different columns have different fitting requirements. (Zorbax columns use standard Swagelok fittings) Agilent 1100 modules use standard Swagelok fittings Rheodyne injection valves require Rheodyne fittings How do you choose the correct fittings? To ensure leak-free connections, and to prevent…

  • Lower Reservoirs, Gas Scrubbers

    Chemglass

    …and 2ea 24/40 outer joints. Drain valve is a 0-14mm with Perfluoro o-rings. Valve is offset from the bottom of the flask to permit solids to settle and not clog valve or damage the fluid pump head. Connection on the outlet of the valve is 1/2 " Swagelok® glass tubing for use with CG-1975…

  • Reaction Vessels, Jacketed, Benchtop

    Chemglass

    …be used down to -60° C. The sidearm on the CG-911-A valve is 1/2in Swagelok®. Vessels with capacities 2L and larger, use the CG-511-02 style drain valve. The sidearm on the CG-511-02 valve is 3/4in Swagelok®. Both valves are designed to seal flush with the bottom of the flask avoiding…

  • Reaction Vessels, Jacketed, Benchtop, Tool-Free Flat Flanges, Jacketed Lab…

    Chemglass

    …be used down to -60° C. The sidearm on the CG-911-A valve is 1/2” Swagelok®. Vessels with capacities 2L and larger, use the CG-511-02 style drain valve. The sidearm on the CG-511-02 valve is 3/4” Swagelok®. Both valves are designed to seal flush with the bottom of the flask…

  • Manifold, Vacuum, Firestone

    Ace Glass

    …Purge Valve at one end and 0-5mm High Vacuum, Easy Action PTFE Stopcock ports with 3/8" 0.D. Swagelok tubing connections. Each connection has an O-Ring groove (O-Rings supplied) for use with #11 Ace-Thred. Valve eliminates the need for a second tube. Shut-off float on gas side of valve prevents…

  • Gas Analyzer Standards And Accessories

    Agilent Technologies

    …NPT swivel to cylinder, 1/16 in. SS compression fitting to GC, Pressure gauge range: 0 to 400 psi, Flow range: Dedicated 20 ml/min ± 5% Specifications: 1/16 in. Stainless Steel tubing, 610 mm long, 0.038 in. id with two 1/16 in. Stainless Steel Swagelok nuts, front ferrules, and back ferrules

  • Single-Stage Pneumatic Gas Regulator

    PerkinElmer

    …for driving the pneumatic valves of the PerkinElmer 2400 and PerkinElmer 2410. It has a maximum inlet pressure of 3000psi and a CGA fitting size of 590, which is appropriate for air. A 590 to 580 adapter, for use with nitrogen or argon, is also included, as is a Swagelok 1/4in npt to 1/4in fitting…

  • High-Purity Brass Regulator (Single Stage), CGA-350, Use:H2 and Ar/CH4 mixes

    PerkinElmer

    …recommend that you consult your local gas supplier first to determine the proper tank regulator required. All regulators have an outlet shutoff valve and terminate in a 1/4 in. NPT fitting with male threads. High-purity Brass Regulators are constructed of high-purity brass barstock, and have…

  • Replacement Filter Element for the Final Filter for the shear gas

    PerkinElmer

    …We recommend that you consult your local gas supplier first to determine the proper tank regulator required. All regulators have an outlet shutoff valve and terminate in a 1/4 in. NPT fitting with male threads. High-purity Brass Regulators are constructed of high-purity brass barstock, and have…

  • High-Purity Brass Regulator (Single Stage), CGA-350, Use:He

    PerkinElmer

    …recommend that you consult your local gas supplier first to determine the proper tank regulator required. All regulators have an outlet shutoff valve and terminate in a 1/4 in. NPT fitting with male threads. High-purity Brass Regulators are constructed of high-purity brass barstock, and have…

  • Helium or Argon Gas Regulator

    PerkinElmer

    …constant delivery pressure regardless of variations in cylinder pressure. Maximum inlet pressure is 3000psi, and the CGA fitting size is 580. A Swagelok™ 1/4in npt to 1/8in fitting (P/N 09903471) is included. Your elemental analyzer uses several gases. High purity oxygen (99.995 mole percent…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.