Surface Protector

Compare Tool

Select up to 3 products

Surface Protector
1 - 32 of 89
Sort
View
Show
  • Protects surfaces and absorbs liquids Protect benchtops, floors and carts with this highly absorbent cover. Keeps spills from spreading. Cushions the surface while absorbing liquids. Backing is waterproof and resistant to most chemicals. Made of highly absorbent three-ply tissue with a…

  • Cytiva Whatman Benchkote surface protector is an absorbent lab paper that protects surfaces against hazardous spills. After use, the bench protector sheet is incinerated or disposed of according to local regulations. Strong: Benchkote surface protector is strong and tear resistant when wet or…

  • Scienceware® Labmat™ Bench Liner

    Bel-Art - SP Scienceware

    …clean-up and protects work surfaces from stains, spills and wear Cuts easily to desired size with scissors or the Scienceware Safety Cutter Non-skid plastic backing stops most solutions from soaking through, while the highly absorbent upper surface traps up to 420ml/m 2 of water,…

  • Benchkote Plus bench protector is a thicker, more absorbent version of Cytiva original Benchkote bench paper for demanding or hazardous applications. It can absorb more than 0.75 liters of water per square meter. Strength: Benchkote Plus bench liner is strong and tear resistant when wet or dry …

  • SpillStopper Work Surfaces are compatible with Protector (Premier or XStream) Laboratory Hoods with Eco-Foil(TM) Air Foil. Molded from a special formulation of corrosion-resistant epoxy resins, these work surfaces are dished and contoured to conform to the interior liner of Protector Laboratory…

  • SpillStopper Work Surfaces are compatible with Protector (Premier or XStream) Laboratory Hoods with Eco-Foil(TM) Air Foil. Molded from a special formulation of corrosion-resistant epoxy resins, these work surfaces are dished and contoured to conform to the interior liner of Protector Laboratory…

  • SpillStopper Work Surface molded of corrosion-resistant solid epoxy. Dished & contoured to conform to interior liner of Protector Pass-Through Hoods. Pre-drilled 2.5" (6.4cm) dia plumbing holes.

  • Molded of corrosion-resistant epoxy resins, dished & contoured to conform to interior of ClassMate Hoods. Pre-drilled 1.5" dia holes for venting & 2.5" dia holes for plumbing.

  • Protector Work Stations are an asset in cramped or crowded labs as they feature a low profile to fit easily under standard upper cabinets. Protector Work Stations without built-in blower are designed for connection to a remote blower or house exhaust system. Available work surface is…

  • …work surface. Depending on sash position, tendencies for air turbulence, vortexing and “the roll” frequently observed during traditional fume hood smoke tests are virtually eliminated. Safety is foremost, but energy savings is equally impressive. Operating a 6' Protector XStream…

  • Standard or extra height models 2-, 3- or 4-feet wide Protector XVS Ventilation Station provides user protection by keeping powders and fumes contained during light duty, fume-generating or weighing procedures. Patented features include air foil with Clean-Sweep openings to enhance airflow and…

  • Protector Vacuum Pump Storage Cabinets provide an enclosed space for storing vacuum pumps. Durable, glacier white powder-coated steel construction complements laboratory casework and Labconco fume hoods. Features: a single, manual-closing, non-locking door with left or right hinge; one 115V, 60 Hz…

  • …individual installation and application requirements. Protector XL Benchtop Laboratory Hoods are suitable for general chemistry applications. Features By-pass airflow design Curved air foil allows air to sweep the work surface while Clean-Sweep™ openings pull inflow air from…

  • Protector Pass-Through Laboratory Hoods offer sashes on two sides allowing operation on either side of the fume hood. An audible alarm sounds to prevent simultaneous opening of both sashes. With unobstructed visibility from either side, this hood is ideal for conducting chemistry demonstrations. …

  • Protector Pass-Through Laboratory Hoods offer sashes on two sides allowing operation on either side of the fume hood. An audible alarm sounds to prevent simultaneous opening of both sashes. With unobstructed visibility from either side, this hood is ideal for conducting chemistry demonstrations. …

  • Protector Pass-Through Laboratory Hoods offer sashes on two sides allowing operation on either side of the fume hood. An audible alarm sounds to prevent simultaneous opening of both sashes. With unobstructed visibility from either side, this hood is ideal for conducting chemistry demonstrations. …

  • The patented Protector ClassMate Laboratory Hood is designed to meet the needs of instructional laboratories. Clear back and sides and taller front viewing window provide enhanced visibility for conducting chemistry demonstrations or observing students using the hood. The clear back also does not…

  • …adaptable fully-featured fume hood that requires NO DUCTING for easy installation! The Protector® Echo™ Filtered Fume Hood has a by-pass design and features many defining characteristics of Labconco Protector Hoods including the patented Eco-Foil™ Air Foil with Clean-Sweep openings,…

  • …adaptable fully-featured fume hood that requires NO DUCTING for easy installation! The Protector® Echo™ Filtered Fume Hood has a by-pass design and features many defining characteristics of Labconco Protector Hoods including the patented Eco-Foil™ Air Foil with Clean-Sweep openings,…

  • …adaptable fully-featured fume hood that requires NO DUCTING for easy installation! The Protector® Echo™ Filtered Fume Hood has a by-pass design and features many defining characteristics of Labconco Protector Hoods including the patented Eco-Foil™ Air Foil with Clean-Sweep openings,…

  • …thermoplastic protectors are super-resistant to solarization and last longer than traditional UV protectors. Each protector covers the transilluminator platform completely. Attached rubber bumpers keep protector in place and minimizes heat build-up at transilluminator surface. Allows manipulation…

  • …adaptable fully-featured fume hood that requires NO DUCTING for easy installation! The Protector® Echo™ Filtered Fume Hood has a by-pass design and features many defining characteristics of Labconco Protector Hoods including the patented Eco-Foil™ Air Foil with Clean-Sweep openings,…

  • …adaptable fully-featured fume hood that requires NO DUCTING for easy installation! The Protector® Echo™ Filtered Fume Hood has a by-pass design and features many defining characteristics of Labconco Protector Hoods including the patented Eco-Foil™ Air Foil with Clean-Sweep openings,…

  • Surface covering for the protection of valuable glassware A resilient surface that helps to cushion and protect sensitive instruments. Can be easily cut to exact desired size. May be taped or otherwise secured in place. Both sides are usable. Inscriptions with  Identi-Marker  pens…

  • …adaptable fully-featured fume hood that requires NO DUCTING for easy installation! The Protector® Echo™ Filtered Fume Hood has a by-pass design and features many defining characteristics of Labconco Protector Hoods including the patented Eco-Foil™ Air Foil with Clean-Sweep openings,…

  • …adaptable fully-featured fume hood that requires NO DUCTING for easy installation! The Protector® Echo™ Filtered Fume Hood has a by-pass design and features many defining characteristics of Labconco Protector Hoods including the patented Eco-Foil™ Air Foil with Clean-Sweep openings,…

  • …adaptable fully-featured fume hood that requires NO DUCTING for easy installation! The Protector® Echo™ Filtered Fume Hood has a by-pass design and features many defining characteristics of Labconco Protector Hoods including the patented Eco-Foil™ Air Foil with Clean-Sweep openings,…

  • …adaptable fully-featured fume hood that requires NO DUCTING for easy installation! The Protector® Echo™ Filtered Fume Hood has a by-pass design and features many defining characteristics of Labconco Protector Hoods including the patented Eco-Foil™ Air Foil with Clean-Sweep openings,…

  • …adaptable fully-featured fume hood that requires NO DUCTING for easy installation! The Protector® Echo™ Filtered Fume Hood has a by-pass design and features many defining characteristics of Labconco Protector Hoods including the patented Eco-Foil™ Air Foil with Clean-Sweep openings,…

  • …adaptable fully-featured fume hood that requires NO DUCTING for easy installation! The Protector® Echo™ Filtered Fume Hood has a by-pass design and features many defining characteristics of Labconco Protector Hoods including the patented Eco-Foil™ Air Foil with Clean-Sweep openings,…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.