Support Stand

Compare Tool

Select up to 3 products

Support Stand
1 - 32 of 238
Sort
View
Show
  • Cast Iron Support Stands with Rods

    United Scientific Supplies

    These support stands feature a heavy cast iron base with black enamel finish. Each base includes a removable zinc plated rod.

  • Cast Iron Base Support Stand

    GSC International, Inc.

    Support Stand made from cast iron, with an enamel finish that is acid resistant. Includes a zinc plated steel rod that screws into the base support. Available in the following sizes: 4x6" Base, 5/16" x 18" Rod 5x8" Base, 3/18" x 20" Rod 6x9"…

  • Support Stands with Rods

    United Scientific Supplies

    These support stands with rods come complete with a stamped steel base with black enamel finish and a removeable zinc plated steel rod.

  • LabJaws Support Stands

    Ohaus

    …× 10.5" (267 mm) deep overall. The stainless steel support rod is 0.63" (16 mm) in diameter and is screwed to the support base. Two additional threaded holes in the base legs accommodate rods, enabling the stand to support two mixers. The “U” shape of the base should be…

  • Triangular Base Support Stands

    Humboldt

    Powder-coated with plated steel rod

  • Plastic Support Stands

    United Scientific Supplies

    These non corrosive molded support stands provide excellent alternatives to metal ones. Even the metallic rod has a polypropylene covering making it non corrosive. Each support base comes with a 0.5" diameter 30" long rod.

  • 2 Hole Support Stands with Rods

    United Scientific Supplies

    These stamped steel bases feature 2 tapped holes for the rods. Hole at the center of the shorter side is for standard ring stand use. Hole at the center of the longer side is for titrations, specific gravity determinations, etc. Each base includes a zinc plated steel rod.

  • Support Stand for Big Columns

    Ace Glass

    Support stand for larger columns with #50 or #80 Ace-Threds. Supplied with heavy U shaped base, two support rods 5/8" diameter by 29 long and one rod 5/8" by 5' long. Three threaded holes are in base legs to accommodate rods. Complete unit consists of Stainless Steel U shaped base, one 5/8 x 5' rod,…

  • Connector, T-Type

    Harvard Apparatus

    Made of glass-filled nylon For mounting clamps and adapters that have a male connector to vertical lattice rods or laboratory stands One end has open side to clamp rod up to 1/2” (13 mm) diameter and lock with thumbscrew. Opposite end has female socket 3/4” (19 mm) deep that…

  • Lab Stand

    Glas-Col

    Horseshoe-base laboratory stand with 11/16 (17mm) diameter stainless steel mast. Accepts containers up to 9" (229mm) diameter. Designed for durability, these lab stands are designed for the lab bench

  • Scienceware® Lattice Support Stand

    Bel-Art Products

    …maximum capacity of items Extended polypropylene base allows for extra items to be added Rigid, solid aluminum rods provide extra support for small lightweight items such as glassware as well as heavy items such as mechanical stirrers. Sturdy polypropylene base provides maximum stability…

  • Stamped Steel Base Support Stand

    GSC International, Inc.

    Support Stand made from a stamped steel with an enamel finish that is acid resistant. Includes a zinc plated steel rod that screws into the base support. Available in the following sizes: 4x6" Base, 5/16" x 18" Rod 5x8" Base, 3/18" x 20" Rod 6x9"…

  • Heavy-Duty Support Stands

    Ohaus

    Heavy-Duty Support Stands have a four point cast iron base with stainless steel support rod. They are designed to accommodate vessels up to 12" (30.5 cm) in diameter to sit close to the support rod. They have rubber cushions on each of the four corners. The base area is 16.5" (41.9 cm)…

  • Support Stands with Rod and Rings Sets

    United Scientific Supplies

    Each set contains a stamped steel base and rod along with 2, 3, 4, or 5 cast iron rings with clamps. Sets are shipped in specially designed boxes.

  • Scienceware® Support Stand with Center Rod

    Bel-Art Products

    Excellent for use in severe corrosive conditions, this stand has no exposed metal parts. The base has a smooth surface for easy cleaning. Corrosion-resistant polypropylene base Three rod positions for mounting at center or either end of base Polypropylene coated rod measures 12.5mm (1/2”…

  • Porcelain Support Stands with Rods

    …with glazed finish to prevent chemicals from seeping into the base. Base includes rubber feet to ensure the base does not slide or damage bench surface. Hole for rod is located in the center of the base. Includes a removable aluminum support rod. Stainless steel support rod is available separately.

  • Tubing Support Stand

    DWK Life Sciences (Wheaton)

  • Heavy Support Stands with Rods

    United Scientific Supplies

    These stamped steel bases feature an added steel plate on the back which makes them about 50% heavier than regular stamped steel bases. The steel plate also facilitates a sturdier threading of the rod into the base.

  • Ring Stands

    Thomas®

    Ring stand consists of enameled steel support base with zinc-plated steel rod (8835B50 series) and 8091C20 series rings of zinc-plated steel with aluminum screw clamp Ring Stands include one each 64, 89, 114 mm rings Ring Stand Listings indicate base dimensions and rod height

  • Support Stand

    Ace Glass

    Tripod support for bottom of Ion-exchange columns. Metal support has hole large enough for end fitting to pass through so that shoulder of column rests on plate. Column should also be stabilized with a clamp such as 11079. For use only with 100mm and 150mm diameter columns. Height, 14".

  • A-Base Support Stand

    GSC International, Inc.

    Cast Iron Support Stand, Legs 7.75" L, Nickel Plated Steel Rod 23"

  • Support Stand Clamps

    Ohaus

    … Accommodates 1/2 inch to 5/8 inch diameter shaft of Talboys motor support and rod of 8596B10 support stand Stainless Steel Construction Strong aluminum alloy with a brushed finish and large knobs facilitate easy tightening Rods supported on 4 inch long surface to avoid vibration and wobble

  • Scienceware® Compact Support Stand

    Bel-Art Products

    Compact Size Saves Bench Space This non-corrosive support stand with stainless steel mounting rod provides modern advantages over metal ring stands. The compact polypropylene base has a smooth surface making cleaning easy, and measures 21 x 16cm (8-1/4 x 6-1/4”) x 4.5cmH (1-3/4”). At a weight…

  • WaterPro Support Stand

    Labconco

    Support Stand for converting wall-mounted WaterPro RO Station or WaterPro PS Polishing Station to bench-mounted. Rests on a countertop or other horizontal surface. Constructed of epoxy-coated steel. Includes hardware to mount WaterPro RO or PS to the stand. Dimensions (with WaterPro RO or PS…

  • Support Stand with Ring

    GSC International, Inc.

    Ring Stand Sets with Cast Iron Bases & Cast Iron Support Rings 4x6 base, 2 rings - sizes 3 & 4 inch OD 5x8 base, 3 rings - sizes 3, 4, 5 inch OD 6x9 base, 4 rings - sizes 3, 4, 5, 6 inch OD 6x11 base, 5 rings - sizes 2, 3, 4, 5 & 6 inch OD

  • Support Stand, Stainless Steel

    Ace Glass

    support stand. Heavy base (6 lbs) can accomodate vessels up to 18" in diameter. Available with either 28" or 36" high 5/8" diameter support rods fastened to the base with lock nuts. Two additional threaded holes in the base will accept extra support rods. For additional support

  • Support Stand, Bench-Top

    Ace Glass

    Stand assembly for 1L to 6L bench reactors. Fits both filter and pressure reactor styles as well as standard round bottom flasks. It will accomodate flasks with or without bottom valves. The motor mount raises and lowers as does the flask support system. This aids in aligning the flask, motor and…

  • LabJaws Tripod Base Support Stand

    Ohaus

  • LabJaws U-Shaped Base Support Stand

    Ohaus

    7 x 7" (178 x 178 mm)

  • Support Stand Oxygen Removal Column

    Labconco

  • LabJaws Rectangular Base Support Stands

    Ohaus

    Cast iron support stand bases are constructed with black enamel finish for chemical resistance and durability. All bases feature a built-in support rod holder with locking knob that accepts a 0.51" (13 mm) diameter support rod. U-shaped base features three built-in support rod holders and…

  • Support Stand, Kilo Scale Reactors

    Ace Glass

    …reactor support stand Thomas No. 1165L81 Bracing set to further strengthen the Universal Stand²against the weight of our explosion proof motor. Set²consists of two braces. Thomas No. 1165L82, 1165L83, 1165L84 Redesigned, modular Kilo scale reactor support stand

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.