Support Rod

Compare Tool

Select up to 3 products

Support Rod
1 - 32 of 303
  • 17" Support Rod Kit


    17" Support Rod Kit is ideal for creating an adjustable support stand to mount various items such as thermometer clamps, temperature probes, flasks and column clamps. The kit allows users to mount a 17" vertical support rod to the deck of a 6" x 6", 8" x 8" or 10"…

  • Clamp and Support Rod


    Highly versatile, the rod height can be locked into any position by a simple thumbscrew located on the outer edge of the clamp. The clamp features a sturdy handle for tightening the unit on the edge of a table top up to 1-1/2" (38mm) thick. The plated, solid steel rod is 1/2" (13mm) in diameter by…

  • Support Rods Stainless Steel

    Ace Glass

    303 stainless steel support rods, 13mm (1/2") O.D. for use in place of aluminum or fiberglass. For use with all standard laboratory connectors.

  • Stainless Steel Support Rods


    Stainless steel support rods screw into the base of hot plate stirrers. 1233W96 rods measure 5/16” x 18” and are for PC-400/410/420 series hot plate stirrers. 1233W97 rods measure 7/16” x 24” and are for PC-600/610/620 hot plate stirrers.

  • Vertical Support Rods


    This stainless steel vertical support rod is 10mm OD and 450mm in length. One end has M10 thread to fit into back right hand corner of hot plate stirrers.

  • Clamp and Support Rods


    Designed to allow users to mount rod vertically or horizontally. The clamp is cast iron with a black enamel finish. Supplied complete with a 3/8" x 20" (10mm x 508mm) rod (H-21350) or a 1/2" x 24" (13mm x 610mm) rod (H-21360).

  • Support Rods, Fiberglass

    Ace Glass

    Fiberglass support rods, 13mm (1/2") O.D., for use in place of aluminum rods that pit or become unsightly when used in corrosive atmosphere. Off-white or black color of these rods lends a more attractive appearance to lab setups. For use with all standard laboratory connectors.

  • Support Rod Conn. For Wall Mounting Unit


  • Radleys Starfish Monifolds, Clamps and Support Rods


    …of a wide range of glassware from 20 mm to 60 mm in diameter. Users have a choice of two support rods, both 12 mm in diameter: the 650 mm one-piece rod and the two-piece 650 mm split rod. The split rod has a threaded joint halfway along its body, which allows for shorter assemblies and easier…

  • Triangular Supports with Rods

    United Scientific Supplies

    Heavy cast iron triangular bases with black enamel finish include a zinc plated steel rod.

  • Corning® 18 x 5/16" Stainless Steel Support Rod


    Corning offers a stainless steel, two piece, 18" (45.7cm) support rod with a 5/16" (0.8cm) diameter that consists of two 9" rods that screw together. It screws into the base of Corning hot plate and stirrer models PC-400/410/420, PC-400D/410D/420D and PC-600D/610D/620D.

  • Support Stands with Rods

    United Scientific Supplies

    These support stands with rods come complete with a stamped steel base with black enamel finish and a removeable zinc plated steel rod.

  • Porcelain Support Stands with Rods

    United Scientific Supplies

    …with glazed finish to prevent chemicals from seeping into the base. Base includes rubber feet to ensure the base does not slide or damage bench surface. Hole for rod is located in the center of the base. Includes a removable aluminum support rod. Stainless steel support rod is available separately.

  • Rectangular Enameled Steel Support Bases And Rods


    …steel rod is machined at lower end with U.S. National coarse thread 508 mm rod is 9.5 mm in diameter with 3/8-16 thread; 610 and 914 mm, 13 mm in diameter with 1/2-13 thread 8835B50 support is furnished with 8835C18 rod; 8835B60 with 8835C24 rod; 8835B70 with 8835C36 rod. Listings…

  • Heavy Support Stands with Rods

    United Scientific Supplies

    These stamped steel bases feature an added steel plate on the back which makes them about 50% heavier than regular stamped steel bases. The steel plate also facilitates a sturdier threading of the rod into the base.

  • Universal U-Shaped Support Base And Rod


    Eberbach Labtools 7560 Universal Support, Order No. 7560 - 3/4" dia x 34" L 2 section nickel-plated steel support is mounted in iron base Base has 5 threaded holes for convenient rod placement Breaks down into compact unit Package size 18-1/2" x 4" x 2" …

  • Support Stands with Rod and Rings Sets

    United Scientific Supplies

    Each set contains a stamped steel base and rod along with 2, 3, 4, or 5 cast iron rings with clamps. Sets are shipped in specially designed boxes.

  • 5/16" X 12" Support Rod (For Use With PC-200, PC-210, PC-220)


    These 5/16 x 12 inch stainless steel support rods screw into the base of Corning® PC-200/210/220 series hot plate/stirrers.

  • Support Foot for Lattice Rods

    Bal Supply

    The support feet are of non-ferrous alloy, two inches in diameter, 16mm high, with set screw for fastening lattice frame rods. Provided without mounting screws. Foot has four holes for attaching to bench, floor or wall.

  • Scienceware® Support Stand with Center Rod

    Bel-Art - SP Scienceware

    … Corrosion-resistant polypropylene base Three rod positions for mounting at center or either end of base Polypropylene coated rod measures 12.5mm (1/2” x 76cm (30”) long Deep thread, sturdy tightening knob secures rod and prevents it from turning Base measures 21.5 x 40.5cm…

  • Cast Iron Support Stands with Rods

    United Scientific Supplies

    These support stands feature a heavy cast iron base with black enamel finish. Each base includes a removable zinc plated rod.

  • 2 Hole Support Stands with Rods

    United Scientific Supplies

    These stamped steel bases feature 2 tapped holes for the rods. Hole at the center of the shorter side is for standard ring stand use. Hole at the center of the longer side is for titrations, specific gravity determinations, etc. Each base includes a zinc plated steel rod.

  • Rod, Support 18" for Lab Jacks


  • Support Clamp for Laboratory Frame Rods


    Compatable with BriskHeat Metal Housed Heating Mantles. Accommodates up to a 13mm diameter rod.

  • Support/Holding Rod Thermometer & Sensor


    A 11mm x 130mm stainless steel horizontal support/holding rod.

  • Support Rings


    …basic wire circle is welded to shank (except 2" size). Aluminum muff. Attaches to support rods up to 3/4" (19mm) in diameter. Extension Rings Shank of Extension Ring clamps to support rods with clamp holder. Manufactured from steel wire, zinc-plated for corrosion resistance.

  • Funnel Support


    The Humboldt Funnel Support is designed to accept up to four funnels. The unit consists of a hard wood support with four slotted holes and a metal clamp with thumbscrew for support rod mounting.

  • Electrolytic Support


    The "Hoffman Type" Electrolytic Support is used with associated glassware to demonstrate the electrolytic decomposition of water, hydrochloric acid, and other solutions. The unit consists of a cast iron base (H-21225) with insulated binding posts, support rod (H-21360), one burette clamp (H-8022),…

  • Support Base


    SUPPORT BASES, RECTANGULAR SHAPED Base is made of cast iron with a black baked finish. Dimensions are 140 x 200mm. Base has two holes, one centered and one at the end of the short side. Rod is 10mm O.D. x 600mm (24”) in height. Total assembled weight is 1Kg. SUBLIMATION APPARATUS,Two-piece…

  • Support Stand, Stainless Steel

    Ace Glass

    support stand. Heavy base (6 lbs) can accomodate vessels up to 18" in diameter. Available with either 28" or 36" high 5/8" diameter support rods fastened to the base with lock nuts. Two additional threaded holes in the base will accept extra support rods. For additional support

  • Deluxe Support Stands

    United Scientific Supplies

    …a welded plate on the mounting hole. This gives the support rod 10mm of screw support, which is three times thicker than other traditional stands. The support rod includes an 80mm long rod to provide more torque when securing the rod to the base plate. Includes a removable, zinc-plated steel rod.

  • A-Base and Rod

    United Scientific Supplies

    The A-shaped base is made of rugged cast iron for extra stability. It has 22cm long legs and features a baked on black chemical resistant finish. The rod is zinc plated steel, 61cm long and 12mm in diameter.

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.