Sublimation Apparatus

Compare Tool

Select up to 3 products

Sublimation Apparatus
1 - 12 of 12
Sort
View
Show
  • Sublimation Apparatus, Synthware, Capacity: 100 or 150mL available, Flange Size: 57 or 80mm available, supplied complete with condenser, flask, O-ring and horseshoe clamp.

  • Economical, small scale, sublimation apparatus. Crystals form in the cone and are easily removed through the vacuum connection at the top. The unique design allows the user to submerge the flask in an oil bath almost to the bottom seal on the cooling jacket thereby avoiding premature condensation.…

  • Large scale sublimation apparatus constructed of heavy wall glass. Will sublime 100gms of solid sample. Cold finger tube positions in center neck and is held by a plastic bushing to a threaded condenser flask. All joints are PTFE-Clad to eliminate the use of grease and still avoid freezing. Kettle…

  • A semi-micro sublimer used by a number of synthesis laboratories. The proportions have been found to be optimum for handling a variety of crystal types. The circulatory stem may be removed and collecting tube filled with dry ice, acetone, etc. Complete unit consists of body, head and circulatory…

  • A 50mm size for samples of approximately 25mL With a #50 O-Ring joint, unit measures 200 mm high x 50 mm diameter. The stopcock is positioned so that the bottom can be firmly clamped. Use clamp No. 7670-18. Order clamps separately. For Replacement O-Ring, see 7855-748.

  • Two sizes, both featuring an O-Ring sealed, greaseless flange with 6517 Quick Release Clamp. Top flange is ground flat, bottom mating flange has an O-Ring groove for a CAPFE O-Ring (PTFE encapsulated silicone), held tightly together via a quick release clamp. Size 60 is 200mm high x 60mm I.D.; uses…

  • Two-piece grease-free sublimer with a flat bottom to enable heating on a hot plate stirrer. Condenser has a large top opening for use with dry ice / acetone or liquid nitrogen. Connection between the flask and condenser is made with a flat o-ring joint permitting parts to be gently separated for…

  • Two-piece sublimer consisting of an upper water cooled CONDENSERS and lower flat bottom flask. Sublimate is collected on the inner wall of the CONDENSERS. The two components are assembled by a grease-free o-ring seal which permits the components to be gently separated for maximum product recovery.…

  • Adapter permits sublimation directly in any reaction vessel having an standard taper outer joint; simply remove condenser or other apparatus from joint, insert adapter and begin. Adapter has two components, the cold finger condenser and vacuum adapter. Adapter has a #18 Chem-Thread to allow for the…

  • Micro Sublimer

    Chemglass

    Micro scale sublimer can be used with quantities as small as 0.5 grams. The sublimer has a capacity of 3mL between the lower portion of the cold finger and the interior bottom of the flask. With 24/25 standard taper joints to connect the flask and cold finger condenser.

  • A grease-free, two-piece sublimation apparatus consisting of an upper water cooled condenser and lower vessel to hold the material to be sublimed. The sublimate collects on the lower end of the condenser which has a flat bottom. Condenser is constructed using a grease-free, threaded valve.…

  • Support Base

    Chemglass

    …side. Rod is 10mm O.D. x 600mm (24”) in height. Total assembled weight is 1Kg. SUBLIMATION APPARATUS,Two-piece sublimer consisting of an upper water cooled CONDENSERS and lower flat bottom flask. Sublimate is collected on the inner wall of the CONDENSERS. The two components are assembled by…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.