Compare Tool

Select up to 3 products

1 - 32 of 825
  • Rubber Stoppers

    United Scientific Supplies

    Rubber Stoppers packaged in convenient 1lb bags. Available in solid, 1 hole, and 2 hole versions.

  • Solid Silicone Stoppers

    … Can be steam sterilized at 15 lbs. pressure, making them suitable for culture tubes containing pathogenic materials Length: 25 mm Not recommended for use with concentrated acids, bromine, carbon tetrachloride, butanol, iso-propanol or toluene. Packaged in a bag of 12 stoppers.

  • Premium Stoppers, Straight Plug with Coating

    DWK Life Sciences (Wheaton)

    …with the rubber itself are virtually eliminated. These stoppers are manufactured in a silicone-free environment. The specialized manufacturing process produces extremely low levels of visible and subvisible particles. These stoppers provide users the greatest level of confidence in avoiding…

  • Stopper Assortment


    Made of soft, pliable, black-compounded stock Length: 25 mm Includes stoppers of solid, one-hole and two-hole styles in sizes 00, 0, 1, 2, 3, 4, 5, 6, 6 1/2, 7 and 8; total of 66 stoppers

  • Hubbard-Carmick Specific Gravity Bottle, 25 mL, 24 / 12


    …etc. For ASTM Standards D 70, D 115, D 234, and D 1963; also for AASHTO standards T-43, T-151, and M-125; and ANSI Methods A37.71 and K34.1 Standard taper 24/12 solid stopper, concave on the under side, with central opening 1.6 mm bore Diameter at bottom 39 mm, height without stopper 43 mm

  • Expansion Plugs, Black Rubber


    Tapered rubber stoppers assembled with stainless steel hardware and a wing nut, provide a mechanism to make an expandable rubber plug. This ensures seals and keeps plugs from working their way out, as well as allowing the plugs to resist added pressure. They are fully customizable from hardware…

  • Plug-Type Rubber Sleeve Stoppers

    DWK Life Sciences (Kimble)

    Uses include outgassing NMR tubes, pressure venting or adding reactants via syringe. Hollow, plug-type stopper fits into the neck of the glassware apparatus Sleeve extension fits over the neck for a secure seal Diaphragm can be punctured with a syringe needle Series 774261 may be…

  • One-Hole Rubber Stoppers


    Size No. 000, 00 and 0 have hole 3 mm diameter; sizes No. 1 and 2 have hole 4 mm in diameter; all other sizes have hole 5 mm in diameter.

  • Rubber Stoppers


    …for added chemical resistance Listed mainly by trade-size, available in solid, one-hole, and two hole rubber stoppers. Uses vary widely, some are outlined below: Carboy Stoppers Crucible Holders Laboratory & Test Tube Stoppers Masking Applications Micro Stoppers Pipe Plugs Tube Stoppers

  • Stopper

    DWK Life Sciences (Kimble)

    These stoppers are used as an accessory for microscale threaded Standard Taper 14/10 kits. Pennyhead stopper sizes 10/18 through 19/22 are solid borosilicate glass Sizes 24/25 and larger are hollow borosilicate glass Manufactured from 33 expansion, low extractable borosilicate glass…

  • Filter Flask with Stopper Joint

    Wilmad LabGlass

    This borosilicate glass heavy wall filtering flask can be used with FILTERWARE® Filtration Apparatus (LG-1755). Supplied with a silicone stopper with 9/16" hole and a #2 hose connection, the 4000mL flask has 1/2" connections.

  • 20mm Snap On Stoppers

    J.G. Finneran

  • #12 Silicone Rubber Stoppers

    DWK Life Sciences (Kimble)

    This rubber stopper is an accessory for Kimble 4L flasks 27060-4000, 27065-4000, and 27070-4000, as well as 90mm funnnel 953805-0090.

  • Poly-Cone Universal Joint Adapter

    Bel-Art Products

    This precision-engineered adapter may be cut with a fine-tooth saw or sharp knife into various adapters, such as individual bushings, stirrer bearings, thermometer and gas inlet tube supports, drip-tips, funnels, trap connectors for tubing, etc. Forms a continuous standard taper inside and…

  • PYREX® PTFE Standard Taper Keyhole Stoppers, Color-Coded


    …PYREX® keyhole stoppers are made from polytetrafluoroethylene (PTFE) and conform to Standard Taper stopper dimensions. The color-coded keys make sorting and selecting the correct size much faster and easier. These stoppers may be used in place of conventional glass Standard Taper flask stoppers.

  • Silicone Stoppers with Holes

    DWK Life Sciences (Kimble)

    General purpose single-hole silicone rubber stoppers. Steam autoclavable Opaque yellowish-white color Stoppers are manufactured from pure silicone rubber

  • Sani-Tech® Silicone Stoppers

    Saint Gobain

    Sani-Tech® ultra-pure platinum-cured silicone stoppers outperform standard neoprene and rubber stoppers in critical laboratory and process applications. These long-life silicone stoppers are fully autoclavable and sterilizable and will not crack, spallate or invoke particle migrations that can…

  • Cork Stoppers

    GSC International, Inc.

    Quality, laboratory grade Cork Stoppers. Available in the following sizes: Size 000 Size 00 Size 0 Size 1 Size 2 Size 3 Size 4 Size 5 Size 6 Size 7 Size 8 Size 9 Size 10 Size 11 Size 12 Size 14 Size 16 Size 20 Size…

  • Stoppers


    Stoppers - Test Tubes 11-12 MM (1211Z88) Product Dimensions (l x w x h) : 0x0.463x0.622in Natural Test Tube Stoppers. Low-Density Polyethylene, 11mm-12mm tubes. Single- position tight fitting stopper to fit disposable test tubes.  Stoppers - Test Tubes 16 MM (1211Z93) …

  • Twistit Convertible Stoppers


    Unique seal system allows use as solid or one-, two- or three-hold closures Simplifies stock room inventory Molded of soft, resilient, white natural rubber Seals vacuum-tested to 760 mm Hg Autoclavable, with good shelf life. Sizes #3 & #4 have two holes; #5 - #10 have the (3)…

  • PYREX® Polyethylene Standard Taper Stoppers


    …PYREX® stoppers are made from linear high-density polyethylene and have closed bottoms to conform to Standard Taper stopper dimensions. The three rings on the plug provide an efficient seal. This improved design fully protects the neck in the event of accidental tipping. These stoppers may be used…

  • Sleeve Stoppers & Plugs


    …a double seal .Septa area allows insertion of needle, with excellent re-sealing properties for air sensitive chemistry Standard Compounds include Red and White Natural Rubber, Gray Butyl on select sizes Custom Sleeve Stopper Compounds available: EPDM, Nitrile, Neoprene, Silicone and Viton®

  • Cork Borer Sets with Handles, Plated Brass Set


    These inexpensive sets are used to bore holes in corks and rubber stoppers. They consist of plated tubing with precision ground cutting edges. The smooth plastic handles are stamped with a number designation. A punch is included with each set.

  • Neoprene Rubber Stoppers


    …to temperatures up to  120°C Usable with petroleum products, vegetable and mineral oils and fats which deteriorate natural rubber Standard length: 26 mm Increased functionality over rubber stoppers at elevated temperatures. Not recommended for use with very light oils, such as kerosene.

  • PYREX® Hollow Combination Standard Taper Joint and Reagent Bottle Stoppers


    …These hollow stoppers are light in weight, yet very strong to reduce chipping and breakage, thus minimizing replacement costs. A barrel-shaped head means it is easy to clean and even easier to rotate in or out. Grooves in the sides help prevent slippage. The flat top allows the stopper to stand on…

  • Glass Pennyhead Stopper, Standard Taper 24/40

    DWK Life Sciences (Kimble)

    Hollow plug type With sealed bottom and vertical penny head

  • Cork Boring Machine


    Designed to mount on any tabletop, the Humboldt Cork Boring Machine has an adjustable guide that permits holes to be bored in any part of a stopper. The knurled chuck accommodates the 9/16" (14mm) shank of the eight, plated-steel borers included with the unit. The steel borers range from 3/16" to…

  • Stopper No. 22 Cs 6

    DWK Life Sciences (Kimble)

  • Plug, Nylon, HDPE or PTFE, Back seal

    Ace Glass

    A back-seal, solid plug for sealing coulmn ends. Supplied with one FETFE O-Ring.

  • PYREX® Solid Glass Pennyhead Standard Taper Stoppers


    Pennyhead stoppers are generally used in flasks and separatory funnels.

  • PYREX® Hollow Glass Standard Taper Stoppers


    …in the sides help prevent slippage. The flat top allows the stopper to stand on its head, which frees the user's hand and minimizes potential contamination. This PYREX® stopper is interchangeable with other common flask stoppers and fits all standard labware of comparable Standard Taper size.

  • HDPE Stopper No 13


    …PYREX® stoppers are made from linear high-density polyethylene and have closed bottoms to conform to Standard Taper stopper dimensions. The three rings on the plug provide an efficient seal. This improved design fully protects the neck in the event of accidental tipping. These stoppers may be…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.