Stirrer

Compare Tool

Select up to 3 products

Stirrer
1 - 32 of 669
Sort
View
Show
  • Stirrer

    Globe Scientific

  • Stirrer Blades PTFE construction Fit all standard shafts Will not scratch glassware Hole diameter: 6.5 mm Model 8596G58 to G70 shafts are for use with 8596G18 to G50 blades.

  • Turbine-Driven Stirrer

    GFS Chemicals

    …is obtainable by pressure regulation Plastic with brass bearings Completely immersible, allowing use in water baths Several stirrers can be connected in series Housing, 3” diameter x 3/4” thick, encases driving magnet, which is mounted in vaned rotor. Maximum…

  • Accessory for OS20-Pro LCD, OS40-Pro LCD, OS20-S LED and OS40-S LED Digital Overhead Stirrers. Blade stirrer Gentle processing samples, used at low and medium speeds Polytetrafluoroethylene (PTFE) coating has low coefficient of friction against a solid

  • Stirrer Accessories

    Arrow Engineering

    …(10 mm) diameter motor shafts Keyless Chuck, Nylon-bodied Fits 3/8” (10 mm) diameter motor shafts Adjusts to accept stirrers from 1.5 mm to 10 mm o.d. Couplings Flexible coupling with PTFE sleeve for use with glass stirring shaft The 4"…

  • Accessory for OS20-Pro LCD, OS40-Pro LCD, OS20-S LED and OS40-S LED Digital Overhead Stirrers. Blades open with increasing speed for stirring in a round vessel with a narrow neck, used at medium and high speeds Polytetrafluoroethylene (PTFE) coating

  • PC-611 Stirrer

    Corning

    …Corning® PC-611 stirrers have an 11 x 11 inch plastic (ABS) top and can stir large volumes of liquid with ease. These stirrers are designed for 5 gallon vessels (19L), but can stir up to 10 gallons and can handle many applications that previously required an overhead stirrer. This powerful stirring…

  • The HP11 magnetic stirrer is suitable for stirring liquids with different viscosity ratings, up to 2 gallons in volume. Includes 2 PTFE-coated stir bars. Heating plate diameter: 11". Min speed: 110 RPM. Max speed: 2000 RPM. Stainless steel probe length: 11". Probe…

  • Stirrer Coupling

    Chemglass

    The design of our Flex-Drive stirrer coupling eliminates the need to use rubber hose or universal adapters to attach your glass stirrer shafts to overhead motors. Coupling incorporates a 3in long epoxy coated spring to compensate for misalignment and to help isolate breakage. Lower end of coupling…

  • Mini Magnetic Stirrer

    labForce (a Thomas Scientific Brand)

    …every time. The mini stirrer is made from an ABS and PC blend that is chemical resistant making the unit easy to clean. The low-profile design is lightweight for transporting with ease and the small footprint saves valuable space on a bench top. The mini stirrer offers quiet operation with…

  • Stirrer Accessories

    Thermo Scientific Nalgene

    Impellers made of stainless steel (8592H39 through H48) or glass-filled propylene (8592H36) Autoclavable 8592H36 Lower Assembly/Shaft and Impeller; shaft length x diameter: 13-1/2" x 3/8"; impeller diameter: 4". 8592H39 Lower Assembly is for use with the Nalgene 30-gallon,…

  • Magnetic Induction Stirrer

    labForce (a Thomas Scientific Brand)

    The Magnetic Induction Stirrer is motor-less, using advanced coil technology that produces the strongest magnetic coupling and has no moving parts making this unit 100% wear-free and maintenance free. The magnetic induction stirrer is ideal for use in general research, life science,…

  • Stirrer Shafts

    Chemglass

    Precision ground and polished stirrer shaft for use with Chemglass process reactors. Designed to utilize CG-2095 and CG-2096 PTFE agitators. Lower portion of stirrer shaft is sandblasted and has a 3/8” wide flat.  Please Note: CG-2097-75 and CG-2097-100 are made from heavy wall tubing…

  • Stirrer Bearings

    Chemglass

    Grease-Free PTFE stirrer bearing for use under moderate vacuum. The bearing consists of a PTFE standard taper body, Nylon compression cap, PTFE Insert/bushing and a Nylon loosening nut. The PTFE insert/bushing provides only glass and PTFE contact with the reaction. Loosening nut above the standard…

  • Hotplates, Stirrers and Hotplate Stirrers

    labForce (a Thomas Scientific Brand)

    …from 60 to 1500 rpm Temperature control up to 380°C Three models: heat-stir, heat only or stir only labForce hotplates, stirrers and hotplate-stirrers feature an exceptionally durable, aluminum material with a chemical resistant white ceramic work surface. Their space-efficient…

  • Digital magnetic stirrer with heating; the MSH-300i Intelli-stirrer is designed for laboratories with higher requirements. It offers digital setting and control of temperature and rotation speed. A powerful magnet allows mixing solutions with glycerine viscosity level. Maximum volume of stirred…

  • …60-2000 rpm Stepless speed control Ambient temperature range: 5 to 40°C The RW 20 digital stirrer offers two speed ranges for universal use from 60 to 2000 rpm. Stirrer has a slim ergonomic design, digital display and constant power drive. Push-through agitator shafts are…

  • Precision bore bearing for use in moderate vacuum with a CG-2074 or CG-2075 ground 10mm stirrer shaft. NOTE: Not for use with CG-2078 or CG-2079 polished stirrer shafts.

  • Reliable and Precise Bright digital display for accurate speed monitoring On board timer for unattended operations Auto reverse of the stirring direction to ensure better mixing SpeedServo ™ technology ensuring costant speed counter reacting to viscosity changes …

  • Magnetic stirrer fleas

  • …construction Corrosion-proof Speed range: 0-800 rpm Usable in hazardous locations, baths, incubators or other areas where electric stirrers are impractical Operates on water or air pressure between 15 and 40 psi. Knob regulates air/water pressure to control stir speed. Rated…

  • Assembly consists of a 10mm OD Chem-Stir™ stirrer shaft, a precision bore-bearing having a standard taper inner joint and a PTFE blade. The blade is sized to fit the listed flask capacities.

  • Digital and Hotplate Magnetic Stirrer

    labForce (a Thomas Scientific Brand)

    Benchmark Scientific Hotplates and Stirrers provide reliable performance and safe operation for everyday laboratory use. Like our popular 7 x 7-inch series, these hotplates/stirrers feature a durable, chemical resistant white ceramic top plate and advanced microprocessor controls. The constant…

  • Precision PTFE Stirrer Bearings

    Wilmad-LabGlass - SP Scienceware

    …not recommended for use with this bearing. Complete 10mm diameter assembly includes PTFE stirrer bearing, PTFE bushing, saddle O-ring (LG-9470-300), threaded heavy wall borosilicate glass adapter, and top cap (LG-10818-114). See LG-9501 for polished stirrer rods or LG-9502 for stainless steel rods.

  • Stirrer blade made of 1/8" thick solid PTFE for use with both Chem-Stir™ and button style stirring shafts having a 10mm OD.

  • Polished Glass Stirrer Shafts

    Wilmad-LabGlass - SP Scienceware

    Precision ground and polished, these borosilicate glass stirrer shafts have a 10mm O.D. For use with LG-9475T bearing with PTFE bearing surface, or other bearings with a PTFE interface with the same bore. Features a side button at bottom for attachment of any of the stirrer/stirring blades (LG-9505…

  • Cimarec+™ Stirrer Series

    Thermo Scientific

    Thermo Scientific™ Cimarec+™ series digital stirrers offer precise stirring control, exceptional safety and temperature performance for your routine protocols. The Cimarec+ Series are available in three sizes, providing flexibility from microscale chemistries to production operations. …

  • ThinSpin™ Magnetic Stirrer

    Argos Technologies

    The ThinSpin™ Magnetic Stirrer from Argos Technologies is an ultra-thin, light-weight piece of equipment that can be programmed to mix and stir between 15 and 1500 rpm. The preset speed is 15 rpm, but speed can be easily adjusted in increments of 15 rpm. Each time the speed is changed the…

  • The Scilogex FlatSpin Stirrer is an ultra-flat compact stirrer ideal for stirring applications. Its space saving design minimizes bench space and portable due to its light weight. FlatSpin Analog Stirrer Features: Speed range 15-1000rpm Automatic reverse rotation for excellent…

  • RT2 Basic Hotplate Stirrer

    Thermo Scientific

    Rely on the accuracy of our low-profile analog hotplate stirrer for your routine applications. Each unit is equipped with hot top warning and built-in temperature shut-off. Features Overheat prevention circuit turns off the heater if the top plate temperature reaches 450°C …

  • Grease-Free PTFE stirrer bearing designed for use under moderate vacuum applications. The bearing consists of a threaded glass adapter having an inner joint, a set of PTFE washer style bearings, a stainless steel spring, nylon alignment ring and Celcon® compression cap. The unique design of this…

  • Useful for mounting stirrers and other general equipment to lab frames. Small physical size takes up very little space. Solid aluminum construction holds items up to 4.3 lbs.

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.