Stirrer Stand

Compare Tool

Select up to 3 products

Stirrer Stand
33 - 64 of 79
Sort
View
Show
  • 5L ChemRxnHub™ Process Systems

    Chemglass

    ChemRxnHub™ process systems are complete with benchtop stand, overhead stirrer and glassware. Available with the optional manifold connection and heat transfer fluid draining system. The unique design of the ChemRxnHub™ support stand and clamping system allows for quick and easy…

  • 1L ChemRxnHub™ Process Systems

    Chemglass

    ChemRxnHub™ process systems are complete with benchtop stand, overhead stirrer and glassware. Available with the optional manifold connection and heat transfer fluid draining system. The unique design of the ChemRxnHub™ support stand and clamping system allows for quick and easy…

  • Benchtop Support Stand, Mobile

    Chemglass

    …Similar to the CG-1950-100, but reactor stand is mobile and is designed to fit into most walk-in hoods. Allows small scale reactors to be setup in walk-in hoods near existing heater/chillers. Stand can hold a single reactor or two reactors side by side. The stand provides support for the Reaction…

  • G.K.H. Stir Systems

    Glas-Col

    …slower speeds for stirring more viscous mixtures. Stirrers include motor, mounting bracket, 3-jaw keyless chuck, paddle, propeller and a right angle clamp. NOTE: Model 8836M34 Lab Stand is recommended to mount GT31 Stirrers. GT24 Stirrers (8585H60 and H64) Cool, quiet-running motors Torque:…

  • Universal Overhead Stirrer, Model BDC3030

    Caframo

    …torque stirrers are designed and engineered specifically to meet the continuous demands of heavy industrial use. The heart of the BDC line is the high performance Brushless Direct Current (BDC) motor. A unique two speed transmission provides incredible amounts of power. Caframo stirrers are quiet,…

  • Talboys Overhead Mixers, Model 104 & 104X

    Troemner

    …shaft handles high viscosity mixing. Mixers include collet chuck and 8" (20.3cm) mounting rod with carriage bolt and wrench for mounting motor to support stands. Support stands and holders sold separately. Durable and rugged multi-purpose mixers Wide range of speeds Moderate torque

  • Talboys Overhead Mixer, Model 107 & 107SC

    Troemner

    …Model 152A propellers. Both models have a continuous duty rating. Mixers include collet chuck and 8" (20.3cm) mounting rod with carriage bolt and wrench for mounting motor to support stands. Support stands and holders sold separately. Direct drives Brushless motors Fan cooled

  • Benchtop Support Stand, Single Setup

    Chemglass

    …Attachment of an Overhead Stirrer. Mounting Clamps Accept a MAX Support Arm Of 5/8” Diameter.   Unique Design Allows Easy Installation/Removal of Glassware.  Compact Foot-Print: 14”W x 15”D x 40”H This benchtop support stand is constructed of…

  • Reversing Digital Overhead Stirrer, Model BDC2010

    Caframo

    …lights up so that solutions can be seen clearly. The Reversing Digital Stirrer is powered by a brushless DC (BDC) motor. The belt driven transmission is smooth, quiet and maintenance free. Ordering information: Clamp, stand, and impellers are available. Chuck (adjustable up to 10 mm or 3/8…

  • Petite Digital Overhead Stirrer, Model BDC250

    Caframo

    …need assembled into a complete stirring package. Included in each purchase: overhead stirrer motor, integral clamp, stainless steel collet, external power supply, grounded power cord, stand, axial and radial mixing blades, mixing shaft, manual in four languages (English, French, Spanish…

  • Ultra Torque Overhead Stirrer, Model BDC1850

    Caframo

    stirrers are designed and engineered specifically to meet the continuous demands of heavy industrial use. The heart of the BDC line is the high performance Brushless Direct Current (BDC) motor.  A unique two speed transmission provides incredible amounts of power. Caframo stirrers are quiet,…

  • Ultra Speed Overhead Stirrer, Model BDC6015

    Caframo

    …torque stirrers are designed and engineered specifically to meet the continuous demands of heavy industrial use. The heart of the BDC line is the high-performance Brushless Direct Current (BDC) motor. A unique two speed transmission provides incredible amounts of power. Caframo stirrers are quiet,…

  • Compact Digital Overhead Stirrer, Model BDC2002

    Caframo

    …With the push of a button, the unique Stirlight™ lights up so that solutions can be seen clearly. Included in each purchase: Overhead stirrer motor, chuck, chuck key, support rod, external power supply, grounded power cord, manual in four languages (English, French, Spanish and German)…

  • Model TEM Stirmantles

    Glas-Col

    Heating Mantles/Stirrers in Self-Standing Metal Case Eliminates need for mantles with holes or very thin insulation that will accommodate separate stirring devices The optional EMC-4 StirControl II (Thomas number 5912M10) creates and synchronizes a rotating magnetic field within the StirMantle…

  • BioReactor

    Chemglass

    …Inc. Broadley-James® and Broadley-James Corporation® are registered trademarks of Broadley-James Corporation. STIRRERS, COMPLETE, BIOREACTORS, Stand alone stirrer will fit the Applikon style vessels from 1 to 7 liter. The motor has incredible power for its size, 91 in-oz. Control box…

  • Crossover Batch Mixer, Model 1540

    Caframo

    …memory stick. Install immediately with standard 120V cord set, and four bolt mounting. Optional plate or C-clamp set attaches the Crossover to a stand or drum and allows optimal shaft angle in vessel. Includes chuck, chuck key, chuck shaft guard, installed screen protector, USB memory stick,…

  • Dual Motor Speed and Power Controller, Solid State

    Ace Glass

    …-150 volts, variable, filtered approximately 1/2 hp.max. 3 amps. A solid state control with rugged control regulation and rectification circuitry. AC and DC work in conjunction. Fwd-Off-Rev. DC control switch only. Fused for AC and DC outputs, 10 amps and 3 amps respectively. Rear ring stand clamp.

  • Motor Controller, Solid State

    Ace Glass

    Rated 1 hp. for use with most stirrer motors. Not for use with shunt wound DC motors. A compact, lightweight, solid state, ring stand mountable control unit, both AC and DC outlets. Pulsed AC gives better low speed torque than voltage dropping devices such as rheostat or transformer. AC output: 120…

  • LabJaws Support Plates

    Ohaus

    Designed to hold hotplates, stirrers, hotplate-stirrers, and other apparatus to lab-frames or ring stands. Aluminum construction offers strength and durability. Support plates include a non-skid rubber mat and a built-in holder that grips rods up to 0.75" (19 mm) in diameter.

  • sensION+ pH3 Laboratory pH Meter

    Hach

    All benchtop kits come complete with meter, probe, integrated magnetic stirrer, electrode stand, standards, calibration flasks and all required accessories, making it simple to grab the kit and begin testing immediately. A guided navigation menu allows you to follow simple prompts to set up your…

  • Reactor Support Frames

    Chemglass

    … PLEASE NOTE: FRAME IS SHIPPED ASSEMBLED IN A WOODEN CRATE VIA COMMON CARRIER, FOB VINELAND, NJ.;CLEARANCE BELOW VALVE ON CG-1968-X-10 IS CALCULATED USING A CG-2077-H PTFE STIRRER BEARING. WHEN USING THE MECHANICAL SEAL STIR BEARING, HEIGHT OF STAND OR CLEARANCE BELOW VALVE WILL NEED TO BE MODIFIED.

  • Chemstir 24 Volt Brushless DC Motor, 1/11 HP, 417RPM

    Chemglass

    …used in conjunction with a CG-2033-B-55 digital display controller. Support plate and rod design allows the motor to be mounted on the ChemRxnHub stand or on lattice in most hoods. Supplied complete with a Nylon body keyless chuck and a CG-9252-01 for mounting on ½” lattice in hood…

  • Dual Star™ pH, ISE, mV, ORP and Temperature Dual Channel Benchtop Meters

    Thermo Scientific Orion

    …computer with free Orion Dual Star Com communication software Stir samples with ease using the meter-controlled Orion Star stirrer probe Meter-attachable electrode stand assists with moving and maintaining electrodes IP54-rated housing handles splashes and is wall-mountable to save space …

  • Soxhlet Extraction Apparatus with Heating Mantle

    United Scientific Supplies

    …workstation. The setup includes a heating mantle with stirrer, 250ml borosilicate glass boiling flask, 100ml borosilicate glass Soxhlet extractor, 300mm borosilicate glass Allihin condenser with glass connectors, sturdy powder-coated metal support stand with aluminum clamp and stability bracket, and…

  • Stir-Pak® General-Purpose Mixers

    Oakton

    …shafts from 5/16" to 3/8" (8 to 10 mm) dia. Mixer includes: 3/8" (9.5 mm) dia x 12" (305 mm) L, 316 stainless steel shaft; 1-1/2" (38 mm) dia propeller; 6" (152 mm) mounting rod; and 6-ft (1.8 m) grounded cord with power supply. Complete system adds: double clamp and support stand.

  • Stir-Pak® Dual-Shaft Mixers

    Oakton

    … Keyless chuck accepts shafts from 5/16" to 3/8" (8 to 10 mm) dia Mixer includes: Controller 6" (152 mm) L mounting rod and 6-ft (1.8-m) three-wire cord with plug Complete system adds: 3/8" (9.5 mm) dia x 12" (305 mm) L, shaft; 3" dia (76 mm dia) propeller; double clamp; and support stand

  • 30L Process Reactor System

    Chemglass

    Complete reactor system on our NEW open air stand.  PLEASE NOTE: REACTOR STAND OVERALL HEIGHT WITH MOTOR AND CLEARANCE BELOW VALVE, ARE CALCULATED FOR ALL CHEMGLASS STIRRER BEARINGS, INCLUDING THE CG-2077-M MECHANICAL SEAL STIR BEARING. Features: Motor Mount Arm Can Unlock…

  • 50L Process Reactor System

    Chemglass

    Complete reactor system on our NEW open air stand. PLEASE NOTE: REACTOR STAND OVERALL HEIGHT WITH MOTOR AND CLEARANCE BELOW VALVE, ARE CALCULATED FOR ALL CHEMGLASS STIRRER BEARINGS, INCLUDING THE CG-2077-M MECHANICAL SEAL STIR BEARING. Features: Motor Mount Arm Can Unlock And…

  • Orion™ Star A and Versa Star™ Accessories

    Thermo Scientific Orion

    …for accurate readings Dedicated stirrer port for Orion Star stirrer probe aids in quick and easy sample mixing Fixed front slot works with ATC probes (using the included adapter) or other 12mm dia probes Use to update existing swing arm stands (090043) or as a replacement electrode…

  • Dissolved Oxygen Field Probe

    Thermo Scientific Orion

    …with the Thermo Orion 862A DO/BOD/Temperature Meter. The built-in stirrer provides vigorous sample agitation, preventing oxygen stratification and can easily be disassembled for cleaning. The probe stand, which is free standing, can be used to store the probe when not in use, and also functions…

  • Stir-Pak® and Servodyne™ Mixer Accessories

    Oakton

    …wall thickness) Support stand has an electropolished cast steel base and 303 stainless steel support rod measuring 29"H x 5/8" dia (737 mm H x 16 mm dia). Both legs of base accept an optional screw-in support rod. Optional screw-in support rod for 04552-80 stand Pivot-mount controller…

  • Star™ A211 pH Benchtop Meters

    Thermo Scientific Orion

    …and simple due to the comprehensive keypad with menu-specific function keys, dual purpose scroll/shortcut keys, plus power, measure, log view and stirrer keys that ensure easy operation. All setup menus are in one location with direct access using a single shortcut key so you can quickly access,…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.