Stirrer Shafts Ptfe

Compare Tool

Select up to 3 products

Stirrer Shafts Ptfe
1 - 32 of 54
Sort
View
Show
  • Stirrer Bearing, PTFE, 6-10MM Shafts

    Ace Glass

    PTFE stirrer bearing featuring a non-shedding, fully enclosed, anti-whip, chemically resistant design. Models available for 6, 8 and 10mm glass, metal or PTFE stir shafts. Can be used in slight pressure or vacuum applications. Maximum recommended speed for continuous operation is 500 rpm. Unlike…

  • Stirrer Blades, PTFE, Oval, 10mm Shafts

    Ace Glass

    PTFE oval stir blades for 10mm OD button type stir shafts. 10mm OD shafts can be found in our 8068, 8070, 8074 and 8075 series.

  • Stirrer Blades Banana Type, PTFE, 10mm Shaft

    Ace Glass

    PTFE banana shaped stir blades for 10mm OD button type stir shafts. 3mm thick blades have a number of perforations and are designed to closely fit various sizes of round bottom flasks. 10mm OD stir shafts can be found in our 8068, 8070, 8074 and 8075 series.

  • Polished Glass Stirrer Shafts

    Wilmad-LabGlass - SP Scienceware

    Precision ground and polished, these borosilicate glass stirrer shafts have a 10mm O.D. For use with LG-9475T bearing with PTFE bearing surface, or other bearings with a PTFE interface with the same bore. Features a side button at bottom for attachment of any of the stirrer/stirring blades (LG-9505…

  • PTFE Shafts and Propellers

    Arrow Engineering

    MUST BE ORDERED AS AN ASSEMBLY. A PTFE Propeller must be ordered together with a PTFE Shaft (each purchased separately).

  • Propeller Shafts

    Troemner

    All stainless steel 303/304 are constructed with 15° pitched blades which creates an axial flow. Various shaft lengths and diameters with permanent 2" or 3.5" 3-blade propeller for every mixing need available. PTFE coating available.

  • Impellers & Shafts for Caframo Overhead Stirrers

    Caframo

    PTFE impeller for low speed, higher viscosity mixing. The 80 mm (3 ?”) blade is attached to an 8 mm (5/16”) diameter PTFE-coated shaft, designed for use in round bottom vessels and reaction flasks. The stainless steel core of the shaft provides stability. PTFE

  • Stirrer Blades, PTFE

    Ace Glass

    PTFE stir blades for button type stir shafts. 10mm OD shafts can be found in our product series 8068, 8070, 8074 and 8075. 19mm OD shafts can be found in our 8076 and 8077 series.

  • Stirrer Accessories, Stirrer Blades

    Dynalon

    Stirrer Blades PTFE construction Fit all standard shafts Will not scratch glassware Hole diameter: 6.5 mm Model 8596G58 to G70 shafts are for use with 8596G18 to G50 blades.

  • Precision PTFE Stirrer Bearings

    Wilmad-LabGlass - SP Scienceware

    …not recommended for use with this bearing. Complete 10mm diameter assembly includes PTFE stirrer bearing, PTFE bushing, saddle O-ring (LG-9470-300), threaded heavy wall borosilicate glass adapter, and top cap (LG-10818-114). See LG-9501 for polished stirrer rods or LG-9502 for stainless steel rods.

  • Collar, Stir Shaft

    Ace Glass

    …to be used with 8068, 8070, 8071, 8074 or 8078 stirring shafts. Handy for positioning shaft in bearing, and preventing shaft from dropping into flask. Supplied with PTFE gasket to prevent scratching top of bearing and acts as dust cover. Available in either Glass-filled PTFE or 316 Stainless Steel.

  • Stirrer Accessories

    Arrow Engineering

    …(10 mm) diameter motor shafts Keyless Chuck, Nylon-bodied Fits 3/8” (10 mm) diameter motor shafts Adjusts to accept stirrers from 1.5 mm to 10 mm o.d. Couplings Flexible coupling with PTFE sleeve for use with glass stirring shaft The 4"…

  • Stirrer Accessories, Blades

    Dynalon

    …overhead stirrers. Virtually unbreakable Operate at medium to high vacuum Fit standard ground glass joints May be used with all types of standard shaft stirrers in PTFE, glass or stainless steel with 6 or 9.5 mm diameter shaft. Feature internal adjustable precision glass- PTFE

  • Agitator, PTFE, Multi-Paddle, 10mm Shaft

    Ace Glass

    PTFE multi-paddle agitator for 10mm OD drilled or knob type shafts. Paddles are replaceable. Fits 10mm OD drilled or knob type 8068, 8071 and 8079 shafts.

  • Agitator, PTFE, Turbine, For 10mm Shaft

    Ace Glass

    …turbine type agitator. Unique locking arrangement assures positive grip. Agitator fits 10 mm shafts. Shaft opening is drilled straight thru to allow positioning of agitator at any drilled position on shaft as well as the bottom. For use with bead type glass shafts, 8068-G, 8075 or PTFE shaft, 8071.

  • Agitator, PTFE, Single Blade, For 19mm Shaft

    Ace Glass

    PTFE agitator with removable blade secured with a PTFE pin. Supplied 3.2x15.2cm blade will fit through a 45/50 joint. Fits 19mm od drilled type or knob type 8076, 8078 & 8079 shafts.

  • Agitator, PTFE, Single Blade, For 10mm Shaft

    Ace Glass

    PTFE agitator with removable blade secured with a PTFE pin. Supplied 76mm long blade will fit through a 29/42 joint. Fits 10mm OD drilled type or beaded type 8068, 8071 and 8075 shafts.

  • Stirring Blade, For 5 & 6mm Shaft

    Ace Glass

    PTFE stirring blades for use with our button type 9524 and 9527 stirring shafts. Blades are 41mm wide x 12mm high and are designed for use in flasks 250ml and less. Match blade to shaft OD.

  • PTFE Gaskets

    Chemglass

    PTFE gasket is 0.015" thick with an opening to fit Chemglass stirrer shafts. Gasket is placed below the CG-2048 Safety collar to prevent wear as a result of the collar rotating against the stirrer bearing. Also useful as a dust cover.

  • PTFE Gasket

    Ace Glass

    Designed to fit 8068, 8070, 8071, 8074 or 8078 stirring shafts. Useful as dust cover and as replacement for gasket supplied with 8127 collar. Twelve to a package.

  • Scienceware® Stirrer Blades

    Bel-Art - SP Scienceware

    This strong, non-scratch and inert FDA grade, USP Class VI Teflon® PTFE blade fits all standard button-tip stirring shafts. "Long-groove" keyhole provides easy insertion into flask neck Rotates into proper position for stirring action

  • Stirring Shaft & Agitator, Glass or PTFE,5mm, Precision

    Ace Glass

    Stirring shaft agitator combination available in either a solid, precision ground glass shaft or all PTFE knob type shaft with a PTFE snap-fit agitator designed to fit through 14/20 and 18/11 joints. Designed for use with our 5mm ID 9524 or 9527 bearings and flasks of 50ml and smaller.

  • HI-LUBE Heavy Duty Liquid Stirrer Lubricant

    Ace Glass

    PTFE packing for use in 8112 stuffing boxes. This material conforms readily to the contour of the stuffing box and shaft.

  • Stir Shaft, Retreat Agitator, PTFE

    Ace Glass

    PTFE covered stainless steel shaft with a solid PTFE retreat curve agitator. Featuring a retreat angle of 30 degrees and, for a better grip by the stir motor chuck,50mm of exposed stainless.

  • Filter Reactor, All PTFE

    Ace Glass

    All PTFE filter reactor; an extension of the famous Ace borosilicate glass filter reactor product line. The head, head joints, body, stirrer bearing, valved bottom filter assembly, and stir shaft with agitator are all PTFE. Filter support is polypropylene. Large, Ace-Thred bottom filter assembly…

  • Stirring Shaft, PTFE covered stainless, 19mm, Precision

    Ace Glass

    Precision PTFE covered stainless steel stirring shafts, 19mm OD. Drilled type shafts accept 8091,8092,8093,8100 agitators and can be used in 19mm Trubore bearings (8059, 8060, 8061 & 8065). Not recommended for PTFE bearings 8050, 8067 and 13445. Join to stirrer motor using 8124 series chucks.

  • Stirring Shaft, PTFE Coated Glass, 10mm

    Ace Glass

    PTFE coating permits higher stirring speeds with Trubore bearings. If used unlubricated, 500 rpm max with water-cooled 8040 bearing. Compatible with 8036, 8038, 8039, 8043, 8047, 8051, 8055 and 13443 bearings. Button type shafts accept 8083, 8085, 8086, 8087 and 8096 stir baldes. Join to stirrer

  • Stirring Shaft, PTFE Covered Stainless Steel, 10mm

    Ace Glass

    PTFE covered stainless steel stirring shafts, 10mm OD, drilled type. If used unlubricated, 500 rpm max with water cooled 8040 bearing, 100 rpm max recommended with 8036, 8038, 8039, 8043, 8047, 8051 and 8055 bearings. With condensate film as added heat transfer agent, 2000 rpm can be attained.…

  • Stir Shaft, 4 Blade Propeller, PTFE

    Ace Glass

    PTFE covered stainless steel shaft with solid PTFE, 4 blade screw propeller. Blades are pitched 45 degrees. For a better grip by the stir motor chuck, 50mm of stainless is left exposed.

  • Bearing, Trubore, PTFE Liner for Polished Shafts, 10mm

    Ace Glass

    Self-aligning, lubricant free PTFE Trubore bearing or combination bearing / debris trap. Use with 8074 stainless steel or 8075 polished 10mm od glass shafts. Debris trap model prevents bearing-wear particles from contaminating the reaction vessel and has a side port for clean-out, evacuating or…

  • Bearing, Trubore, PTFE Inner Liner, 19mm and 28mm

    Ace Glass

    Self-aligning, lubricant free PTFE Trubore bearing or combination bearing / debris trap. Use with 8076 (19mm od) or 8080 (28mm od) polished glass stir shafts. Debris trap model prevents bearing-wear particles from contaminating the reaction vessel and has a side port for clean-out, evacuating or…

  • Stirrer, Complete

    Ace Glass

    Trubore stirrer assembly consists of the standard taper outer glass bearing, PTFE inner bearing, glass-filled PTFE bushing and lock nut, compression seal saddle o-ring, PTFE blade and either a glass or stainless stir shaft.

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.